Toilet Parts & Repair

Sort By:

Select 2 to 4 Items to Compare

Compare
  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Ship to Store Free
$3.97 / each
Everbilt 1/4 In. Twister Bolts & Caps

Model # 88883

  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free with $45 Order
  • • Ship to Store Free
$18.24 / each
Sloan 3.5 GPF General Repair Kit

Model # 3301038

  • • Ship to Home Free with $45 Order
  • • Ship to Store Free
$4.64 / each
Everbilt 5/16 in. 2-Bolt Gasket Kit

Model # 10065X

  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free with $45 Order
  • • Ship to Store Free
$7.98 / each
KOHLER Flapper Rialto

Model # GP83064

  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
$21.68 / each
KOHLER Canister Valve Assembly Kit

Model # K-1069722

  • • Ship to Home Free with $45 Order
  • • Ship to Store Free
$2.58 / each
Everbilt Flapper Chain, Hook and Ring

Model # 88073

  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free with $45 Order
  • • Ship to Store Free
  • • In Store Only
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free with $45 Order
  • • Ship to Store Free
  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
$5.98 / each
DANCO HydroCap Sure Seat Wax Ring Cap

Model # HCP110X

  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
$5.38 / each
Everbilt Toilet Tank Lever in Polish Brass

Model # 224115-PB

  • • In Store Only
  • • Pick Up In Store TODAY Free
$1.78 / each
Everbilt Fill Valve Repair Kit for Mansfield

Model # 9DD0088096

  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
$3.42 / each
Everbilt Brass Plated Toilet Seat Bolts

Model # 88653

  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free

Search Feedback

Did you find what you were looking for?

Tell us about your search experience. Your comments will help make our site better.

Thank you! You have successfully submitted feedback for this search.


