Saws

Sort By:

Select 2 to 4 Items to Compare

Compare
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
$99.00 / each
RIDGID 15 Amp 7-1/4 in. Circular Saw

Model # R3205

  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
Was  $99.00
$79.00 / each
Save $20.00 (20%)
DEWALT 5.5 Amp Jig Saw Kit

Model # DW317K

  • • Ship to Home
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Ship to Store Free
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Ship to Store Free
  • • Ship to Home Free
  • • Ship to Store Free
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Not Sold in Stores
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
$99.00 / each
Makita 11 Amp Reciprocating Saw

Model # JR3050T

  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
$129.00 / each
Dremel 7.5 Amp 4.5 in. Ultra-Saw Tool Kit

Model # US40-01

  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
Was  $109.00
$99.00 / each
Save $10.00 (9%)
HomeCraft 14 Amp 10 in. Miter Saw with Laser

Model # H26-260L

  • • Ship to Home Free
  • • Ship to Store Free
  • • Ship to Home Free
  • • Ship to Store Free
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Ship to Store Free
Was  $29.97
$24.97 / each
Save $5.00 (17%)
BLACK+DECKER 4.5 Amp Jig Saw

Model # BDEJS300C

  • • Ship to Home Free with $45 Order
  • • Pick Up In Store TODAY Free
  • • Ship to Home Free
  • • Ship to Store Free

Search Feedback

Did you find what you were looking for?

Tell us about your search experience. Your comments will help make our site better.

Thank you! You have successfully submitted feedback for this search.


