We're sorry, we found 0 matches for ""

Sort By:
Sorry, there are no products available online or in your local store. Please use our Store Finder to select another local store.
  • Page

Search Feedback

Did you find what you were looking for?

Tell us about your search experience. Your comments will help make our site better.

Thank you! You have successfully submitted feedback for this search.

Average rating for Saws
(4.4 / 5)
2,185 Reviews
  1. 1 month ago
    Great Price, Great Saw
    I purchased this miter saw to replace my Sears Craftsman non-sliding miter saw. I love Craftsman tools for there durability and warranty program but when I came time to replace the Craftsman saw I went with the Ryobi. I remember the nightmare of putting the Craftsman saw together and all of the small parts that needed to be attached and measured. This Ryobi saw came 99 percent together out of the box. Just add the dust bag and two small work support pieces then check that the fence is square to ... read more the blade (already attached) and that the blade is square. That's it. Up and running in less than 30 minutes.
  2. 6 months ago
    Great saw for the price
    I bought this saw over two years ago mines the old blue and yellow. I was hoping for a good product for the price and was not disappointed. I used this saw very heavily over the last two years and it is still running strong. One thing I will say is that you do need to spend the time to square up this saw as it says In The directions but I couldn't be happier I am a homeowner and have done ever hung from hardwood floors to trim with this thing and it has performed great thank you ryobi
  3. 2 months ago
    Decent Saw The Price
    The Ryobi 12 inch compound mitre saw I recently purchased is a pretty decent saw for the price. I would recommend it to anyone who needs a saw like this for home projects or the wood hobbyist. It took a little work to get the saw fence lined up properly with the blade. The slots provided in the fence did not enable enough adjustment to square it up and I had file the slots some to get it square. This was not difficult as the aluminum the fence is made of is soft and files easy. The only ... read more remaining problem I have with it is, as you slide the saw out to the widest cut, it tracks slightly off center and the laser alignment line also moves a bit. I adjusted the fence to split the difference in this offset of the track. It is okay for narrow dimensional wood, but for wider wood it is off a little. So, if you need to cut perfectly, I would suggest a more expensive saw.
  1. 2 years ago
    Great Saw
    I bought this saw when it was on sae with the stand. The saw is fantastic and I have had no problems at all with it over a 2 year period. Cons: Dont trust the laser sight I have tried several times to get it adjusted in and finally gave up. Go old school and put the blade on the mark. The "free" stand also works very well. Makes storing and moving very easy. But,,,, I have already managed to break off both of the handles that tighten the extension wings for both ends. I now have vice grips that ... read more do the same job.These handles are very cheap pot metal and I actually broke one a week after I bought it. I would recommend this item and I use it quite often. Just dont feel bad if you dont get the deal with the stand.
  2. 2 years ago
    warranty is so far useless...
    The miter saw and stand are impressive and function flawlessly wonce dialed in... The problem I have is with the "lifetime survive agreement". After jumping through all the hoops of getting the transaction number, recipient number, purchase date,etc...(a real pain in the but when you buy it online and pay with PayPal). And waiting over 2 weeks for them to "process the information", I get an email that my claim has been denied and I need to send them,in the mail, a long list of items from the UPC ... read more on the box to my original sales receipt. I had several brands in mind when the warenty tipped the scales. I am very happy with both the saw and stand, but the warranty is a joke...
  3. 2 years ago
    Awesome saw
    I was looking for a compound slider and found this deal! Dead on, nice table, but heavy...oh well it came with a FREE $200.00 contractor table and the saw is a 12 inch. Very well built! I recently did my stairs with oak treads and it hit every cut perfectly! I still have my old 12inch to loan out : ) Best deal I have gotten in a long time.
  1. 3 years ago
    The best for our film company
    We have a motion picture and sound company and there are no stores near where our sound stage and sets are. We ordered this saw for building sets and, with the stand, can move quickly through set lot . The crew loves this saw and says the fact that it is light with stand, able to maneuver it inside sets and outside through rough ground makes this a great product. No problems at all and Home Depot stands by their product and more important, by their loyal customers. My congrats to one of the best ... read more companies around. People count with them and that alone should get you to buy from them. We order everything we can through HomeDepot and we are big fans of Makita tools.
  2. 5 years ago
    Accurate, smooth and powerfull
    This saw has a wider range of angles, yet maintains accuracy cut after cut. It is so smooth my grandaughter used it easily (with proper supervision and instruction). The compound cuts come out perfectly every time!
  3. 2 weeks ago
    Haven't used much.
    I haven't had a chance to use the saw much yet but can say the following: Fine tuning the miter, bevel, stops and such took over two hours. It took so long because the manual is so horrible. The rotating table is 0.022 below the table top and probably sags due to the weight of the saw. The lower slide glides really smooth while you can feel the ball bearings when sliding the upper slide, not bad though. Like most saws, dust collection is poor. Fit and finish is very nice and seems to be well ... read more built. So far, I like it. Will try to update this (if I can) after I have used it more and can see how accurate it is.
  1. 11 months ago
    You can't go wrong with this tool!
