0739236301710

Model 828-2PK

Internet #202313205

Store SKU #728028

Store SO SKU #1000675614

2 in. PVC Shower Drain with Strainer

$8.32 /each

Frequently Bought Together

Product Overview

The Sioux Chief 2 in. PVC Shower Drain with Strainer features a PVC body and lock nut, an elastomer no-caulk gasket and a 19-Gauge stainless-steel strainer. No caulk required. Product width is 4.25 in. Sioux Chief 828 series shower module drain shall be used where necessary in drainage systems.

  • PVC body and lock nut with elastomer no-caulk gasket
  • Shower module drain
  • Not for use with putty
  • 19-Gauge stainless-steel strainer included
  • Snap-in strainer shall meet all applicable load and flow requirements for intended use
  • Designed in accordance with ASME A112.18.2-2005 / CSA B125.2-05
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

5 Questions3 Answers

Customer Questions & Answers

2 in. PVC Shower Drain with Strainer
2 in. PVC Shower Drain with Strainer

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 2 in. PVC Shower Drain with Strainer
 
1 answer

Is it possible to remove the strainer

This question is from 2 in. PVC Shower Drain with Strainer
Asked by
D.C.
Read all my Q&A
February 1, 2016
In order to snake the drain I need to remove the strainer. I don't see how I can do that without damaging the strainer.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Safety Harbor, FL
Read all my Q&A
Home Improvement Profile: DIYer
April 7, 2016
Answer: 
The strainer just pops off with aid of small screw driver. There are two clips that hold it into place on top of the PVC drain housing. I have had that type before and removing it will not damage it unless you pry it off without using some care. Just insert small screwdriver into the top hole of strainer and lift it off. (not rocket science)
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 2 in. PVC Shower Drain with Strainer
 
1 answer

is there a tool for tightening the lock nut?

This question is from 2 in. PVC Shower Drain with Strainer
Asked by
fremont ca
Read all my Q&A
December 15, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Southcentral PA
Read all my Q&A
Home Improvement Profile: DIYer
January 4, 2016
Answer: 
Yes. Be sure to temporarily block the drain with a balled up paper towel or something so that the tool doesn't accidentally fall into the drain. Easier than trying to fish it out of the P trap. And be sure not to cross thread the lock nut which fits precisely within the drain body around the drain pipe. You can use a slip joint plier or a small strap wrench to tighten the outer lock nut over the drain Read More
Yes. Be sure to temporarily block the drain with a balled up paper towel or something so that the tool doesn't accidentally fall into the drain. Easier than trying to fish it out of the P trap. And be sure not to cross thread the lock nut which fits precisely within the drain body around the drain pipe. You can use a slip joint plier or a small strap wrench to tighten the outer lock nut over the drain body from below. No need to over tighten. The outer lock nut is logically not a leak seal but just meant to keep the drain body body flange tight to the floor of the shower. It need not be killer tight, just real snug. Read Less
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0
This question is from 2 in. PVC Shower Drain with Strainer
 
1 answer

where does the plastic and rubber bushing go

This question is from 2 in. PVC Shower Drain with Strainer
Asked by
clarion pa
Read all my Q&A
July 18, 2015
no manual ... where does the plastic and rubber bushing go
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Southcentral PA
Read all my Q&A
Home Improvement Profile: DIYer
January 4, 2016
Answer: 
There are installation instructions on the Sioux Chief website. Google "Sioux Chief 828 installation" for the .pdf. After the drain body has been inserted through the floor of the shower, the rubber bushing and plastic ring go over the threaded part of the drain body between the outer lock nut and the underside of the floor of the shower. The rubber ring contacts the underside of the shower floor and the Read More
There are installation instructions on the Sioux Chief website. Google "Sioux Chief 828 installation" for the .pdf. After the drain body has been inserted through the floor of the shower, the rubber bushing and plastic ring go over the threaded part of the drain body between the outer lock nut and the underside of the floor of the shower. The rubber ring contacts the underside of the shower floor and the plastic ring sits between the rubber ring and the outer lock nut so that the lock nut doesn't distort the rubber ring when tightened. Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
This question is from 2 in. PVC Shower Drain with Strainer
 
0 answers

Can this be used with a 36 x 36 center drain shower pan?

This question is from 2 in. PVC Shower Drain with Strainer
Asked by
Read all my Q&A
May 5, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T11:22:12.977-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202313205, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 62ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 6 reviewers.
Rated 5.0 out of 5.0 by The PVC Shower Drain Strainer is working as it should. Drain Strainer is working with no leaks, working as advertised April 12, 2016
Rated 5.0 out of 5.0 by Good value This is a low cost, well engineered, and nicely finished product. It installed easily and was water tight after the silicone caulk had cured. Installation instructions are on the Sioux Chief website; google "Sioux Chief 828 installation" for the .pdf. Comes with the tool to tighten the compression nut. The drain body does not "install from the top", and installation of the drain body requires access to the underside of the shower floor. If your PVC drain pipe is the prescribed height, the only tools needed are some good clear silicone caulk and a screw driver. If your PVC drain is not the required height, you have some preparatory cutting to do. The installations instructions say to run a "bead" of silicone caulk around the underside of the drain body flange. I don't know how much a "bead" is but would apply the silicone generously since it is the cured silicone and not the rubber sealing washer that is the true seal against leaks from under the drain body flange. The excess silicone that squishes out from under the flange as the drain body locking nut is tightened is easily cleaned up. The compression nut fits precisely over the PVC drain and within the drain body. Make sure that it's properly located and that you're not cross threading when tightening it down. It should start easily. The other good tip that I read was to temporarily block the drain with a crumpled paper towel before putting on the compression nut so that the compression nut tightening tool doesn't errantly fall into the P trap. January 4, 2016
Rated 5.0 out of 5.0 by Good Product This product worked perfectly for us. Easy to install December 15, 2015
Rated 4.0 out of 5.0 by Easy Shower drain to install We needed a shower drain that was able to be installed from the top once the shower pan was in place and this worked out well! Simply place some silicone under the drain rim and feed it though the hole. The screw the gaskets up from the bottom. Once the pan is in place the gaskets get tightened onto the pipe with a plastic o ring and you are done. Instructions were hard to read on the product but if you go there website they have great instructions! September 12, 2013
Rated 5.0 out of 5.0 by Easy install drain I had called a plumber to replace my shower drain but after looking at it myself I took the old drain apart and replaced it myself in about 30 minutes. With the plumbers putty my cost was $10.63. March 5, 2014
Rated 1.0 out of 5.0 by the plastic drain leaks if the shower floor is not solid the driain leaked at day one. a professional plumber did the install, he came back six times over six months. it still leaks. i replaced it with a brass drain and reinforced the shower floor. no more leaks September 6, 2013
  • 2016-09-08 T11:32:00.541-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_6, tr_6
  • loc_en_US, sid_202313205, prod, sort_default
1-6 of 6
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 61ms
  • REVIEWS, PRODUCT