0737223022006

Model # 03white

Internet # 204217201

13/16 in. x 250 ft. White Melamine Edgebanding with Hot Melt Adhesive

$25.32 /each

Frequently Bought Together

Product Overview

Refinishing antiques, adding that special touch, repairing or restoring your furniture has never been easier. Veneer edgings are made from the finest grade materials and backed with high quality adhesive for easy and trouble free installation. Find popular sizes and highest quality for your projects.

California residents: see  Proposition 65 information

  • Designed for desks, tables, dressers, cabinets, antiques, drawers, shelving and doors
  • Applies to wood, particleboard, plywood, and even metal
  • Strong hot melt adhesive makes in home use trouble free
  • Simply use a household iron set to the highest setting (cotton) and run along edging until hot melt is melted
  • Easy to trim and apply with standard in home tools - or try Edgemate hand held edge trimmer and hand iron to apply
  • Matches melamine and real wood panels sold by The Home Depot

Specifications

Dimensions

Actual product thickness (in.) 
Actual product width (in.) 
Assembled Depth (in.) 
1 in 
Assembled Height (in.) 
13 in 
Assembled Width (in.) 
1 in 
Product Depth (in.) 
1 in 
Product Height (in.) 
13 in 
Product Length (ft.) 
250 ft 
Product Width (in.) 
1 in 

Details

Accessory Type 
Edgebanding 
Returnable 
90-Day 
Stainable/Paintable 
No 

Warranty / Certifications

Manufacturer Warranty 
none 

More Products With These Features

Search

Customer Questions & Answers

3 Questions6 Answers

Customer Questions & Answers

13/16 in. x 250 ft. White Melamine Edgebanding with Hot Melt Adhesive
13/16 in. x 250 ft. White Melamine Edgebanding with Hot Melt Adhesive

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

What's the best router bit for trimming this after application. I'm looking or a slight bevel so objects don't catch along the edge.

This question is from 13/16 in. x 250 ft. White Melamine Edgebanding with Hot Melt Adhesive
Asked by
Fremont, CA
Read all my Q&A
July 19, 2014
I haven't done laminating in 20 years, and never with my own equipment, so I'm looking for advice. I'm going to be building a homework/computer desk from a 3/4" sheet of your melamine stock. I want to finish the edge after cutting. This product (13/16" Melamine edgebanding) looks like the correct fit, but I want to trim it to a slight bevel, between 10 and 22.5 degrees, so that sliding things on/off the desktop doesn't catch the edge and peel off the laminate. Is there a recommended bit for this product, or laminates in general?

I'm purchasing the Bosch router with plunge kit from you as well, if that makes a difference.

http://www.homedepot.com/p/Bosch-2-25-HP-Plunge-and-Fixed-Base-Router-Kit-1617EVSPK/100341666?quantity=1
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Bridgeville, CA 95528, USA
Read all my Q&A
Home Improvement Profile: DIYer
October 27, 2015
Answer: 
I don't use a router at all. After trimming I give the edge a very slight bevel by hitting it with a belt sander belt streached over a block of wood. The banding material is so thin that a router bit is kind of overkill.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Bonsall CA
Read all my Q&A
October 22, 2014
Answer: 
It is important to "break" the edge after banding but I'd suggest not using a router because it will expose the particleboard if you do. Instead use a file to just slightly break the sharp edge. Run your finger along the edge you create to make sure there isn't any sharpness left and let it go at that, you won't have any catching as a result
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

August 1, 2014
Answer: 
If you go with the 1/2 in. Chamfer Bit Diablo # DR40101 made by Freud, that will give you a 22.5 degree angle.
http://www.homedepot.com/p/Diablo-1-2-in-Chamfer-Bit-DR40101/204073533
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

will a home iron word on this?

This question is from 13/16 in. x 250 ft. White Melamine Edgebanding with Hot Melt Adhesive
Asked by
Read all my Q&A
June 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Bridgeville, CA
Read all my Q&A
Home Improvement Profile: DIYer
July 3, 2016
Answer: 
That is what I use and it works just fine.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Bridgeville, CA
Read all my Q&A
Home Improvement Profile: DIYer
July 3, 2016
Answer: 
I have used over 500 feet of this stuff on the cabinets for my house and it was all applied with one of my wife's old irons. I would recommend using an iron that won't be used for clothing in the future since once in a while some of the glue gets on the sole plate.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Do I need Iron and trimmer for this?

This question is from 13/16 in. x 250 ft. White Melamine Edgebanding with Hot Melt Adhesive
Asked by
Stamford, CT
Read all my Q&A
October 24, 2015
Do you need an edge banding iron for this? Also I am using a 3/5 in. thick panel. Do I need a trimmer? It's the first time I am trying a shelving Project. Thanks in advance.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Bridgeville, CA 95528, USA
Read all my Q&A
Home Improvement Profile: DIYer
October 27, 2015
Answer: 
Yes. You iron on the oversize banding and then trim it to fit the material.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-07-28 T13:57:01.102-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204217201, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 216ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 5 reviewers.
Rated 5.0 out of 5.0 by 13/16 in. x 250 ft. White Melamine Edgebanding with Hot Melt Adhesive It stuck tightly to the edge of my Melamine board, and that's what I wanted. Its extremely long length was good so I didn't have to keep buying more. April 8, 2015
Rated 5.0 out of 5.0 by Great product Its the only oversized edgebanding I could find, goes on easy and easy to trim, best yet a great price for 250 ft vs 25 ft rolls March 3, 2015
Rated 4.0 out of 5.0 by Good value and quality Used the tape to edge finish 27 cabinet doors. My initial concern about the glue coverage turned out to be unwarranted. No kinks, no splices, and consistent width. Be sure to file the edges before you set the tape and it will reduce any "telegraphing" of large particleboard pieces under the tape. Will purchase again when needed. October 22, 2014
Rated 4.0 out of 5.0 by Good product for finishing melamine This BIG role is definitely needed if you are doing more than one cabinet or project. The glue is more substantial than on the smaller rolls. Be aware that it may come spliced, not a continuous 250' roll but I did not find that to be an issue. I don't understand why this product is not available in my local store given the amount of 4x8 sheets of melamine sold. April 16, 2014
Rated 5.0 out of 5.0 by Edge Banding It is nice to get the melamine edge banding so quickly. i am building a set of cabinets for the kitchen and didn't want to be held up waiting for more banding. March 26, 2014
  • 2016-07-28 T13:57:00.812-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_204217201, prod, sort_default
1-5 of 5
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 175ms
  • REVIEWS, PRODUCT