Project Panels

Sort By:

Select 2 to 4 Items to Compare

Compare
  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
$11.75 / each
1/2 in. X 2 ft. X 4 ft. PT CDX

Model # 1500104

  • • In Store Only
  • • Pick Up In Store TODAY Free

12 Options Available

  • • Ship to Home
  • • Not Sold in Stores
$15.88 / each
23/32 in. x 2 ft. x 4 ft. Treated Pine

Model # 1500124

  • • In Store Only
  • • Pick Up In Store TODAY Free
$6.76 / each
DRIcore 1 in. x 2 ft. x 2 ft. Aspen Insulated Panel

Model # CDINSU875002402

  • • Ship to Home
  • • Not Sold in Stores
  • • Ship to Home Free with $45 Order
  • • Ship to Store Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
$4.97 / each
3/8 in. x 2 ft. x 4 ft. Cork Panel

Model # 205651

  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
$4.97 / each
3/8 in. x 2 ft. x 4 ft. Cork Panel

Model # 205651

  • • In Store Only
  • • Pick Up In Store TODAY Free

12 Options Available

  • • Ship to Home
  • • Not Sold in Stores
  • • Ship to Home
  • • Not Sold in Stores

Search Feedback

Did you find what you were looking for?

Tell us about your search experience. Your comments will help make our site better.

Thank you! You have successfully submitted feedback for this search.


