category #05 group #580
This electric air compressor makes your job easier and more efficient by supplying extra air power when you need it. Delivering 4.3 CFM, simply plug into the nearest outlet and you are ready to go.
category #05 group #582
Designed for jobs that require more power than standard tools can deliver, this portable air compressor is ideal for light to moderate uses in remote locations. Ideal for both contractors and remodelers this model delivers 13.9 CFM.
category #09 group #919
The Roberts 10-751 Carpet Installation Tool kit contains five key tools needed for carpet installation. The tools come conveniently packed in a plastic tool box. Includes carpet knife, duckbill napping shears, stair tool, star wheel roller, and loop pile cutter.
category #09 group #916
The Roberts 10-410 Economy Adjustable Knee Kicker is engineered with extra heavy aluminum castings and industrial grade steel to provide rugged strength and durability. The kicker features double locking pins to easily adjust the length from 19 In. to 23 In.. The high contour neck is specifically designed for use over stretcher heads and poles. This economical knee kicker provides adequate performance for the DIY'er or infrequent installer.
category #09 group #912
The Roberts 10-254 power-lok Carpet Stretcher is the most advanced power stretcher available. The switch handle locks into 17 different stretch/pattern holding positions. The low profile head with side kicking platform makes it compatible with knee kickers. The 18 In. tail block includes a foam wall protector and wheels for easy repositioning.
category #09 group #918
The ROBERTS Carpet Seaming Iron features an adjustable thermostat and heat shield to provide the ideal heat for hot-melt tape while protecting carpets from high temperatures. The low-profile design distributes heat evenly for thorough melting and easy seaming.
category #09 group #914
Designed for use with 20-gauge, 3/16 in. crown staples, the Roberts 20-Gauge Electric Stapler is ideal for installing carpeting. The stapler can hold up to 85 staples and features a 15 Amp drive solenoid for powerful, reliable operation.
category #05 group #520
Featuring durable magnesium construction with aggressive wear guards and carbide inserts in the nosepiece, the 1-3/4 in. Coil Roofing Nailer is designed to provide long-lasting performance even under extreme job conditions. The nailer weighs only 4.8 lb. yet provides 410 in.-lb. of driving power. This unit includes an easy-loading, single-action canister and a dry-fire lock out to help prevent firing when it runs out of nails.
category #05 group #519
The DEWALT DWFP72155 Finish Nailer is ideal for interior Trim, Baseboards, Cabinetry, Door and Window Casings. True Sight Technology allows for easy nail placement as a result of a smaller nose compared to current DEWALT Nailers. This Nailer is designed with a long life maintenance-free motor to keep from staining the work surface.
category #05 group #517
New Paslode 16 gal. Angled Cordless Lithium-ion Finish Nailer System with long lasting Lithium-ion battery drives up to 6000 nails per charge. Battery Stand-By Position conserves battery power and the new 1-hour rapid charger provides 80% charge in only 30 minutes. Used with the new Fuel Nail Combination Pack, the new trim nailer system provides the reliability, power, and speed expected from a Paslode tool.
category #05 group #528
The DEWALT DW66C-1 Coil Siding Nailer is ideal for siding or fencing applications. This Nailer features a tool-free adjustable exhaust. The DW66C-1 is designed with a durable, lightweight aluminum housing that is light enough for prolonged use but tough enough for the jobsite.
category #05 group #518
The DEWALT DWFP12233 Brad Nailer is ideal for most trim nailing applications. This Nailer drives 18-gauge brad nails from 5/8 in. x 2-1/8 in. L. Long life maintenance-free motor to keep from staining the work surface. True Sight Technology allows for easy nail placement as a result of a smaller nose compared to current DEWALT Nailers and no need to compress the contact trip to actuate the tool.
category #05 group #514
This new Compact framing Nailer fits easily in tight spaces. Drives 3-1/4 in. long framing nails into engineered lumber at 100 psi. Durable and compact this will withstand the rigors of jobsite use.
category #05 group #515
The CF325 7.2-Framing Nailer is designed to load and drive fasteners 2 - 3-1/4 in. in length with gauges of 0.113, 0.120 and 0.131. It is finished in a bright orange for high visibility at cluttered job sites, and it's equipped with a depth-of-drive adjustment that resets on the fly. This nailer comes supplied with a lithium-ion battery that charges in as little as 30 minutes on the included charger. The battery's extended life lets you drive up to 6,000 nails between charges.
