Project Panels

Sort By:

Select 2 to 4 Items to Compare

Compare

12 Options Available

  • • Ship to Home
  • • Not Sold in Stores
$6.20 / each
DRIcore 1 in. x 2 ft. x 2 ft. Aspen Insulated Panel

Model # CDINSU875002402

  • • Ship to Home
  • • Not Sold in Stores
  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
$11.25 / each
1/2 in. X 2 ft. X 4 ft. PT CDX

Model # 1500104

  • • In Store Only
  • • Pick Up In Store TODAY Free
$15.08 / each
23/32 in. x 2 ft. x 4 ft. Treated Pine

Model # 1500124

  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free with $45 Order
  • • Ship to Store Free

12 Options Available

  • • Ship to Home
  • • Not Sold in Stores

12 Options Available

  • • Ship to Home
  • • Not Sold in Stores
$4.97 / each
3/8 in. x 2 ft. x 4 ft. Cork Panel

Model # 205651

  • • In Store Only
  • • Pick Up In Store TODAY Free
$4.97 / each
3/8 in. x 2 ft. x 4 ft. Cork Panel

Model # 1506216

  • • In Store Only
  • • Pick Up In Store TODAY Free
$4.97 / each
3/8 in. x 2 ft. x 4 ft. Cork Panel

Model # 205651

  • • In Store Only
  • • Pick Up In Store TODAY Free

12 Options Available

  • • Ship to Home
  • • Not Sold in Stores

Search Feedback

Did you find what you were looking for?

Tell us about your search experience. Your comments will help make our site better.

Thank you! You have successfully submitted feedback for this search.


