Great product that does exactly what we need. Did not plan to put in a mop sink, but was forced to by code official. We are glad we were forced as the mop sink is very convenient and helpful around our brewery
3 years ago
Pleased with the product. Perfect size for my application
Happy with the design and size of this mop basin.
The only negative thing was that two of the corners were broken at the bottom of the basin. Does not affect the ability to use the basin, just a bit unsightly. I installed the broken corners toward the wall side so it is less noticeable.
3 years ago
This is a great product and it's very easy to install. The Mop sink comes with a 3"in. Drain but Home Depot offers an adapter to reduce the size if you wish. I like that feature especially if you don't have a 3"in. drain.
In the instructions it says to put the moisture resistant wall board 1/2" above flange. Are they talking about the green wall board and then install crete board over the top of that or are they talking about just putting the crete board 1/2" above the flange and then tiling the first row right onto the flange/crete board? Thank you.
2 years ago
Good shower pan for the money
This shower pan was purchased to replace an existing shower pan. The new pan arrived fairly quickly and installation was straight forward. I elected to install the pan on a mortar bed to insure there was no flexure which might ultimately lead to premature failure of the pan. I used thin set mortar and followed the recommendation in the instructions which came with the pan. The mortar was mixed a bit stiff and applied with a trowel to a thickness of about half an inch which tapered to a quarter
... read more of an inch near the pan. I used a marker to outline the pan on the subfloor to use as a guide for where to place the mortar. You only need to place mortar where the pan will actually contact the subfloor and you want to keep the mortar away from the drain if your subfloor comes right up to the drain--which mine did not. After setting the pan in place and aligning it with shims that I had stapled to the studs, I allowed it to sit overnight without disturbing it. The tricky part is to make sure the pan is completely orthogonal to the shower walls and spaced the correct distance so that the hardibacker boards will just overlap the lip of the shower pan. That required shimming the wall studs to make sure they were plumb vertically and all in alignment horizontally. Installing the drain gasket was a bit tricky as it is a very tight fit. I had to use a small piece of soft wood and a hammer to fully seat the gasket after it was covered with liquid dish detergent which acts as a lubricant to aid installation. Overall, a good looking solid pan. The pebbled finish on the pan floor looks fine and will definitely provide a non slip surface.
10 months ago
Easy to install. Works well. I like the texture pattern under my feet. They look like little pebbles. The drain was easy to install. It was perfect for our small bathroom
The shower base was installed by a professional. The installation was quick and the product is exactly what we expected. We are extremely pleased. The seat is very comfortable.
9 months ago
shower pan and seat
Ordered a Kohler custom shower pan with built in seat for a senior citizen installation and didn't see the product in person.
It came in beter then i thought, great finidh, built very strong and installation was perfect.
Would definitely recommend this product.
3 years ago
Just what we were looking for when updating a basement bath. Installation was easy. Product is excellent quality and will provide function and good looks to our updated bath
Shower pan liners are essential when installing a tile shower base. Oatay liner is the one I have used for years when needing to build custom showers. With this 5 foot by 40 Foot roll I can have on hand enough to build many shower bases without having to go to the supply store everytime. The liner is easy to install and very durable. Many years back the standard was lead liners and now PVC which is much safer.
Seeds Program Review
4 years ago
Non-slip dance floor
Shower pan liner makes a great non-slip covering for dance floors
5 months ago
Very durable and must for any DYI shower install!
This roll of shower pan liner is a must for any DIY shower pan installation. On one side it is pre-marked in 1 foot increments, so it's very easy to measure out and cut. Prods is extremely easy to work with and offers superior waterproofing protection! With optional glue, pan liner is easy to weld together if you need to make a piece wider than 5 foot. Can't go wrong here!
Two small issues.
• The base is not symmetrical (not true 38 X 38) so the shower can be installed with the door opening only one way.
• The drain is off center of the base. Results in me standing on the drain a lot.
9 months ago
It arrived at my home in good condition. Appears to be heavy well built and went in easy. It had good support under so did not have to mortar to set. Used roofing nails to anchor to studs. We will see how it holds up
1 year ago
Best purchase ever
This was what I really needed in my bathroom. It is really excellent quality shower base.
I ordered this product because I wanted something sturdy and substantial and that's exactly what I got. There is no bend when you step in the shower. It looks great and fit perfectly. Plus, it arrived almost a week early to the store which was exceptional. I'm very happy.
2 years ago
So far so good...
We have not actually had a chance to use this shower base yet as we are still working on our bathroom but so far we love it. Installation was a breeze, the only thing we had to modify was the amount of mortar that we used under the feet on the back of the base. We had to make those mounds about double the recommended depth so that the pan would be level. Other than that everything went in easily and the base feels extremely sturdy. Very pleased with our purchase and worth the extra money to get
... read more a quality product.
3 days ago
The first one had to be sent back. It was chipped and warped, the drain hole was too off center and even the Kohler name plate was not right. The second one was just about perfect though and it went in pretty easy. I followed the clear instructions to the letter and it is very nice. The tile installer had no issues with it during his install either.
My add on shower system for my master bath upgrade.
this sluter shower kit came with a cd to watch the installation . the nice thing about it is that you only have to use regular drywall because of the sluter membrane which when installed properly you can even run the shower before you even tile. The floor pan made tiling very easy and uniform as there were no worries of drainage pitch. We are very pleased with a 4 x 4 foot shower stall which is much roomier than our old fiberglass insert.
2 years ago
watch the video and fallow the steps.pretty easy!
We saved a lot of time compared to laying a full mortar bed.We bought ours over-sized and cut it down to 42 x 40 with a circular saw it was very simple.Make sure you have a good true trowel for leveling out the thinset and the Kerdi on the walls.We did not use the curb in our application.I wish you could buy it with or without the curb.
1 month ago
Schluter shower kit
First time user and was pleased with fit and function of the kit. Only problem I found was the fact that Home Depot sells the kits but didnt have the thinset called for by schluter in stock though I did find some ditra set at another store on the way home. Plus it would be nice to just go to the store and get one instead of waiting a week for order..