    I spent a lot of time on the web looking at reviews and comments on this saw and Dewalt's. I also talked to friends with experience in both brands. After all was said and done, I settled on this Bosch. And since Home Depot had it fifty bucks cheaper and free shipping to my home, the decision was much easier. The saw was spot on right out of the box: 45 left and right and 90 cuts were accurate with my architect triangles. The in the box 40T blade makes very smooth cuts. Another item I wish I'd ... read more bought a couple of years ago. It's not as hard to move around as I thought it might be, at 42 pounds, which is about twice the weight of the 10 inch 30 year old Craftsman it replaced. The three different handles make it easy to handle. Just looked down at the review form and I have no cons for this saw. There's always one more thing......it arrived a day earlier than HD had told me!
  2. 2 years ago
    Excellent, CM12 has worked right out of the box. Very happy with performance.
  3. 1 year ago
    Excellent "Just the features you really need" miter saw
    Saw was accurate out of the box. It has a low profile with conveniently located handles that make it easy to carry and transport. It lives up to the expectations one has from a Bosch tool. It has plenty of power and makes very accurate cuts. My only complaint was the blade that came with the saw. The blade was mediocre at best. Many might blame the saw for the quality of the blade, but if you put a good blade on the saw you will be a happy camper.
  1. 3 years ago
    Top of the Line
    This tool is the best of the best. It is so easy to use. My wife got me the led accessory so I can easily line up the blade with my mark every time. The blade it came with isn't that bad, I've been using it for general cutting, but if I was building furniture, I'd be sure to get a higher toothed blade. As for the saw itself, it has performed beautifully. The 0 degree bevel wasn't plumb out of the box, but a good saw manufacturer realizes that these don't stay plumb forever and has instructions ... read more to correctly re-align it. I look forward to many years of use out of this tool.
  2. 5 years ago
    Best saw at any price, hands down
    The saw was perfect out of the box not one adjustment required. Near perfect miters every time, saved me hours over my old 10" slider
  3. 5 years ago
    The saw was perfectly square out of the box, ready to go. I have been a carpenter for over 25 years, and this is the best saw to date!!! All I can say is the saw is top grade and would recommend to anyone. You get what you pay for LOL!!!!
  1. 2 months ago
    Perfect cuts for crown molding
    The set up was very easy. The saw is also easy to adjust. Very pleased with the product
  2. 1 year ago
    great saw
    I bought this for small projects around the house, cuts up to 6 inch wide boards with ease, love the laser guide makes every cut easy and precise, I'm just an amateur carpenter but this saw works well and is easy for anyone to use, would recommend it to anyone
    This review was originally posted to Skiltools.com.
  3. 2 years ago
    Complete package
    This miter saw is perfect for a home workshop saw that has the features needed for home projects. It's lightweight so it would be easy to move around if you need to, but can be bolted down onto your workbench if you want it stablized. It ripped through it's first project with ease, cutting fast and sharp without splintering up the wood, the miter settings are easy to use and it has detentes for common cuts. The blade was easy to control with very little friction allowing for precise control ... read more (useful for a check cut, but typically you're ripping all the way through anyway) The cutting surface has grooves cut into it to keep your work sliding around on the aluminum plate. The laser was pre-calibrated on mine so I didn't have to adjust it, lining up dead center of the cut. I am frequently of the opinion that it's worth buying quality in tools, and I wouldn't classify this as cheap, it's solidly built and I don't suspect it'll be falling apart through any of my moderate-heavy home usage (I couldn't say for work-site level usage). Yet it's priced like a cheaper no-name brand saw.
  1. 4 months ago
    Does everything I wanted very well
    The saw require minor alignment at start up and this was very easy to accomplish, it has held that alignment ever since. It is remarkably easy to set miter angles and its higher sliding fence has saved the day on a couple of occasions.
  2. 3 years ago
    great saw
    this is a great saw. I have not used it that much but when I have used it I can tell it is vary smooth and powerfull. If you want good you have to pay for it......for woodworking this the top of the line saw.......thanks bosch for this quality saw
  3. 2 years ago
    I haven't used the miter saw yet, but its quality seems to be very high
    Great price and service. I look forward to using this miter saw soon.
  1. 1 year ago
    Great saw
    I owned a older ryobi 8" sliding miter and always loved it. That died after many years. Then I bought a junk saw for $100 and that's exactly what it was. Junk! But I didn't need something nice at the time. Bought this one and I am really happy. You can't go wrong for the quality and price. I would by this over dewalt or makita or ridged etc.. The other brands may be just as nice but not for the price point . The stand is nice to ... Nothing fancy just nice
  2. 6 months ago
    Good buy.
    Purchased this saw with stand for home projects. So far, no complaints. Worked perfectly right out of the box. The stand is light weight and folds for easy storage. The saw is easy to operate and the laser site is an added bonus.
  3. 1 year ago
    Excellent tool fpr the price
    This miter saw, along with stand, was exactly what I needed. The sliding aspect allows me to use wider boards without the hassle of cutting from two directions. I'm very pleased. One drawback is the work support mounting brackets, holes for adjustment holes seem to be loose in a couple of spots. HD has came through to replace! Happy with the response.
  • 2016-05-26
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_24
  • loc_en_US, PRD
  • clientname_HomeDepot, pc_8, tc_8
  • bvseo_sdk, java_sdk, bvseo-
  • CLOUD, getContent, 131ms