0077985000936

Model 42SA

Internet #100081687

Store SKU #170979

26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor

$11.47 /each

Frequently Bought Together

Product Overview

This professional grade Rain Bird 42SA+ rotor sprinkler features superior durability plus exceptional watering uniformity of patented Rain Curtain nozzle technology, resulting in a greener and more even lawn with reduced watering time. The rotor distributes larger water droplets that cover evenly throughout the pattern, also reducing wind-blown overspray. Nozzle micro ramps direct a portion of the spray near the head, adding gentle close-in coverage with reduced watering velocity that won't wash out new seed. Simple top adjustments for arc and distance help you keep water on the grass, not spraying on the house, sidewalk or driveway. The rotor also features a rugged dual-action, positive stop wiper seal that protects internals from debris and, together with a heavy duty stainless steel spring, assures positive retraction for leak-free performance. It installs on a standard 3/4 in. riser for simple replacement of older rotors.

  • Improve coverage consistency and reduce cycle times with this rotor's Rain Curtain nozzle technology that distributes water more evenly throughout the pattern
  • More effective close-in coverage solves problems with dry spots around the heads of your rotor zone
  • Water lubricated, gear driven design is quiet and trouble-free
  • Self-flushing at pop-down to clear debris and maintain spray efficiency
  • Nozzle is easy to remove for replacement and maintenance
  • 40 Degree - 360 Degree arc as well as reversing full circle rotation
  • 4 in. pop-up clears taller grass
  • 1/2 in. female threaded bottom inlet
  • Operating pressure: 25 - 65 psi
  • Flow rate: 2.3 to 3.8 gpm

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions12 Answers

Customer Questions & Answers

26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
 
4 answers

Is there a way to adjust the "fixed left edge" ?

This question is from 26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
Asked by
Read all my Q&A
August 4, 2015
This is installed right in front of a fence between us and the neighboring yard. No matter how I try to adjust the arc it sprays against the fence or seems to always do 360 .. I would like it to be 180 on our side of the property of course. It seems the left edge points in the wrong direction when the full rotor is screwed in. Thanks.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
NW Florida
Read all my Q&A
August 2, 2016
Answer: 
With the nozzle set to the left edge, rotate the whole sprinkler so the nozzle points to the far left point of the watering area. You can make minor adjustments by just turning the hole sprinkler itself. There's no need to tighten the sprinkler as tight as it will go. If you're concerned about leakage, which I haven't experienced, use a little plumper's tape on the male connection.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Choctaw, OK
Read all my Q&A
Home Improvement Profile: DIYer
September 16, 2015
Answer: 
I just talked to the Rainbird customer service people. If I rotated the entire sprinkler so that the left edge was where I wanted it, it unscrewed it enough that it leaked at the bottom. They said the trick to setting the left edge is this:
If you look at the top of the sprinkler, there is a little black rubber cap, with the plus and minus signs on it. Below that you have a black ring with two little Read More
I just talked to the Rainbird customer service people. If I rotated the entire sprinkler so that the left edge was where I wanted it, it unscrewed it enough that it leaked at the bottom. They said the trick to setting the left edge is this:
If you look at the top of the sprinkler, there is a little black rubber cap, with the plus and minus signs on it. Below that you have a black ring with two little tabs. Below that you have a white seal.
You probably already know that the water comes out of the little spout at the top. In other words, if you were reading the words RainBird, the spout is at the top. That spout is what needs to point to the left edge.
With the sprinkler NOT running, grasp the little rubber cap on top of the sprinkler and rotate it all the way to the right (this does something to disengage the gears inside), then all the way to the left, which is where the fixed left edge is. While the sprinkler is rotated all the way left, turn the little black ring so that the black ring and the rubber cap together move to where you want the left edge to be. The customer service rep said to mash down on the cap to get it to move. That didn't work for me, but I found I could use the little black tabs on the ring to help make it move.
I haven't tried it yet on an installed sprinkler yet, but I did try it on one I have in my hand and it looks like it should work. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Franklin, MI
Read all my Q&A
Home Improvement Profile: DIYer
September 1, 2015
Answer: 
Yes, adjust the entire assembly to get the left edge where you want it, then use the adjusters to get the coverage you want. You don't have to screw the rotor all the way down on the riser pipe, so just unscrew it a little if you need to, to get the left edge correct.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Hawaii
Read all my Q&A
August 16, 2015
Answer: 
On my rainbird replacement heads instructions say to use the palm" of you hand on the sprinkler head to turn left until it won't turn any more, then adjust the amount it rotates with the screw. Might be hard to palm with yours since already installed. May need to hold extended with left hand in order to palm top with right? Good luck.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from 26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
 
4 answers

Can I replace my Hunter rotary sprinklers with these, Is the threading the same

This question is from 26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
Asked by
Scranton, Pa
Read all my Q&A
June 24, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
NW Florida
Read all my Q&A
August 2, 2016
Answer: 
they have a 3/4 inch female connection. Any standard 3/4 inch PVC male connection will work.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
December 8, 2015
Answer: 
I replaced an old sprinkler head with this one and simply threaded right onto the plastic pipe nipple and it was just fine.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Franklin, MI
Read all my Q&A
Home Improvement Profile: DIYer
September 1, 2015
Answer: 
Most likely. There are a couple different size riser pipes, but I have swapped Toro, Rainbird and Hunter without problems.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
St. Petersburg, Florida
Read all my Q&A
July 1, 2015
Answer: 
Yes, the threading (3/4" UNC) is the same for both units.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
 
2 answers

Does this rotor come with a standard noozle installed or do you need to buy noozle sets?

