0099137600665

Model 13513

Internet #202092961

Store SKU #603546

2-1/2 in. x 8 ft. Corrugated Utility Gauge Galvanized Steel Roof Panel

  • Can be used in a variety of applications
  • Ideal for protection against wind, heat, humidity, & water
  • Made from durable galvanized steel

Frequently Bought Together

Product Overview

The 8 ft. Galvanized Steel Corrugated Roof Panel is an inexpensive option used in a variety of applications on residential, agricultural and industrial buildings. The corrugated panels are generally used on commercial buildings and commonly used on roofs for barns and sheds. These panels are becoming more modern not only for exterior but as well as the interior of homes. These panels can be used for privacy fencing, covered patios, car ports, decor, back splash , slope ceilings as well as and mainly roofing.

  • Galvanized steel gives added durability and can not be easily dented
  • Can be installed over existing shingles eliminating tear off and disposal cost
  • They are ideal for extreme wind, reflects heat, humidity, and sheds water
  • Ul 2218 impact resistance class 4
  • Can be produced in customer requested lengths and comes in a variety of colors
  • Some varities can be used for siding
  • Note: Product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

46 Questions62 Answers

Customer Questions & Answers

2-1/2 in. x 8 ft. Corrugated Utility Gauge Galvanized Steel Roof Panel
2-1/2 in. x 8 ft. Corrugated Utility Gauge Galvanized Steel Roof Panel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
7 answers

How wide is the sheet? What gauge steel?

This question is from 2-1/2 in. x 8 ft. Corrugated Utility Gauge Galvanized Steel Roof Panel
Asked by
Read all my Q&A
September 30, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
seattle,wa
Read all my Q&A
Home Improvement Profile: Other
April 3, 2016
Answer: 
Although the title states 2 1/2 inches, I believe 25 5/8 inches is the correct width.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Lead Hill, AR
Read all my Q&A
Home Improvement Profile: DIYer
March 12, 2016
Answer: 
The sheets you buy IN the store are 30 gauge and if you are over 150 lbs or so they will dent when walking on them......BUT if you are purchasing a large amount of them (30 or more I would say) you can order them to be cut to your specs in length and you will then get 29 gauge and I am 200 lbs and can walk on them with no problem. Amazing what just one gauge difference can make.
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

Asked by
Jacksonville, FL
Read all my Q&A
Home Improvement Profile: DIYer
January 21, 2016
Answer: 
Utility gauge is 30 - 31 gauge and the panel width is 25 5/8".
Roofing application -21 1/2" coverage, mfr recommends overlap 2 corrugations.
Siding application -24" coverage, mfr recommends 1 corrugation overlap.
Easy to work with very helpful install guidelines available.
+12points
12out of 12found this answer helpful.
Was this helpful?helpful12unhelpful0

Asked by
Great Falls, Montana
Read all my Q&A
Home Improvement Profile: Professional
September 27, 2015
Answer: 
Hello QRice, I have done some further research & have found that the Economy Corrugated UT-Gauge Galvanized Steel Roof Panel to be listed as 30 gauge steel - I have also seen it written up as 29 gauge steel. Hope this helped clear up some questions.
+2points
3out of 4found this answer helpful.
Was this helpful?helpful3unhelpful1

Asked by
Great Falls, Montana
Read all my Q&A
Home Improvement Profile: Professional
May 25, 2015
Answer: 
The width is 25 inches wide. (Standard Width - Geez that's not an answer) As for the guage size I do not know however it is very thin. Good for Siding as another has pointed out but I wouldn't use it for the roofing needs. Hope this clerifies it a bit better for everyone.
0points
10out of 20found this answer helpful.
Was this helpful?helpful10unhelpful10

Asked by
Itasca, Texas
Read all my Q&A
Home Improvement Profile: Other
October 21, 2014
Answer: 
I am not sure of the gauge, but the width is standard.
-67points
0out of 67found this answer helpful.
Was this helpful?helpful0unhelpful67

Asked by
Itasca, Texas
Read all my Q&A
October 21, 2014
Answer: 
Not sure, but it is standard width.
-69points
1out of 71found this answer helpful.
Was this helpful?helpful1unhelpful70
 
4 answers

What gauge is this?