Average rating for Saws
(4.4 / 5)
2,180 Reviews
  1. 4 months ago
    I don't use any of my corded chop saws any more.
    This is one great saw. I am a professional General Contractor. I build homes, additions, decks, you name it. I took my corded chop saws off the truck. Unless I'm going to be doing some kind of exceptional amount of cutting, this is my go-to saw. I use it almost everyday. Typical DeWalt quality. This is as good as it gets.
  2. 2 months ago
    holds its own !!
    I had my doubt about this saw,the price being on the high end and all. Once I bought this saw ,I put it through the ringer . I ran the saw on 760 square foot of 8inch laminate flooring , 325 linear ft. of base board an quarter round , along with some framing .. With any tool you just have to get comfortable with it , I adapted to this one quickly .... definitely worth the purchase....
  3. 9 months ago
    Solid Mitre saw
    First, this is both a clarification and a review. This product is not the same as the cordless blower and trimmer as Joe Schmoe indicated. Those are 40 Volt units and have either a 4Ah or 6Ah battery, but 40V - not the same batteries This is a 20V saw mounted on a small sliding mitre base. To that it works great and last similarly depending on the particular Ah battery you put on. EG 3Ah runs out before a 5Ah battery. It's a solid, well built, dependable, cordless tool. It's lightweight, great ... read more for smaller 2x4/2x8 projects, has all the right stops, etc. and the ability to work where there is no power is fantastic. You can take extra batteries, or recharge in your truck via a convertor if needed. EASY on the go tool to add to your mix if you're doing finish work, small room projects, etc..
  1. 2 weeks ago
    Great price online
    I got this to replace a 12 year old dewalt miter saw, it was very easy to buy online and the price was great too. All I had to do was open the box and it's ready to use. I would recommend this to any one needing a miter saw
  2. 10 years ago
    Beast, Close to Perfect
    As Mentioned this saw is a beast right out of the box. Accurate, durable, portible (with handle), strong. Adjustments are not difficult and very minor. Only cons with this saw are the motor house location and fence backing. The motor house should be on top like the dual compound models to make sight easier and the back of the fence should be perpendicular to the base instead of slightly cuvred for proper clamping of stops. Also if you are a fine woodworker you will need to purchase a 60 to ... read more 80 tooth blade for perfect mirror smooth cuts (40 tooth carbide blade included is perfect for contractor projects). Side note...Make sure to make a copy of the receipt when mailing in a rebate form. Its been over a month and I've seen no rebate. HATE REBATES!!! Just give us the money off upon purchase! GREAT SAW
  3. 2 years ago
    Best Saw
    This is my second 12" Dewalt Miter. The first one worked it's little butt off for over 12 years of torturous conditions, including 5 home builds, many hardwood floor jobs, crown molding, dozens of fireplace surrounds, in the rain building decks, falling out of the tree house, literally hundreds of jobs, all with minimal blade trueing. Between the two saws, I've enjoyed 15 years of hassle free precision cuts. I wish all things in life were as well thought out as these saws.
  1. 3 years ago
    By far the easiest miter saw to use
    This saw is hands down the most simple to use. no more reaching over to the back of the saw to set the bevel cuts. All levers and buttons are in the front making for faster adjustments.The motor starts out slow and in a few seconds reaches its max speed.This stops any jerky movements that cause problems when cutting a very small piece. my only complaint is it should come with at least a 60 tooth blade. Not a 40.
  2. 3 years ago
    Ready, Set, Cut
    Picked this one up today, the shortest day of the year. With lots of cuts to get in before dark, it was nice to pull this thing out of the box and find that everything is zeroed in and ready ti use. The lasers seemed clise enough, but I don't depend on those for accurate cuts on any of my saws. Besudes being smooth and accurate, I like the soft start, miter/bevels controls at the front, the LED worklight, the work piece clamp, power cord hooks and evrything locks down so it's easily carried. Oh ... read more and it came with my favorite brand if blades, the Diablo. I like it.
  3. 1 year ago
    Easy to learn and use
    I bought this saw with the Ridgid mobile saw stand and they went together perfectly and easily. I wanted this saw for finishing my basement and initially i used it as a chopbox and it was very easy to setup and learn... my wife liked it so much that she wanted to make all of the cuts. The miter and double bevel features are, again, easy to use and well executed. The saw is very stable. As far as demerits, i would say the only issues i have found after making hundreds of cuts was that the back ... read more fences are not perfectly flush and the laser-lines are not perfectly aligned to the blade. But they are easy issues to overcome/predict.
  1. 2 years ago
    Excellent
    Excellent, CM12 has worked right out of the box. Very happy with performance.
  2. 5 months ago
    Excellent saw
    I first purchased the Skil 3821, essentially the "sister" model to this saw. It had a great no-load speed but easily got bogged out when cutting even soft pine with a sharp blade and couldn't make any kind of accurate cut. No way to adjust! So after "three strikes you're out" with the Skil, I shopped around a long, long time trying to decide what I wanted. After a bunch of comparisons, I settled on this saw. Very adjustable in every possibly way contrary to the Skil. This Bosch = Professional / ... read more that Skil = Low-end homeowner use!! This saw is a no-gimmick, quality saw. I am using it along with two of the current Dewalt double bevel "chop" saws. I didn't buy a slide saw because even though they are great they are also heavy, heavy machines. The are also big and hard to fit through doors. The machining on this saw is top notch and far superior to the Skil. The portability is great too. It did take a few minor adjustments to get it lined up perfectly but the manual provides instructions on how to calibrate it. It wasn't bad out of the box but the 45 bevel was slightly off. Just unlock a lock nut and turn a screw. The fence