Average rating for "Toilet Parts & Repair"
(4.1 / 5)
2,556 Reviews
  1. 2 years ago
    Hard to find item!
    The item is not carried by Home depot stores. You have to go to Kolher's website get p/n, make sure you get the right one. Go to the Home depot website an see if it is available for online order and ship to home or pick up at store.
  2. 3 months ago
    Fill Valve by Kohler
    I had my Husband who is not very handy install it. I went with Kohler because of their quality.
  3. 5 months ago
    Kohler Toilet Fill Valve
    The fill valve was easy to install. The total time to remove the old and install the new was less than 30 minutes. The direction sheet actually made sense and referred to the product purchased not some generic one fits all.
  1. 4 years ago
    Great product ...
    Easy to install, no leaks and this is a great store to shop at.
  2. 2 years ago
    Replacement fitted easily and needed only minor adjusting
    I put this in to replace my floating ball type valve. When I first put it in it didn't stop running but after reading the instructions further the little filler hose that goes into the tube has to be cut above the tank water line or it siphons water into the tank.. there is also an adjusting roller on the filler tube line to limit how much goes in the bowl to help save water but after setting it the valve makes noise when filling the tank. I give it 3.5 stars but that wasn't an option
  3. 1 year ago
    Excellent replacement fill valve
    Installation was a breeze. It took longer to drain all the water out of the tank than it did to install this fill valve. The parts are plastic but felt plenty strong for this application. The valve is quiet when filling the tank which is a big improvement over older style fill valves. The only thing I didn't like is that the restrictor on the thin tube was too long for my liking. It was no problem to install and works fine, but on tanks with the fill valve close to the overflow tube is seemed a ... read more little cramped. Overall a great experience and I will buy more of these to replace fill valves throughout the house.
  1. 5 years ago
    Work great if you follow instructions carefully
    I must say I was very skeptical about purchasing this product, but I have no regrets. I have two toilets, I purchased two Korky EasyFix Flush Valve Repair Kits, one of the toilets works great, you must follow the instructions carefully. I cleaned the existing flush valve carefully with steel wool and wiped it dry. I let the silicone dry for an hour to be sure that it dried. The first toilet still leaks, but not near as much as it did before, I will redo it. Like I said be sure to dry the ... read more existing Flush valve carefully and clean it very good with steel wool. Thanks Korky
  2. 2 months ago
    worked
    Tried a couple of other products but this was the only one that held
  3. 1 month ago
    It fixed my problem with constant leaking.
    Easy to install and best of all it stopped the leaking.
  1. 3 years ago
    Great Fit
    This was a replacement part ordered for the Champion 4 toilet and fit like the old one. Not too bad of a job but had to remove the tank from the bottom to install, but knew I had to do this prior to the order. The main thing is that it fixed the problem of ghost flushing.
  2. 3 months ago
    Champio4 Ghost Flush
    The flush valve is really easy to change. Solved the problem with ghost flushes or water leaking from the tank to the bowl. Really only needed the blue gasket to be replaced which had the common problem of a bubble in it. Instructions need to be more specific about the importance of correctly clocking the top cup to stop the leaking.
  3. 6 months ago
    Exact replacement for flush valve assembly of Eljer toilet
    Ordered flush valve assembly for my leaking Eljer toilet. It was delivered within 7 days of ordering it. It's an exact replacement for the OE flush valve assembly. It's made of thick sturdy plastic. Install was a breeze because it came with the wrench needed to remove the assembly from the fill tank. Highly recommend because it's the only option you have for Eljer toilets. Well at least mine.
  1. 3 months ago
    Don't replace the whole fill assembly
    I called Korky and tech support told me that usually only the seal in the cap goes bad. I replaced the cap and the toilet worked perfectly!
  2. 2 years ago
    fill valve is working again
    my TOTO Gmax fill valve started to leak water (produced hissing sound and water was continuously running in the toilet tank) . I disassembled the valve, cleaned the screen, float and cap. However, the problem still remained. I also noticed that the red rubber membrane stated to deteriorate ( the pink residue remains on fingers after touching the membrane). So I purchased the replacement cap by Korky (which I think make it for TOTO in the first place) and installed it in no time. The valve works again.
  3. 2 years ago
    Korky customer service over the top
    First of all, kudos to Korky for not requiring a complete valve replacement. This inexpensive replacement cap can be swapped out whenever the diaphragm wears out. Second of all, insanely great customer service. I had trouble with the replacement cap not fully sealing. A call to Korky resulted in the rep patiently walking me through a procedure to clean out the float housing and flip over the circular rubber pad on the float that contacts the valve (apparently a depression can develop over the ... read more years so it doesn't press down hard enough to fully seal the valve). Problem fixed! Thanks Korky.
  1. 3 years ago
    toilet flushes better than when new
    Am pleased with fill valve and flapper repair kit. Was easy to install and toilet flushes better than when new. I am 74 years old and my daughter thought I did such a good job, she said she will hire me out as a plumber.
  2. 6 years ago
    Easier than I thought
    I've been solving the problem with my toilet the "McGiver" way, and I had used whatever I had handy to keep using the toilet without wasting water. I did it just to use it overnight before getting the parts to replace them, and ended up using my fix up for over 3 months. I finally went to Home Depot this morning, found the parts, followed the instructions to install it, and everything was done in less than 30 minutes. I am not a "handy" person whatsoever, but it was easy enough for me to do it. ... read more Perhaps a "handy person" would've finished it in 10 minutes!
  3. 3 years ago
    installation of the FluidMaster
    toilet in main bathroom room has began to continue to run all the time, so i went to homepot and told the salesperson what was going on with toilet.salesperson promptly recommend the fluidmaster to solve the problem. got home and read the easy to install instructions. it took about 5min to take out old system and about 5min to install the new fluidmaster. the plastic parts was easy to adjust and put in place with just an adjustable wrench.
  1. 3 months ago
    Easy, effective and complete.
    When my old fill valve failed I replaced it with the Performax model due to previously excellent quality and performance. As usual that installation was easy and uneventful requiring no special tools or skills. I would say well within the abilities of anyone that has ever changed a tire on a car. When the job was finished it tested leak free right from the start, adjustments were made quickly and simply and the valve is very quiet in operation.
  2. 3 months ago
    GOOD BUY.
    JUST BOUGHT A HOUSE AND I GOT THIS TO FIX A BROKEN FILL VALVE.THIS THING ALSO SHOWED ME THAT I NEEDED TO REPLACE MY FLUSH VALVE GASKET TO SINCE THE TANK WOULD SLOWLY LEAK DOWN AND KEEP THE TOILET FROM REFILING OVER AND OVER.THIS REALLY SAVED ON MY WATER USAGE. GREAT PRODUCT.
  3. 1 month ago
    easy to install
    This product is easy to install, the price is affordable, very dependable, I would recommend it to everybody
  1. 2 years ago
    The Only One That Works
    This valve is a little pricy but don't even bother looking for something else. This is the only one that works with this American Standard Toilet. Believe me I've wasted plenty of time and money and this one does work. The others will allow water to slowly bypass the stopper and you constantly waste water and hear the tank valve come on. It took less than three min to install.
  2. 5 years ago
    Finally, a repair that worked
    For three years, I had struggled with a leaking American Standard toilet flush valve. It was an older, one-piece model toilet and, after trying several new flappers, I replaced the entire flush valve with the exact same (mostely brass) original design version. It still leaked and I was "out" $70. Last try: a mostly-plastic valve with a slightly different counter balance design costing $17 plus shipping from Home Depot. It fits and works perfectly.
  3. 6 years ago
    perfect fit, easy installation
    I own three American Standard toilets that are twenty or so years old. For the past several years, I have been trying to find replacement flush valves for them as slow leaks had developed over time. All generic units I tried were poor fits. When I found the genuine AS part on line, I was delighted. The part was a snap to install (took less than five minutes for everything) and stopped the slow leaks entirely. Very glad to have found the part at a reasonable price
  • 2016-05-25
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_24
  • loc_en_US, PRD
  • clientname_HomeDepot, pc_8, tc_8
  • bvseo_sdk, java_sdk, bvseo-2.3.0.0
  • CLOUD, getContent, 89ms
  • SPOTLIGHTS, CATEGORY