0718455101127

Model 10112W

Internet #100373153

1/2 in. PVC Slip Sections with Mist Nozzle (5-Pack)

$9.84 /each

Frequently Bought Together

Product Overview

The Orbit 1/2 in. PVC Split Section with Mist Nozzle can be used with 1/2 in. PVC Sched. 40 pipe (not included) to extend a 1/2 in. PVC misting kit up to a maximum of 250 ft. This split section is a slip x slip fitting and provides up to 2 ft. of mist cooling capability.

  • Use with 1/2 in. PVC Sched. 40 pipe (not included) to create a durable mist system that can be extended up to 250 ft.
  • Section is a slip x slip fitting and provides up to 2 ft. of mist cooling capability
  • Durable PVC construction
  • Brass and stainless-steel mist nozzle
  • Requires PVC cement (not included) for water tight operation
  • Note: Product may vary by store.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

10 Questions11 Answers

Customer Questions & Answers

1/2 in. PVC Slip Sections with Mist Nozzle (5-Pack)
1/2 in. PVC Slip Sections with Mist Nozzle (5-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Is the spray nozzle replaceable?

This question is from 1/2 in. PVC Slip Sections with Mist Nozzle (5-Pack)
Asked by
Phoenix
Read all my Q&A
January 10, 2015
Is the brass spray nozzle replaceable so that in hard water environments I can just replace the
nozzle?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
August 10, 2016
Answer: 
Yes they are, but the misting nozzles are actually more expensive than the actual PVC with nozzle attached (at least from what I could find)
http://www.mrdrip.com/600-5-Mist-Nozzle-1000-PSI-BrassStainless-012-Bag-of-5_p_321.html
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 13, 2015
Answer: 
Yes, that is replaceable with part number 10106.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

can you buy just one? not 5 (see previous question).

This question is from 1/2 in. PVC Slip Sections with Mist Nozzle (5-Pack)
Asked by
Jon
August 22, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
San Antonio
Read all my Q&A
Home Improvement Profile: DIYer
May 14, 2015
Answer: 
They sell them 1 / pkg IN THE STORE for $7.99 each ... cheaper to get a pack of 5 & have a few spares, IMO
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

August 23, 2012
Answer: 
The product is not available in a single pack, only in the 5 pack. Thanks for the question!
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
1 answer

do you have misters that spray further than 2ft,

This question is from 1/2 in. PVC Slip Sections with Mist Nozzle (5-Pack)
Asked by
mcdonough,ga
Read all my Q&A
August 13, 2016
I have a 8x16 raised bed garden and would like to run 1/2 pvc down the side andmount these type of nozzles at intervals that would cover the entire section.? thank you
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 15, 2016
Answer: 
sparky, these mist nozzles are the only nozzles we currently offer. If you would like to learn more about mist system configuration, so you can get the maximum mist coverage possible, please feel free to contact our Support team at 1-800-488-6156, and we'll gladly help. Thanks!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Since the length of one system can reach up to 250 ft. Does the mist pressure diminish significantly at the latter nozzles with the pvc 1/2 inch syste

This question is from 1/2 in. PVC Slip Sections with Mist Nozzle (5-Pack)
Asked by
Lincoln County, TN
Read all my Q&A
August 4, 2016
I want to install about 75 ft by adding a "t" section at the beginning of the system making each section supply half the nozzles. Will all nozzles receive the same pressure?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 9, 2016
Answer: 
CJ, technically none of the nozzles will see the exact same pressure, but the loss of pressure from nozzle to nozzle will not be significant enough to cause a noticeable difference in performance. If your water pressure is at least 45 psi at the beginning of the mist line, then you shouldn't encounter issues with your 75-foot system. If you have any additional questions at all, please contact our Read More
CJ, technically none of the nozzles will see the exact same pressure, but the loss of pressure from nozzle to nozzle will not be significant enough to cause a noticeable difference in performance. If your water pressure is at least 45 psi at the beginning of the mist line, then you shouldn't encounter issues with your 75-foot system. If you have any additional questions at all, please contact our Support team at 1-800-488-6156, and we'd be happy to help in any way we can. Thanks! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-24 T14:32:18.205-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100373153, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 123ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.0 out of 5 by 4 reviewers.
Rated 5.0 out of 5.0 by did exactly what was needed Every item worked. Misted exactly how it was supposed to, and can be de-assembled very easy as well. All worked wonderfully. August 10, 2016
Rated 5.0 out of 5.0 by Works for me Instead of buying a misting system. I purchased these and some 1/2 inch PVC pipe. I was able to custom build the system the way I wanted it. I had no issues with the nozzles being clogged or spraying bad. They worked perfectly for me. The only downside is that you are going to have to glue them, and when gluing them be very careful or the glue will plug the nozzle. I have used my mister for a year now without a single problem or cloged nozzle. June 2, 2014
Rated 5.0 out of 5.0 by Used these for years I used these for years around dog kennels and they worked fine. if they started getting clogged took the nozzle out soaked it in vinegar and water then put it back it worked fine. Have used some to make my own misting fan works great just remember to put where the water connects below the motor. When you glue them together remove the nozzle to make sure you don't get glue in it. July 2, 2014
Rated 1.0 out of 5.0 by pricy and don't spray, disappointing. these tips are sold along side the Orbit kit as expansions. they are different in design to the tips in the kit and they all didn't work, they were either clogged or dripped or sprayed a stream which is too much. and since these are PVC and need to be glued, it's alot of work to find that they don't work. July 2, 2013
  • 2016-08-26 T14:11:16.026-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_4, tr_4
  • loc_en_US, sid_100373153, prod, sort_default
1-4 of 4
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 79ms
  • REVIEWS, PRODUCT