and the 90 degree cut angle was spot on. I did read one complaint on the net about the detents being off. That part is adjustable to and you need to lock the Allen screws for the detent adjustments down after it hits the stop setting. My only complaint is that the safety switch is clunky and you have to use your thumb to slide it over and then press the trigger; now some of the older guys have arthritis in their hands, and they say it's actually painful to do that! Overall I am very happy. It really is a good buy. Read the manual and pick it up in the indicated locations and you'll be good to go. It slices 4x4's like butter (Bosch claims that this saw's predecessor, the 3912, has 3.3 horsepower max, or 2460 watts, and I think this saw has the same amount of power). I have upgraded the blade to a Tenryu 24-tooth blade which doesn't bog this down nearly as much as the stock blade. It does leave rougher cuts, however, with a lot of tear-out, but that's OK, because this saw gets used exclusively for framing.
  3. 2 years ago
    Accurate and a Great Value
    This is not the saw to buy if you're cutting very wide boards or large molding. However, if you're a typical woodworker like myself, this is one of the best values out there. The fence was dead square, and all of the adjustments were accurate right out of the box. The dust collection is much better than most of the competitors (single-bevel non-sliders). The only con I've found is that it could come with a higher quality blade. I've yet to come across a miter saw that includes a decent ... read more blade. If accuracy is more important than features, than this is the saw for you.
  1. 1 week ago
    Good upgrade from my 15 year old circular saw.
    The item is everything that I expected and will value the ease of use.
  2. 2 months ago
    78629
    Its everything that I was looking for and was pleasantly surprised when the stand was more robust than I expected. Overall this buy exceeded my expectations.
  3. 1 month ago
    Makita
    What a great product. Perfect fit for my custom door and cabinet business
  1. 2 months ago
    Worth every penny
    I broke this saw in by redoing my porch it performed perfectly.I could not see myself spending 600 dollars on a saw but 400 was OK by me and it's worth every penny
  2. 4 weeks ago
    Excellent tool that really does the job
    This saw is easy to use, durable and reliable. The only draw back is that I did not realize it did not have the led guide light and when I tried to add it I discovered that this is one of the only models that it cannot be added to. Had I realized that, I would have gone for the same model with the led guide light, it is very useful. Other than that, this is a top of the line tool that does the job.
  3. 1 month ago
    great purchase
    This saw can cut 4x4 fence posts and 2x8s on a 45degree angle. It's a dewalt and the power is awesome. The double bevel and sliding function makes it effective in all types of jobs big or small.
  1. 3 years ago
    The Makita LS1216L Dual Slide Compound Miter Saw is fantastic
    I recently added the Makita LS1216L 12-Inch Dual Sliding Compound Miter Saw to my collection of great tools. Three years ago I bought the LS1016 and I soon stopped using my radial arm saw. A month ago, I decided to sell my radial arm saw and get the LS1216L. With two Dual Sliding Compound Miter Saw's I am extremely efficient. I am a home owner doing a home renovation project including crown molding on built-in cabinets and the door and window trim. With the 2 I can set each Compound Miter Saw to ... read more the cut I need and get the job done at a fraction of the time. The Makita LS1216L and LS1016L are both very easy to use and accurate.
  2. 2 years ago
    Saw worked great after minor alignment adjustments
    My Makita dual slide saw has worked great so far. I've been using it to cross-cut oak for two Morris style chairs I'm building and with it's laser has made the cuts very easy to line up. One of the saw fences was slightly damaged in shipping which I reported to Home Depot and they contacted Makita which provided a new replacement fence part by mail within two weeks. Excellant service by both companies. Overall I'm very happy with this saws power and ability to cut multiple angles quickly. The ... read more only complaint would be with the provided manual which I found to be small and contained way to much material on safety instructions rather then concentrating on saw operation. Great product
  3. 12 months ago
    Nice Saw
    I would definitely order again however in the future I will have heavy orders like this shipped to store rather than my home. Package arrived damaged while I was at work. The saw had obviously been dropped many times by the UPS impact testing department. The box was falling apart and the saw was falling out with the slides unlocked. Other than some minor cosmetic damage and slight adjustment it was however good to go. The adjustment was easy and the laser was dead on. This is apparently a very ... read more robust saw and if the testing it received in shipment is any indicator should last forever since it will never see that kind of abuse again.
  1. 2 months ago
    Good for the price
    I got this miter saw to add to my tool inventory for fast small cuts of 2x2 and 2x4 and 4x4's. Saw feels solid and cuts good but stalled on one cut Laser guide does work but not in sun light It's quieter then some other in its class and enjoyed using to to cut 4x4 posts to redesign a soil and and mulch sifter it's also lite and folds down and easy storage
    Seeds Program Review
  2. 4 months ago
    Hi powered, Hi Quality!
    The 15 Amp 10 in. Compound Miter Saw with Laser Guidance System is everything I expected it to be and more. I have used it to cut 2 x 6 boards with ease and to cut perfectly mitered wood trim baseboard corners. The high speed blade cut through both types of wood with equal ease. The saw came out of the box requiring very little assembly. It was ready to use in 15 minutes.
    Seeds Program Review
  3. 5 months ago
    Killer saw, great performance..
    Assembly was very easy with minor improvements to the manual. Hardwood or softwood, this saw cuts it like butter!
  • 2016-05-24
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_24
  • loc_en_US, PRD
  • clientname_HomeDepot, pc_8, tc_8
  • bvseo_sdk, java_sdk, bvseo-2.3.0.0
  • CLOUD, getContent, 104ms
  • SPOTLIGHTS, CATEGORY