This question is from 2-1/2 in. x 8 ft. Corrugated Utility Gauge Galvanized Steel Roof Panel
Asked by
Sunset Hills, MO
Read all my Q&A
July 4, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Lead Hill, AR
Read all my Q&A
Home Improvement Profile: DIYer
April 27, 2016
Answer: 
The sheets you buy IN the store are 30 gauge and if you are over 150 lbs or so they will dent when walking on them......BUT if you are purchasing a large amount of them (30 or more I would say) you can order them to be cut to your specs in length and you will then get 29 gauge and I am 200 lbs and can walk on them with no problem. Amazing what just one gauge difference can make.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
February 18, 2016
Answer: 
This says Class 4. In speaking with a roofing company, Class 4 is classified as 26 gauge or better.
-1point
1out of 3found this answer helpful.
Was this helpful?helpful1unhelpful2

Asked by
Great Falls, Montana
Read all my Q&A
Home Improvement Profile: Professional
September 27, 2015
Answer: 
Hello Rita & Thank You for a Very Good Question. I did some reading & research and found that the Economy Corrugated UT-Gauge Galvanized Steel Roof Panels are a 30 gauge Sheet. I have also found it to be written up as a 29 gauge too. Hope this helped.
+4points
5out of 6found this answer helpful.
Was this helpful?helpful5unhelpful1

Asked by
Itasca, Texas
Read all my Q&A
October 21, 2014
Answer: 
Not sure, but it was thick enough for our purpose!
-31points
2out of 35found this answer helpful.
Was this helpful?helpful2unhelpful33
 
3 answers

Product too hot to touch for child's playhouse roof?

This question is from 2-1/2 in. x 8 ft. Corrugated Utility Gauge Galvanized Steel Roof Panel
Asked by
Read all my Q&A
June 20, 2016
Building a playhouse and considering this for the roof - would this get too hot for a pre-schooler to touch?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Granbury, TX
Read all my Q&A
Home Improvement Profile: Professional
August 12, 2016
Answer: 
Don't let them climb on the roof due to sharp metal edges!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Lead Hill, AR
Read all my Q&A
Home Improvement Profile: DIYer
June 22, 2016
Answer: 
I don't have children but if I did I would do the roof on your playhouse exactly like I did the roof on my 6 car garage and that is first I put down a particle board sheathing on the roof and then I put down the corrugated galvanized steel roof over that. That way you not only have coolness to the touch on the underside but you also have strength on top to walk on if needed and strength in case of high Read More
I don't have children but if I did I would do the roof on your playhouse exactly like I did the roof on my 6 car garage and that is first I put down a particle board sheathing on the roof and then I put down the corrugated galvanized steel roof over that. That way you not only have coolness to the touch on the underside but you also have strength on top to walk on if needed and strength in case of high winds.
I hope that helps. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: Professional
June 21, 2016
Answer: 
Hello lnjustin, This would be a great roof for a playhouse & yes it would get to hot in sun for pre-schoolers to touch. I would solve this problem by 1st laying a plywood roof that the Utility panel could attach too. I included a link for what I had used when building my nieces playhouse. Hope this Helped.
Link: Read More
Hello lnjustin, This would be a great roof for a playhouse & yes it would get to hot in sun for pre-schoolers to touch. I would solve this problem by 1st laying a plywood roof that the Utility panel could attach too. I included a link for what I had used when building my nieces playhouse. Hope this Helped.
Link: http://www.homedepot.com/p/Utility-Panel-Common-1-8-In-x-4-Ft-x-8-Ft-Actual-0-106-in-x-48-in-x-96-in-833096/100535208 Read Less
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

This says that the panels are 2.5 INCHES wide. Would that be 2.5 FEET?

