Model # 4DPK24X24X24

Internet #100144526

Store SKU #430320

Store SO SKU #1000683830

null 24 in. x 24 in. x 24 in. Duct Board Plenum Kit - R6.0
0050206963241

24 in. x 24 in. x 24 in. Duct Board Plenum Kit - R6.0

  • R-6.0 Duct Board Plenum
  • 4 sides and top included in kit
  • handler
$45.98 /each

Frequently Bought Together

Product Overview

This Master Flow 24 in. x 24 in. x 24 in. Duct Board Plenum Kit - R6.0 lets you easily create an air mixing chamber for your furnace before your ventilation system accepts it. The duct board reduces ventilation system noise and reduces condensation for improved performance. Its high 6.0 R-value provides thermal efficiency. Kit includes 4 sides and top. Open bottom to attach to air system.

  • Lets you build an air supply plenum chamber to allow air mixing directly from the furnace before the air is released into your ventilation system
  • Pre-cut design allows easy assembly using compatible foil tape (not included)
  • Insulation lining absorbs and reduces system noise and reduces condensation for improved ventilation system performance
  • R-value of 6.0 delivers optimal thermal efficiency

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Can this product be easily cut to a smaller size?

Asked by: Keppy
yes semi rigid fiberglass. foil on one side, black backer on inside
Answered by: b1burner
Date published: 2016-10-19

Can these be easily connected to create a 24"x48" plenum?

I am thinking about using this to create a plenum for a 5000 cfm swamp cooler that I will duct to each room. I'm thinking a 24"x24" by itself may be a bit small for that volume of air so I had planned to go bigger anyway if putting them together will work. That may solve the "not enough sides" problem mentioned in other reviews since I'm using two to make one anyway.
Asked by: Dave
yes
Answered by: b1burner
Date published: 2016-02-22

Are the joints on this shiplap or v-groove? is there material left for a staple flap?

Are the joints on this shiplap or v-groove? is there material left for a staple flap?
Asked by: BB632

Can this be used to replace old insulation material? How do you glue it?

I already have sheet metal plenum box and I just want to replace old insulation material inside that has been falling apart now.. Can this be used for that purpose? How could I glue this to sides of sheet metal plenum box?
Asked by: luka
  • y_2017, m_3, d_26, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_100144526, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 20ms
  • QUESTIONS, PRODUCT

Customer Reviews

24 in. x 24 in. x 24 in. Duct Board Plenum Kit - R6.0 is rated 3.5 out of 5 by 17.
Rated 5 out of 5 by from All sides needed were sent!! Not like Lowe's This really is a box (less one side'! Lowe's only sent two pieces! So you had to but 2 items to get a box). Thanks HOME DEPOT for not playing games!!
Date published: 2016-11-08
Rated 1 out of 5 by from This product is over priced. Generic product. Wide application. Labor intensive to modify for sp... This product is over priced. Generic product. Wide application. Labor intensive to modify for specific applications.
Date published: 2017-03-22
Rated 1 out of 5 by from Wrong parts Received 2 of same sides and wrong end had to recut to make work . Was factory sealed should have returned.
Date published: 2017-03-03
Rated 4 out of 5 by from In the past , I had not so good experience... In the past , I had not so good experience , but today was good.
Date published: 2017-02-08
Rated 5 out of 5 by from Exactly what I needed! I opted to tackle the job of replacing my entire duct system myself when the estimate to have pro's do it was in excess of $3000 - and moving up to $4800 after April 1st because of the heat in FL. The junction box that served the far side of my house had obviously been used as a seat by someone and was completely crushed and had a gash in the top, so I had to construct a new junction box, and this was just what I needed. The instructions on the packaging were clear and easy, and the materials were of good quality, and cut easily with a box cutter and a duct knife. To make a complete box with a top and a bottom, you will need 2 kits, as the kit only comes with one panel for top or bottom.
Date published: 2015-04-15
Rated 5 out of 5 by from nicely engineered building and installing the plenum and ductwork in a 100 year old house couldn't have been easier. The plenum is in pieces that fit perfectly together. needed to adjust the size to fit between floor joists and it cut smooth as silk with a utility knife. much sturdier than I expected, a pleasant surprise! seal it well with foil tape (I used three layers because I had extra tape). cuts easily with a hole saw or jig saw - and I used both. it might have been nice to have assembly instructions but I had it figured out in two shakes - and it made perfect sense once I understood the way it was fasioned to fit. very light weight and easy to position.
Date published: 2012-03-06
Rated 4 out of 5 by from Great product, only comes with 5 sides... This duct board plenum kit worked perfectly for my application. I purchased 3, because I had to get the extra sides to build 2 complete boxes, which is my biggest complaint. the only way I knew it was not a complete box was because another reviewer mentioned the same thing. I used 1 box as a supply sub-plenum, 25 ft away from the main furnace supply plenum. 14" flex run in, (3) - 8" flexes out, split to (6) 6" register connections. I used the other box as a return sub-plenum, 35 ft away from the main furnace return plenum. 14" flex run to the box, branching to (4) 8" flexes to return runs in stud cavities. The boxes were easy to assemble once I figured out how to do it, although it takes a while to build them. Comes in 3 "pieces", which make up 5 sides. 2 of the pieces are ready to fold into a half square, with 2 corner seems to tape completing the square. The 3rd piece is an end, with all 4 edges to tape. Fabricating a 6th side from the 3rd plenum kit was easy, just took a side with 3 "beveled" edges, and added a 4th bevel edge using a utility knife. Cutting material is very easy and clean. Used a utility knife with a sharp blade, cuts through like butter. In order to cut completely through the thick material, I used a sharp lock blade knife to finish the cuts. Minimal mess, easy to cut clean holes, no "sawing" required. I would choose to work with this material over sheet metal any day. One more thing. Material is itchy hard fiberglass. Use gloves, try not to get it on your skin.
Date published: 2013-12-16
Rated 5 out of 5 by from Great product Had one plenum but wanted to add extra ducts. I cut the top of the existing one and put this on top. Secured the two with a lot of aluminum tape. Seems very secure. Size is now 20" x 21" x 48". Very happy
Date published: 2016-09-07
  • y_2017, m_3, d_26, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_, sid_100144526, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 25ms
  • REVIEWS, PRODUCT