Model # 20210

Internet #202277670

Store SKU #977193

null 10-1/2 in. Air-Filled Hand-Truck Tire

10-1/2 in. Air-Filled Hand-Truck Tire

$1997 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Use the Power Care 10-1/2 in. Air-Filled Hand-Truck Tire to replace a damaged tire on your hand truck or dolly. The tire comes with an assortment of bushings and spacers to accommodate hubs and axles of differing sizes.

  • Replaces tires on hand trucks
  • Use on front or rear
  • 10-1/2 in. Dia and 3-1/3 in. W
  • 5/8 in. bearings
  • Supports up to 300 lb.
  • Includes spacers and bushing to accommodate hubs and axles of differing sizes




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

will it fit 3/4 inch axle?

Asked by: Linda
Yes it will fit a 3/4" axle. The package comes complete with 2-3/4" bushings so it will adapt to a 3/4" axle.
Answered by: Norm
Date published: 2016-10-29

does this fit harper truck JEDTK1935P

Asked by: MIKE
Per Harper it does
Answered by: Dan
Date published: 2017-06-05

What holds the tire onto the axle? It doesn't come with an axle hat. HD doesn't carry the item.

Asked by: Mark
On most wheel barrows the axle is secured by cotter pins and washers at both ends. They are a lot easier to remove and replace than a axle hat. If the existing axle doesn't have a hole for a cotter pin it would be dead simple to drill a hole for one.
Answered by: ivycat
Date published: 2017-04-08

where can I find just the retaing ring pictured in the bottom right of the picture?

Asked by: gramps
Thank you for your recent inquiry with The Home Depot. There are several retaining rings on our website. To get this particular on, contact your local Home Depot store as this item is also sold in the store. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Answered by: THDSupport
Date published: 2016-08-26
  • y_2017, m_7, d_19, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_, sid_202277670, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms

Customer Reviews

10-1/2 in. Air-Filled Hand-Truck Tire is rated 4.2 out of 5 by 19.
Rated 5 out of 5 by from Hand Truck Tire We are pleased with the replacement hand truck tire. We had purchased one, but realized we needed to purchase two because of the age of the other one and the change in design. But it was a good choice.
Date published: 2012-03-06
Rated 5 out of 5 by from Now, I am tired. My hand truck tire had a hole on the sidewall of the inner tube. I decided to replace the tire with this 10 1/2" dia. Marathon tire. This tire came complete with several adapters including: spacers, bushings & 5/8" axle cap. As long as you get the wheel diameter measurement correct, don't worry if it will fit on your axle. The hardest part of replacing my old tire was removing the old axle cap from the axle. The axle cap is a piece of flat spring steel that is pressed onto the axle to hold the tire on. The only way I could remove it was by drilling into it with a 3/8" dia bit. The new Marathon tire came with a new axle cap for my 5/8" dia. axle. I slipped off the old tire & slipped on the new tire. I placed the new 5/8" dia. axle cap onto the axle & placed a short section of one inch I.D. pipe over the axle cap & tapped the pipe with a hammer, driving the axle cap onto the axle. This tire comes with a grease fitting. I squeezed grease into the fitting till it came out the side of the axle. I filled the tire with 30 p.s.i. of air as suggested & now the hand truck is back in service. This is a great product!
Date published: 2015-12-02
Rated 1 out of 5 by from Bringing it back The tire was not filled when I bought it. I stopped by a gas station on the way home and filled it up. By the time I got home it was flat. Lesson learned, don't by a tire that's not filled up to begin with
Date published: 2014-09-16
Rated 5 out of 5 by from Good general replacement tire I used this tire as a replacement on a pressure washer. The previous tire had been going flat for years. The pressure washer axle was smaller than the hole in the tire assembly. The instructions said to use the bushings from the old tire in that case. I used a punch to remove the old bushings from the washer tire, removed the ball bearings from the new tire hub, and pressed the old bushings into the hub. Sorted. Now my pressure washer rolls easily again. The old tire was a tubeless and the new one is a tube type. I much prefer the tube type since they are easier to repair. This is a very good general replacement tire.
Date published: 2015-07-25
Rated 4 out of 5 by from Great tire I got this tire to replace one on my hand truck. It was very simple to replace. I pulled the cotter pin, pulled off the old tire, put the new one on, reinstalled the cotter pin and the project was done. I did not have an air compressor, air quage, or air chuck with me and so I don't know if the tire is properly inflated directly from the factory. That would have been nice to know if it had the proper pressure. It also would have been nice if it had come with a spare cotter pin, but I just used the old one. It also came with different adapters if you need them for different axle sizes. Mine didn't need any it was the exact right size. I wish I would have gotten two of these tires and replaced both of the tires. The tread pattern is different than my old tires. The new tires have a much more aggressive tread pattern which is better than my original tires. The tire also comes with a grease port, so I can grease the bearings in the wheel hub as needed.
Date published: 2015-11-21
Rated 5 out of 5 by from Excellent Quick Fix Repair for the Tire on My Hose Reel Cart. Installation for the new (replacement) tire was an easy task. The replacement wheel is of higher quality than the original wheel and tire. The hub was less cumbersome to install. All-in-all a good experience after the original dry-rotted tire 'exploded' while I was inflating it. Fortunately, I did not loose any fingers. Although, a close call. I checked the remaining tires and they are in good shape; however, in the future, I will be sure to immediately replace any that unexpectedly loose air.
Date published: 2015-02-28
Rated 5 out of 5 by from New life for an old dolly I have a really sturdy dolly that is probably 10-12 years old. They don't sell anything as sturdy as the one I had, but both tires were dry rotted and flat from sitting for a couple years. Found these tires and I had the old wheels off and these on in under 5 minutes. The dolly is like new and I am so glad I didn't get rid of it!
Date published: 2015-02-04
Rated 5 out of 5 by from Great dog chew toy! This was a Christmas present for our dog (pit bull mix). He loved it! usually takes a couple of weeks to destroy it but its still going strong.
Date published: 2015-01-27
  • y_2017, m_7, d_18, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_, sid_202277670, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 239ms