category #05 group #526
The Hilti DX 36 powder actuated tool that utilizes fasteners from 5/8" to 2 7/8" long. The Hilti DX 36 was designed to make fastenings with speed and versatility in mind. The versatile tool can make direct fastenings into concrete, masonry or steel. The DX 36 features semi-automatic cartridge advance and piston return, increasing your productivity. The cartridge power regulator allows you to adjust the booster strength to meet the jobsite requirements.
category #05 group #534
The DEWALT DW450S2 pneumatic stapler is designed for construction stapling applications such lathing. The DW450S2 drives up to 2 in. staples and comes with a power adjust feature for different staple lengths and materials. The magazine prevents jamming and is removable for easy jam clearing.
category #05 group #563
The Model 445FS is the professionals' choice for pneumatic tongue and groove floor staplers. The 445FS shoots 15.5-gauge PowerStaples. Available in sizes from 1-1/2 in., 1-3/4 in., 2 in. in length. This pneumatic stapler is equipped with a special safety trigger, is mallet actuated, and works from 70 to 110 psi. The 445 PowerStapler adjusts from 5/8 in. (16 mm) to 3/4 in. (19 mm) using non-marring shims and pads and is the ideal nailer for installing oak, maple, ash, pine and other similar wood species.
category #05 group #572
The POWERNAIL 20-Gauge trigger pull pneumatic flooring stapler, Model 20FS, is designed for use with our 1 in. 20-Gauge PowerStaples. This trigger pull pneumatic stapler is the latest in the POWERNAIL line up, and will allow you to staple 5/16 in. through 1/2 in. engineered tongue and groove flooring. Just snug the 20FS up against the flooring, adjust the face pad to your flooring, press the stapler tightly into the floor, and squeeze the trigger. Your staple will be set at a perfect 45-degrees, safely and quickly.
category #05 group #562
The Model 50P Flex is the professionals' choice for pneumatic tongue and groove floor nailers. The 50P Flex shoots 18-Gauge, L-shaped Powercleats uniquely designed by POWERNAIL to reduce cracking and splitting. Available in sizes from 1-1/4 in., 1-1/2 in., 1-3/4 in. in length. This pneumatic is equipped with a special safety trigger, is mallet actuated and works from 70 to 110 psi. The Flex unit easily adjusts from 3/8 in. (9.5 mm) to 3/4 in. (19 mm) without using shims or pads. It is the perfect nailer for installing vertical and horizontal bamboo, Brazilian teak, cherry and other similar wood species.
category #05 group #564
The Model 445 is the professionals' choice for pneumatic tongue and groove floor nailers. The 445 shoots 16-Gauge L-shaped Powercleats uniquely designed by POWERNAIL to reduce cracking and splitting. Available in sizes from 1-1/2 in., 1-3/4 in., 2 in., in length. This pneumatic is equipped with a special safety trigger, is mallet actuated, and works from 70 to 110 psi. The 445 adjusts from 5/8in. (16 mm) to 3/4 in. (19 mm) using non-marring shims and pads and is the ideal nailer for installing oak, maple, ash, pine and other similar wood species.
category #05 group #565
Whether you are a do-it-yourselfer or a professional, the ratcheting mechanism of the Powernail Model 45R allows you to strike the tool multiple times to set the nail. This feature lets you work in close quarters with less effort and fatigue. Built with a forged and precision machined ratchet system, it can also be used as a single strike nailer. The 45R uses 16 gauge L shaped Powercleats and drives the nail at a perfect 45 degree angle while countersinking the nail.
Fastening equipment rentals can be used for a wide variety of home improvement projects. But no matter what you’re making, repairing, updating or building, The Home Depot Tool Rental Center has the right equipment to help you get the job done. Whether you need to rent a brad nailer for installing crown molding or baseboards, a finishing nailer for bulky wood trim, a framing nailer for the new wing or a roofing nailer to keep things tight and dry indoors, we’ve got your tool rental needs covered. You can also rent welders and welder generators for all your metal fabrication and repair projects. We’ve also got a great selection of compressors you can rent to for an endless source of power, including electric and gas air compressors. When you’ve got a project that you need to nail down quickly, you can count on your local Home Depot store to supply the rental equipment you need.