This question is from 26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
Asked by
Beverly Hills Florida
Read all my Q&A
December 5, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
NW Florida
Read all my Q&A
August 2, 2016
Answer: 
Comes with a standard nozzle that works well and also is adjustable
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
December 8, 2015
Answer: 
Mine has a standard nozzle that is adjustable
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
 
1 answer

How to fix once it breaks while adjusting

This question is from 26 - 38 ft. 42SA+ Simple Adjust Pop-Up Heavy-Duty Gear Drive Rotor
Asked by
Lenexa, KS
Read all my Q&A
May 30, 2016
I've had two of these now that "broke" while being adjusted. It suddenly goes from the long spray to a very short stream of water when twisting the front adjustment screw. Once this occurs, no amount of adjustment fixes it. Please note that this is my first sprinkler system so it's very possible I'm doing something wrong.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
RANCHO CUCAMONGA, CA
Read all my Q&A
Home Improvement Profile: DIYer
June 2, 2016
Answer: 
MY EXPERIENCE WITH THIS SPRINKLER HEAD IS THAT YOU MUST MAKE THE ADJUSTMENTS WITH NO PRESSURE ON THEM. WHEN I INSTALL THEM, FIRST I FLUSH THE LINES AND THEN INSTALL THE HEADS. THEN I TURN THE SUPPLY WATER ON AND SEE WHERE EACH HEAD IS ADJUSTED. THEN I TURN THE WATER OFF AND MAKE A GUESSTIMATE ON HOW FAR TO ADJUST THEM AND THEN TURN THE WATER BACK ON AND IF ADDITIONAL ADJUSTMENT IS STILL REQUIRED I FOLLOW Read More
MY EXPERIENCE WITH THIS SPRINKLER HEAD IS THAT YOU MUST MAKE THE ADJUSTMENTS WITH NO PRESSURE ON THEM. WHEN I INSTALL THEM, FIRST I FLUSH THE LINES AND THEN INSTALL THE HEADS. THEN I TURN THE SUPPLY WATER ON AND SEE WHERE EACH HEAD IS ADJUSTED. THEN I TURN THE WATER OFF AND MAKE A GUESSTIMATE ON HOW FAR TO ADJUST THEM AND THEN TURN THE WATER BACK ON AND IF ADDITIONAL ADJUSTMENT IS STILL REQUIRED I FOLLOW THE PREVIOUS STEPS TILL ADJUSTED. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T13:23:52.440-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100081687, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 41ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.4 out of 5 by 49 reviewers.
Rated 5.0 out of 5.0 by Rain Bird sprinkler Had an older Orbit seize up and replaced with this. Easy to adjust and throws down a good even pattern on the lawn. May switch all of them out as the go bad. August 9, 2016
Rated 5.0 out of 5.0 by Been using them for years and love them Easy to install and adjust; and the reliability is great. been using them for years. August 2, 2016
Rated 5.0 out of 5.0 by Perfect replacement for my broken one. Sprinkler fit and worked perfectly. Had no problems installing and adjusting it the sprinkle.r was a perfect fit for the one it replaced. July 26, 2016
Rated 5.0 out of 5.0 by Great as Replacements Just moved into a house with an older Rainbird system and needed to replace some R-50 turfbird heads. After researching on Rainbird's website, it listed the turfbird to be discontinued and replace with this model. Very simple to install- dug up the old sprinkler heads, installed these new ones, and adjusted spray. I will slowly be replacing all of my Turfbird heads with this model! June 27, 2016
Rated 5.0 out of 5.0 by Example: Best Purchase Ever... The adjustable pop up was very easy to install and adjust May 21, 2016
Rated 1.0 out of 5.0 by NOT a Good buy ! Gear system wouldn't work and I returned it and bought an Orbit which works Great ! May 17, 2016
Rated 4.0 out of 5.0 by Works fine I used to use different brands of sprinkler heads but decided to standardize with just one brand. I picked Rainbird because they seem to be the most reliable. April 26, 2016
Rated 5.0 out of 5.0 by Easy swap Easy to swap out and set up even with small radius to sweep. April 12, 2016
  • 2016-09-08 T15:06:31.173-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_49, tr_49
  • loc_en_US, sid_100081687, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 47ms
  • REVIEWS, PRODUCT