Average rating for Project Panels
(4.4 / 5)
4,237 Reviews
  1. 1 year ago
    Nice piece of wood
    The 2x4 piece of white oak plywood was very nice. It was a little costly, but when you need something what are you going to do.Of course stores know this.The wood was nicely finished, but had a slight bow in it. Not enough to cause a problem with my project. But thats what happens when you can't pick out your wood in the store.They don't sell white oak anything. Actually I bought several hundreds of dollars of white oak moldings and had them shipped from Ohio because there is no availability ... read more here in South Florida.
  2. 2 years ago
    Great quality plywood at a great price
    I use 1/4" plywood a lot for the bottoms of drawer boxes. This is top notch stuff. No voids, thick veneer and very flat. Unlike the inexpensive plywood, I don't need to line the drawer bottom with other materials. The veneer is suitable enough to be sanded and given a coating of shellac and wax. Highly recommended if the application requires the plywood to show. One face is considerably nicer than the other, but this is not advertised as A-1 grade. This has become my go-to plywood brand. Also ... read more it is sufficiently packaged to avoid any shipping damage.
    Seeds Program Review
  3. 3 months ago
    Good buy
    I'm always a little leery of getting any kind of wood/wood product sight unseen. I was hopeful but expected something a little less than ideal. I was pleasantly surprised at what I got. The panel I got is clear, no flaws or blemishes that I can see. Edges were all fine, no chipping or anything like that. No bows or cups, flat as can be and with straight edges. Came shipped in rather heavy cardboard, sandwiched between two sheets of very stiff and sturdy sheets of cardboard. Haven't come ... read more across any voids or other imperfections in the inner plies. Nice clean product and worth the money, not inexpensive but not at all cheaply done either.
    Seeds Program Review
  1. 2 years ago
    Walnut and Maple Panels Good Value
    I had planned this project last fall it is a Coffee table with a Butcher Block top Salvaged from a larger table that I cut down . It will have the Walnut for the front and back panel, Maple for the Sides and then it will be trimmed in an Oak Molding picture framing all 4 sides. I will then affix the top it is my intention to Epoxy it and set hinges to allow it to open like the Toy Boxes I build. The Panels arrived quickly and were packaged well even though the box contained 3 2 x 4 panels there ... read more was no Damage. The graining was spectacular in both the Maple and Walnut Panels. After trying to Find these through traditional sources I am glad they were offered here. I will remember to reorder again
  2. 3 years ago
    Coffee table top
    My parents gave us their coffee and end tables from the early 90s. They use to keep plants on it and the tops which were made of plywood were pealing. Some simple cuts and a new coat of cherry finish did the trick. Product is good but make sure you use a fine and new saw blade or the top layer of vaneer will chip
  3. 2 years ago
    Excellent purchase
    Just received 3 sheets of 3/4 inch Walnut ply. It is plane sawn and book matched. only two repeats per sheet. Perfect condition, outstanding packaging, and fast delivery. Back side is somewhat stained, but at least half can be used as the 'A' side. No voids in plys. Only one big box store carries it in our area and it would cost me more to pick it up (120 Miles) than shipping. Using it for an entertainment center and the 2X4 are easy to handle. All three sheets show the same coloration and ... read more match. Local lumber company can special order, but agin has no panel saw and the cost is greater. Paul
  1. 2 weeks ago
    A super purchase. Easy and convienient.
    I was really pleased with the way the plywood project panel was packaged. It arrived in perfect condition.
  2. 3 years ago
    Terrific plywood!
    This is a step above the cabinet grade plywood for sure. The veneers are very substantial and look a lot more like a lamination than a solid sheet of ply. I did use fairly large pieces but there were no voids or plugs to be found. Definitely recommended as a more dimensionally stable alternative to solid materials
  3. 3 years ago
    Perfect size for closet shelves
    I needed some closet shelves for my hall closet outside my bathroom. These pieces were the perfect size to cut in half and make them. The fact that its cedar on the outside, it worked even better for me with the closet mostly consisting of linens, towels, sheets, and paper products. I simply love the smell of cedar and it was extra nice that I didn't have to paint the wood, treat it, or do anything to it, and I have that great outdoors natural grain look and smell of cedar without the high cost. ... read more A real money and time saver for those on a budget. The wood seems very strong, so it will probably last a lifetime in there.
  1. 3 years ago
    Unusual Use
    My water cooler once had 1/4 inch plywood around it in the screen slots (where the screen frame goes). Over the years it had disintegrated leaving gaps and holes for bugs to get in. My roommate even put a piece of sheet foam in to close some of the gap. I took a piece of cardboard 2x4 feet, the size of the plywood, to make sure that 2x4 was enough to do the job, and cut it to fit the hole around the cooler. When I got the plywood, I used the cardboard for a template to cut the plywood. I still ... read more have some caulking to do on the seams, but it's better than what was there before.
  2. 3 years ago
    Great Stuff
    Excellent red oak plywood panel...cabinet or furniture grade wood finished on both sides...
  3. 2 years ago
    Very Good Quality Oak
    I ordered these to use as risers for a staircase that I rebuilt over the existing one. They worked perfectly and matched the oak stair treads that I also purchased at HD. I ordered 5 boards and there was not a defect on any of them. The quality was very good and it ended up saving me quite a bit of money by cutting these boards myself (3 risers in each board) vs. buying the risers at $18-20 each. the cost was very reasonable although you do have to pay a special shipping charge. I would highly recommend.
  1. 1 month ago
    Great looking plywood
    All 4 of the sheets had damage, I was able to work around it but still a issue, the grain of 3 1/2" sheets even matched, I am sure they did it purpose, but it a pleasant surprise say the least.
  2. 1 year ago
    Excellent Quality.
    The piece of plywood that I received was very high quality. The sheet was very flat (probably within a 1/16th across the entire surface). The thickness was also very uniform (within one or two thousandths) and the veneer was blister and wrinkle free. All in all, I couldn't have asked for more. One observation, the venner did chip out significantly when cut with a dado stack on the table saw. Just an FYI to anyone planning this operation on this product. A router might have given a smoother edge.
    Seeds Program Review
  3. 2 months ago
    BEATIFUL AND ELOGANT GRAIN PATTERN
    I am very pleased with the elegant grain pattern on both sides of the hickory project panel that I received. Each side has a different look that is common with typical hickory wood grain. There are no imperfections or marks in the veneer of this project panel. I am planning on making a small footlocker style storage box. I am staining this panel with a light coat of weathered gray stain and then polyurethane it with several coats of triple thick poly.
    Seeds Program Review
  1. 3 years ago
    Very high grade plywood
    My husband and I are building our own cabinets and purchased this wood for the side and panels as It is a perfect size to work with. We were extremely impressed with the quality of the wood and after staining and top coating they look absolutely amazing. We were very impressed.
  2. 2 years ago
    Wonderful material
    The quality of the surface was excellent. There are no voids and the face was attractive. Well packed. Above average veneer face, looks like sugar maple with the birds eyes.
  3. 3 weeks ago
    Excellent product
    Delivery was prompt, packing very good, and the panel better than advertized.
  1. 3 months ago
    High Quality Maple Veneer Plywood
    This is a very high quality maple veneer plywood which would be useful in many woodworking projects. I am using this for a sign application, but it could have many uses. As you can see from the picture below, it is a very clear maple veneer which should hold up very well. It is free of any significant blemishes. It was finished with a nice clear coat and it was very smooth. I would highly recommend this maple veneer plywood!
    Seeds Program Review
  2. 2 years ago
    Good quality, straight and flat
    7 plies, thin, prefinished, bookmatched veneer on the good side, unmatched, but good quality veneer on the other side. The veneer is very thin, but the finish is hard and pretty damage resistant. I can't imagine needing or trying to refinish it in my lifetime. I ripped two 3" strips off of the 2' X 4' panel to make a toe kick base for small credenza. I found no voids in the inner plies. I used the remainder to fashion a flip down extension for my outfeed table, and machined two miter slots in ... read more the panel. Again, I found no voids in the inner plies.
    Seeds Program Review
  3. 7 months ago
    Kitchen cabinets
    Been building my kitchen cabinet box frames using this product. The plywood is wonderful to work with and looks great. The prefinish removes a tedious step for DIY projects. They cut clean, but use some painter's tape over the cut line, for extra piece of mind. Kevin, the Columbia rep, has been a great deal of help through my project and I wish to acknowledge that. Shipping is very fast. All in all I am so happy the way my interior cabinets look and saved loads of money in the process.
  1. 2 months ago
    Flat, consistent core, nice veneer
    I have used many of these panels with different species of veneer. ALL of them are good quality with few voids. This mahogany and the walnut are the most beautiful veneers so far. I like the maple too, but since it is so hard, it absorbs finish differently than the walnut or mahogany versions. The walnut and mahogany veneers work well with shellac or oil-based finishes. This mahogany veneer is rotary cut with a straight grained surface that looks almost too good to be true. Highly recommended!
    Seeds Program Review
  2. 2 months ago
    Did what I needed
    Good quality plywood with uniform grain patterns. Furniture grade.
  3. 3 months ago
    Nice piece of ply
    I'm using this for furniture and this is a nice strong piece of mahogany plywood. The finish is super smooth. This product is not sold in stores so you'll need to order it online. My other half thought I was crazy when I received a cardboard box that contained a piece of plywood, but when there are no local suppliers of this type of material, that's what you have to do. This is furniture grade so use a fine toothed saw blade.
    Seeds Program Review
  • 2016-06-24
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_24
  • loc_en_US, PRD
  • clientname_HomeDepot, pc_8, tc_8
  • bvseo_sdk, java_sdk, bvseo-2.3.0.0
  • CLOUD, getContent, 128ms
  • SPOTLIGHTS, CATEGORY