How to Measure for Custom Draperies

1-2 hours

Measure properly to get the right fit for your drapes

Measure for Custom Draperies

Custom draperies give you custom, beautiful fabric right in your window. When you order custom draperies from The Home Depot, we will send you fabric cut exactly as you specify. 

This project guide highlights the measuring process for choosing hardware location, measuring width, measuring length and finding the perfect curtain rod.

WHAT YOU NEED FOR THIS PROJECT

1
Choose a hardware location
Choose hardware location - Measure Custom Draperies

• First, pick the spot where you'd like your drapery to hang. Your drapery length will depend on where you want the drapery rod to be placed.
• For an outside mount, the custom draperies hang over and around the windows. For a stylish appearance that display more of the window when the draperies are open, and make the window seem larger when the drapes are closed, follow the following tips.
• If you have space, place the rod 8 inches over the window
• Have the rod extend 12 inches on each side of the window, 24 inches total.
• For an inside mount, the draperies are hung inside of your window opening. In the case of inside mount, keep the hardware as close to the window frame as possible. Follow the following tips.
• Check your measurements to make sure the draperies fit inside the window opening, as they will not be able to extend past the window.
• Since the fabric starts at the top of your rod, start your measurement from the top of the rod and refer to rod instructions for accurate, full length draperies.

2
Measuring your width
Measuring width - Measure Custom Draperies

• What kind of drapery style do you want for your windows? Whether you want decorative panels at the side of your window or a drapery that completely covers your window will determine how many drapery panels you choose. The fabric you choose for custom draperies will come with the appropriate fullness, simply order the exact width that you want your draperies to cover.
• Side panels are styles of draperies that are not meant to close, and simply hang at the sides of your window for decoration. For side panels, simply measure how much width you want your panels to cover, and order that width. Side panels can also be collapsed to cover less space when desired.
• If you want your draperies to cover the entire window, you will need enough panel width to hang across the full opening.
• Measure the width of your window.
• Add 12 inches to each side, 24 inches total.
• Take the total number (width plus the number you added to each side), and divide that number by how many drapery panels you want in the window.
• Make sure the number of custom drapery panels you order can cover the entire area you want covered (total width divided by panels).
• Example: For a 60-inch window with two drapery panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42-inches wide.

3
Measuring your length
Measuring length - Measure Custom Draperies

Measuring length - Measure Custom Draperies

• Once you know where you want to place your drapery hardware, it's necessary to figure out your Rod to Floor Height:
• Mark the spot where you would like to hang the drapery rod.
• Measure to the lowest place that you would like the fabric to hang (either the floor or the bottom of the window). This number is your Rod to Floor Height.
• You will need Rod to Floor Height measurements to order your draperies, but you still need to wait for your draperies to arrive before hanging your hardware.
• We recommend a variety of styles for custom draperies from The Home Depot, with an illustration for each type on the left in the order listed below:
• Valance style draperies can make a window appear taller, and are recommended for outside mounts. Choose a length from 10-30 inches.
• For a sill style, order for a length that will end 3/8 inches above the window sill. We recommend sill style draperies for outside mounts, or for windows that have sills that extend past the window opening.
• Cafe style draperies are recommended for both inside mount or outside mount, and are most often used in kitchens. For a cafe style, choose a length that will hang 6 inches below the bottom of the window, or 3/8 inches above the window sill. It is best to place the drapery hardware around the middle of the window for this style.
• Apron styles are recommended for outside mounted windows, and should drape about 4-6 inches below your window sill or the bottom of your window.
• For a floor style drapery, the length should stop 3/8 inches above your floor. We recommend this style for any drapery that might be operated frequently, and is most commonly used with outside mount.
• The sweep, brushing or cuff length drapery style is most often used for outside mount windows, and is useful when your room requires exact mounting, such as a ceiling mount that drapes to the floor. For this, we recommend a length that is 1-3 inches longer than your Rod to Floor measurement.
• Pooling or puddling style draperies are used in outside mounts when you want to hide an uneven floor or add some extra style to your look, and is recommended for panels that will not be opened or closed regularly. For this style, add a length of 6-12 inches to your Rod to Floor measurement.

4
Find the perfect curtain rod
Find perfect curtain rod - Measure Custom Draperies

• Next, select a rod from which you will hang your draperies. It's important to note that your rod width will not include finials and brackets.
• As much as 6 inches can be added to each side of your rod due to finials and brackets. View your finial options to find the exact measurement.
• Deductions will be made in order to ensure that your rod and finials are exactly the width you order.
• Your draperies will not extend past your brackets.