Rated 4.1 out of 5 by 26
Rated 5.0 out of 5.0 by BvilleBound Great motion detection switch for LED and CFL lights -- perfect for closets
This Leviton motion sensing switch work with sensitive LED lights, compact flourescent bulbs and old incandescent bulbs. When I installed an LED light in my wife's clothes closet, I installed another brand -- which malfunctioned. This is not unusual with more sensitive LED light fixtures, which have electronic components. So I replaced it with this Leviton switch which works fine.
Motion sensing switches are perfect for closets: no need to search for an manual switch -- the light comes on automatically when you open the door, and shuts off when the door closes.
This is also helpful if you are remodeling an older home and do not want to snake more wire to add a manual switch on the wall. Just install the motion sensing switch near the light on the ceiling -- where the wire will already be located.
June 16, 2016
Rated 5.0 out of 5.0 by AZHawg Save some electricity!
This switch will not turn on automatically whenever someone enters the room, but it will turn it off automatically. This is especially good when you have someone in your family that constantly forgets to turn off lights when they leave the room. It is versatile in that it can be wired either as a single pole switch or as a 3-way switch. It can control LED/CFL , Incandescent Bulbs, Ballasts, or ceiling fans.
August 25, 2016
Rated 5.0 out of 5.0 by jrb Works great with LED bulbs!
Over the past year with Home Depots assistance, we have been converting our house over to high efficiency LED lighting. The only drawback has been that conventional motion sensing light switches, that save energy by only providing light when there is an actual person in the room, don’t work well with CFL and LED lighting. This switch is the exception! I installed it in our bathroom, and it performs flawlessly with the LED fixtures and bulbs there. Installation was a breeze, just be certain to hook the neutral up correctly in order for the switch to work correctly
January 6, 2016
Rated 5.0 out of 5.0 by DIYer88 Solid motion sensor
This is a good motion sensor control from Leviton. I replaced a single pole, standard Decora type switch in the half bath room. Install was straight forward and took about 10 minutes. The control has adjustments for sensitivity and and shut-off time which are accessed under the face plate. Note this control is manual on and auto off. So you'll have to hit the switch when you enter the room but it will turn off automatically when no motion is detected. I have it connected to a light over the sink that has CFL bulbs installed and don't have any issues. It works great and now no more yelling at the kids to turn off the light.
September 27, 2015
Rated 5.0 out of 5.0 by snowbabe Well Designed Product
15 Amp 180-Degree Incandescent CFL-LED Vacancy Motion Detector White: this is a great product. I have a household of kids and teenagers and the basement lights are always being left on. Plus, some of the light switches are in inconvenient locations from the walking flow path. This sensor has a 180 degree view and yes it really is 180 degrees. The light switch is near the rear door and the moment I start to walk in the room it turns on. Installation is easy. I removed the old switch and put this switch in its place. However, this device has to have a ground wire to work. I imagine they are using that to get a micro current to power the electronics, but I don’t know for sure. My home is older so I had to add a ground wire. Lucky for me I have removable ceiling tiles and it wasn’t too hard. It is something to consider if you have an older home. It is easy to set the sensitivity of the switch. Just remove the front comer (be careful here) and there are adjustments as shown in the picture. They are light level and timer. I think this is a great product. It was easy to install and does a great job.
February 24, 2016
Rated 3.0 out of 5.0 by Jarett Manual on - Sensor Off
Just a warning - this is a manual on and an auto shut off switch. I thought it was an auto on and off switch. This caused confusion when installing and testing. It does say it on the packaging which i didn't see so some is my fault.This online description doesn't say it. It was an easy standard install. If your wiring does not look like the instructions i would stop and call or hire an electrician. My install needed a line (hot) wire - a ground wire - a load wire - and a neutral wire. So pretty basic. You can also use this on a 3 way switch. Comes with 3 face plates (as pictured). I think they are white - ivory - and almond. Great for place where you often to forget to shut off lights. I id this in my attic cause my wife forgets to shut it off all the time.
December 18, 2015
Rated 5.0 out of 5.0 by ELKGROVE64 Well.
Well this item was harder to find them expected. Had to go to three diff Home Depots to find it but did n Wks awesome.
July 5, 2016
Rated 4.0 out of 5.0 by MartinE Energy Savings - Incandescent-CFL-LED Vacancy Motion Detector
LED Vacancy motion sensor light switch is very simple to install into the outlet. (PIR) sensor technology can detect motion from a heat-emitting source within its field-of-view to automatically switch lights OFF when no one is in the room. It has a LED Nightlight that shows location of light switch and consumes less than 1/2 W when room lights are off. You can adjust the sensor from 30 seconds to 30 minutes and then the lights turn OFF automatically thus saving you money on your electric bill.
October 9, 2015