This question is from 2-1/2 in. x 8 ft. Corrugated Utility Gauge Galvanized Steel Roof Panel
Asked by
Read all my Q&A
February 19, 2015
Telling us that they are standard width tells me nothing. I'm not a roofer, but I can't believe that these are only 2.5 INCHES wide!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Lead Hill, AR
Read all my Q&A
Home Improvement Profile: DIYer
April 26, 2016
Answer: 
They are about 25 inches wide.....I overlapped mine by one ridge or approximately one inch.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Gig Harbor
Read all my Q&A
Home Improvement Profile: Other
June 19, 2015
Answer: 
2.5 inches is the distance measured from one peak to the next. 2.5" is standard.
+11points
12out of 13found this answer helpful.
Was this helpful?helpful12unhelpful1

February 20, 2015
Answer: 
The width is 25 inches wide.
+14points
15out of 16found this answer helpful.
Was this helpful?helpful15unhelpful1
2 3 4 »
  • 2016-08-24 T12:31:21.092-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202092961, prod, sort_default
2 3 4 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 106ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.8 out of 5 by 13 reviewers.
Rated 5.0 out of 5.0 by love it so far! We are replacing a chain link fence with this corrugated utility gauge roof panel. Was easy to cut and was very sturdy when screwed to the wood. I love it so far. April 22, 2016
Rated 5.0 out of 5.0 by Really nice siding I had already ordered 6 of these 8 foot sheets of corrugated galvanized to be delivered and having read some less than favorable reviews, I wanted to thrust my oar in with this review. Usually I go get my own stuff, but I needed more than I could carry so I forked over for home delivery. You take your chances when you do that, but not only was it next day delivery, these sheets are mirror shiny, and not so much as a dog eared corner, or a scratch. I'm using them to overlay the outside walls on my 8x12 wooden shed. They will be just fine, they are easy to cut with metal shears, I believe they will last a lifetime and I recommend them to anyone who needs to redo the wall of a shed, barn, or anything you can think of at home, both inside and out. I'm a bachelor so I could see using these to cover game room walls, garage man caves, and backsplashes. July 27, 2016
Rated 5.0 out of 5.0 by Excellent product and excellent price ........... Just finished an 18 foot X 20 foot barn. I used this product because of my budget. The tin worked great once I learned how to work with it. It's thin......... you will fall through it if not careful. What I did was place two 1 X 10 boards on the tin once I had enough up to rest the boards on. You can then stand on the boards and not damage the tin......... weight distribution. I love the look and ease of working with it, however, you need to understand it is thin tin. Must handle with care. Once it's up, no problem, no leaking. I save over $350 over the next available tin. August 15, 2014
Rated 5.0 out of 5.0 by Very good buy After exploring the cost of this corrugated roofing, Home Depot offered the best price and in store pick up. We were able to complete our chicken coop without a problem! October 21, 2014
Rated 3.0 out of 5.0 by Not sure how to rate it It is light weight. It's light enough that a good pair of scissors will cut it. Some people may think you can read a paper through it, but I'm not sure. Maybe if the print was big and bold? But, I guess it is what it says it is, just not much of it. One good thing about the light weight is that an average man can probably carry 40 sheets or so at once. I would recommend good support underneath - like maybe 3/4" plywood. Good luck. December 17, 2015
Rated 4.0 out of 5.0 by Decent product These panels are pretty thin and dent somewhat easily, but the weight and size make them easy to handle and install. Also, theyre a tad overpriced when compared with other more substantial metal roofing. I used them for some shed siding and they went up effortlessly and look great. I might think twice before using them for roofing or for something more substantial, but for quick and easy siding, this did the trick. July 2, 2013
Rated 4.0 out of 5.0 by easyto work with, made a great shed great for dyi projects, easy to cut and handel by your self February 17, 2015
Rated 1.0 out of 5.0 by Thin & Rust installed this on an an existing roof of a shed little over a year ago. it has rusted though and has to be replaced. maybe a good product for something, just not roof material. January 19, 2015
  • 2016-08-20 T11:27:41.868-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_13, tr_13
  • loc_en_US, sid_202092961, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 53ms
  • REVIEWS, PRODUCT