Model # 757-103100RL6A

Internet #205377761

Store SKU #866886

null 100 ft. 10/3 SJTW Extension Cord with Lighted Plug

100 ft. 10/3 SJTW Extension Cord with Lighted Plug

$149.00 /each

Frequently Bought Together

Product Overview

This 300-Volt, indoor and outdoor, extension cord can be used in heavy use applications. This extension cord offers flexibility, durability, and a kink free cord when you need it most. It is great for use with saws, shop vacuums, or any power tools requiring 15 Amp or less.

California residents: see   Proposition 65 information




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

what makes this 10/3 cord worth more money than the 12/3 cord when they both handle 15amps and the same watts?

Asked by: Blownsonoma
it sayes the cord is rated fo 15 amps on line but in store its sayes the truth it truly rated for 20 amps to 100 feet in length and its a more costly cord because the copper cable is larger so it can opperate larger equipment like my welder and aircompresor as an example i can run 12 gauge but theirs time that u just need to pull 16 17 amps to do somthing thats were this cord comes in hand
Answered by: millerwelding
Date published: 2017-01-24

What does the "SJTW" stand for ?

Asked by: Danny
SJTW is an industry abbreviation used on wire and cable. S is for service; J for junior (which means hard service instead of extra hard); T is the coating (thermoplastic/vinyl); W is weather approved. It is a hard service, thermoplastic cable rated for 300V and approved for outdoor use.
Answered by: Cerro Electrical
Date published: 2016-09-05

Is this an outdoor extension cord? Is it weather resistant? Can I use this cord outdoors in a subzero, Minnesota winter without damaging it?

Asked by: Northwoods
Thank you for contacting us with your product inquiry. This extension cord is rated for indoor & outdoor use. It's jacket resists moisture, abrasion and performs in temperatures ranging from -58°F to 167°F. Please let us know if you need any other questions answered.
Answered by: Cerro Electrical
Date published: 2016-10-03

Can I replace the male plug. My earth pin has failed after a few abusive individuals stood on it!

I have a hard time throwing this away when it cost so much. I can only find a Leviton 15 A male plug with a 12 GA capacity.
Asked by: GU
Thank you for your question. We do not offer a replacement end that adapts to a 10 gauge extension cord. Please let us know if there is anything else we can help you with!
Answered by: Cerro Electrical
Date published: 2016-10-19

How to Register for lifetime Warranty

I bought this Ridgid Extension Cord it says Full Lifetime Warranty. I know with all Full Lifetime warranty stuff from Ridgid you have to register it online to get it But I can’t get it to come up online to register the extension cord anyone know how this works before the 90 days are up and I can’t get full life time on it?
Asked by: JJ12
Thank you for contacting Cerro with your product inquiry. If you go to, select Support, then Product Registration. I hope that helps!
Answered by: Cerro Electrical
Date published: 2016-08-06

Can it be used on 240 volt sanding machines

Asked by: tim
Depends on the machine's specifications, but in general: NO. This cord is not rated for 240V. Even if you cut the 110V ends off and properly installed 240V connections, the cord's internal insulation isn't designed for 240V. So it hasn't been tested that way - there would be no way to know how much current it could handle safely. Buy a 240V extension cord.
Answered by: Steve83
Date published: 2016-08-16

Where are these cords made

Asked by: Mar
Thank you for contacting Cerro with your product inquiry. These cords are made in the USA.
Answered by: Cerro Electrical
Date published: 2015-12-02

Re current carrying capacity

Your 50 ft 12-3 is rated at 15 amps. Your 50 ft 10-3 is also rated at 15 amps. Maybe that is because the 10-3 can't quite make 20 amps due to its cover or something; i.e., physically the 10 ga wire can certainly carry more current than 12 ga wire but maybe with the covering it can only carry 18 or 19 amps and ratings only come in 5 amp increments? On the surface this appears to be a paradox.......probably a good reason though. Like to hear from an expert.....just for my ongoing education. For my RV (when plugging in at home or a friend's house) I think I'll go for the heavier 10 gage ...... and just lug it around + try not to use it in a coiled-up configuration. Methinks when it comes to copper conductors, mo' is almost always better. :^)
Asked by: Ed
Thank you for contacting RIDGID. For our Extension Cords, please contact a Customer Service representative at 800-254-0362 to help with your questions.
Answered by: RIDGID
Date published: 2016-08-15
  • y_2017, m_2, d_15, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_, sid_205377761, prod, sort_[]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 51ms

Customer Reviews

100 ft. 10/3 SJTW Extension Cord with Lighted Plug is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Sturdy. Right length... Sturdy. Right length
Date published: 2017-02-07
Rated 5 out of 5 by from Built for big boys, and made in USA The Ridgid 100' 10/3 is the extension cord you WANT. Its heavy gauge means less voltage-drop even under high-current loading. And its flexibility (surprisingly similar to a wet noodle) means it won't kink, chafe, or cut as easily as stiffer ones; even at low temperatures. A side-benefit is that it sheds dried mud & cement as if it was greased. The fact that it's made in USA is icing on the cake. I bought it in a bundle with a smaller cord, and the bundle cost less than this cord by itself.
Date published: 2016-08-16
Rated 5 out of 5 by from Best Extension Cord Yet! Nice and thick cord that I can power what I need like that the end lights up so I know power is to it cost a lot for a extension cord but you get what you pay for and it does what I need it to
Date published: 2016-04-24
Rated 5 out of 5 by from Very nice VERY Heavy duty. No line drop powering a 15,000 btu ac unit.
Date published: 2016-05-07
Rated 5 out of 5 by from Welder Runs my Miller 141 without any noticeable decrease in performance.
Date published: 2016-02-07
  • y_2017, m_2, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_205377761, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 82ms