Average rating for Project Panels
(4.4 / 5)
4,105 Reviews
  1. 5 days ago
    Cheaper then lumber
    I've used these all over the house so far and will continue to buy more.
  2. 2 years ago
    Excellent purchase
    Just received 3 sheets of 3/4 inch Walnut ply. It is plane sawn and book matched. only two repeats per sheet. Perfect condition, outstanding packaging, and fast delivery. Back side is somewhat stained, but at least half can be used as the 'A' side. No voids in plys. Only one big box store carries it in our area and it would cost me more to pick it up (120 Miles) than shipping. Using it for an entertainment center and the 2X4 are easy to handle. All three sheets show the same coloration and ... read more match. Local lumber company can special order, but agin has no panel saw and the cost is greater. Paul
  3. 2 months ago
    Beautiful Panel
    This is a beautiful panel that will be used as the top to a cabinet I'm building. The panel is absolutely dead flat and the various plies seem to be dimensionally stable. The grain on the veneer is well matched. The size of the panel makes it perfect for shop projects. It's difficult, especially in a 1-person shop, to cut down full 4x8 sheets of plywood. No problems with this one at all.
    Seeds Program Review
  1. 1 year ago
    Grate Product at a Great Price
    This Item was Easy to Order and It was a Great Product for the Project that I was working On .
  2. 7 months ago
    Nice product
    These rounds were very solid and nicely constructed. Much nicer than many I have seen in other stores.
  3. 1 year ago
    just needed the top!
    for those looking to replace a top to a table this worked just fine. good weight so it is not tippy an excelent value.
  1. 1 month ago
    Beautiful veneer!
    I have used many of these panels with different species of veneer. ALL of them are good quality with few voids. This mahogany and the walnut are the most beautiful veneers so far. I like the maple too, but since it is so hard, it absorbs finish differently than the walnut or mahogany versions. This takes finish well and the natural wood colors "POP" under simple shellac and wax finish. The rotary-cut veneer leaves a very straight grained surface that looks almost too good to be true. Highly recommended!
    Seeds Program Review
  2. 2 months ago
    Nice piece of ply
    I'm using this for furniture and this is a nice strong piece of mahogany plywood. The finish is super smooth. This product is not sold in stores so you'll need to order it online. My other half thought I was crazy when I received a cardboard box that contained a piece of plywood, but when there are no local suppliers of this type of material, that's what you have to do. This is furniture grade so use a fine toothed saw blade.
    Seeds Program Review
  3. 2 years ago
    Quality Product
    I am using these panels for a wall in my office, have been very pleased with the quality and grain with these panels. I just wished they were stocked in the store.
  1. 3 years ago
    Perfect for DIY upholstered headboard.
    I am a beginner to DIY, and extremely satisfied with this product. The surface was smooth and light colored that I could paint on it; the board was easy to cut with the cheapest jigsaw; Also it was easy to adhere with just wood glue. I am not an expert but I heard fusses about the difficulties of stapling on some high density boards, yet this product is just about perfect dense for hand staple guns. I bought a spare board just in case of the measurement isn't right, which I didn't need at all. ... read more The measurement was perfect. To anyone who wants to start DIY headboard project, I would recommend this product.
  2. 3 years ago
    Satisfied
    Both sides had OK looking veneers. Not furniture level, but displayable, without unsightly knots. The surface veneer was thick enough to work with. Overall a step down from cabinet grade, but much better than the rest in HD. Biggest plus, formaldehyde-free.
  3. 4 weeks ago
    Pretty piece of plywood
    Really liking the look of this piece of plywood. Nice grain. Not too prominent nor is it curly or figured. Just looks good. The project panel plywoods all appear to be of very good quality, and so is this one. I've yet to come across any significant voids or blemishes, only ran into one (on another sheet) and that was less than 1/32" and was in one of the interior plys. Having it shipped is a great way to go. Comes packaged in good cardboard and sandwiched between two sheets of very still ... read more cardboard. No dings or frayed edges. I don't think I could pick one up at the store and get it home in the same condition.
    Seeds Program Review
  1. 2 years ago
    Nice material
    The board I received was dead flat and square, with no visible flaws, voids, delaminations, or splintered edges. Both surfaces are attractive veneers with good thickness and finish. One side is pre-finished with a nice hard polyurethane-type finish, the other side is bare veneer. This can save you the trouble of finishing the surface. Perfectly suited for cabinetry or furniture. Rather expensive for a quarter sheet of plywood, you'll only want to use it in applications where the surface shows ... read more and you care what it looks like. What else can you say about plywood? Really nice stuff, easy to work with. Shipping was extremely fast.
  2. 6 months ago
    Kitchen cabinets
    Been building my kitchen cabinet box frames using this product. The plywood is wonderful to work with and looks great. The prefinish removes a tedious step for DIY projects. They cut clean, but use some painter's tape over the cut line, for extra piece of mind. Kevin, the Columbia rep, has been a great deal of help through my project and I wish to acknowledge that. Shipping is very fast. All in all I am so happy the way my interior cabinets look and saved loads of money in the process.
  3. 2 years ago
    REALLY nice stuff
    I was already a big fan of the Columbia PureBond plywood so I figured I would try out the pre-finished maple. My intention was to use this for some shop jigs, but it's almost too nice! As with all the purebond plywood, the quality is exceptional. Very stable, awesome cores. Thick veneers and I have yet to find a void in any piece I have cut into. The finish is similar to the finish on pre-finished flooring. Very tough UV cured and can take abuse well. It is very even in both coverage and ... read more sheen. This would make creating custom cabinet shaker panels a breeze. Nice grain on the veneer and pre-finished. I would definitely recommend this to anyone.
  1. 1 year ago
    Excellent Quality.
    The piece of plywood that I received was very high quality. The sheet was very flat (probably within a 1/16th across the entire surface). The thickness was also very uniform (within one or two thousandths) and the veneer was blister and wrinkle free. All in all, I couldn't have asked for more. One observation, the venner did chip out significantly when cut with a dado stack on the table saw. Just an FYI to anyone planning this operation on this product. A router might have given a smoother edge.
    Seeds Program Review
  2. 1 year ago
    Good looking veneer product
    This is s nice product, suitable for cabinet work. It is not plywood in the sense that there are multiple layers of wood as the core. The core appears to be wood wafers bound with a resin instead. This can have an advantage in that the product is a bit more stable than ordinary plywood as respects warp. The hickory veneer has a nice grain. I am using it for the backs of finished cabinets with the insides also stained and finished. The product is fine sanded and ready for finishing. In the 2-ft. ... read more x 4-ft. size I got, it is easy to transport in a mid-size car.
    Seeds Program Review
  3. 2 weeks ago
    Great looking plywood
    All 4 of the sheets had damage, I was able to work around it but still a issue, the grain of 3 1/2" sheets even matched, I am sure they did it purpose, but it a pleasant surprise say the least.
  1. 3 years ago
    Excellent plywood; was perfect for my Shaker Boxes!
    I steam bent some cherry wood and made Shaker Oval Boxes for Christmas. I needed the tops and bottoms to be cherry plywood. Solid cherry for this purpose could result in wood movement and possibly crack the bent cherry used for the sides of the boxes.. This plywood had no voids between the plys and no blemishes on either side of the plywood, unlike some plywood I have bought in the past. The top and bottom plys were thick enough allowing sufficient sanding without fear of sanding through the layers.
  2. 4 weeks ago
    Nice cherry veneers
    The cherry veneers on this 1/4" plywood are really pretty, on both sides. One side has straighter, tighter grain than the other (at least on the piece sent to me). The box arrived with the plywood sandwiched in between two sheets of corrugated cardboard, inside a large, rigid box, so the corners and edges were totally intact. The ply between the veneers is not the firmest material, but this shouldn't matter if you're just making through cuts in the plywood. This plywood in 1/4" thickness is ... read more ideal for something like a drawer bottom or the flat panel of a false drawer front. It is definitely not structural or intended for complex joinery projects.
    Seeds Program Review
  3. 4 weeks ago
    Beautiful cherry veneers
    Both sides of the cherry veneers on this 3/4" plywood are really gorgeous. It has 7 plies: 5 thick popular veneers inside (see my photo) and 2 beautiful cherry veneers. The box arrived with the plywood sandwiched in between two sheets of corrugated cardboard, inside a large, rigid box, so the corners were totally intact. The ply between the veneers is not the firmest material, but this shouldn't matter if you're just making through cuts in the plywood. This was strong enough to use for cabinet ... read more boxes for a small dresser, and I got the 1/4" cherry plywood to use for flat panels on false drawer fronts - they were a perfect match.
    Seeds Program Review
  1. 2 months ago
    Highly Recommended
    I ordered 400 tiles and was delivered on a Saturday. The tiles came 100 to a skid and truck had a lift gate..perfect! Tiles are easy to put together with a wood block and a mallet. I used a bandsaw for cutting and a table saw for adding a groove with a dado blade if I had to make a cut then establish a new groove on a shorter piece. The "R" factor is noticeable on cold concrete especially when standing in my garage and in the basement too. Glad I ordered and installed them and I ... read more recommended them for a better subfloor.
  2. 3 weeks ago
    Cozy Basement
    Product was easy to install in my basement living room and entire project was completed in the course of two days. The space is awaiting carpet installation, but the room already feels more temperature controlled! Wish they would sell these insulated panels in store so that I didn't have to pay for the on-site shipping though. I had some extra panels left over and was very pleased to learn that I could return them to my local store for a refund with no questions asked!
  3. 7 months ago
    Dricore R+
    Easy to work with. If you can afford it, best product out there.
  • 2016-05-29
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_24
  • loc_en_US, PRD
  • clientname_HomeDepot, pc_8, tc_8
  • bvseo_sdk, java_sdk, bvseo-2.3.0.0
  • CLOUD, getContent, 172ms
  • SPOTLIGHTS, CATEGORY