Model # UC606LFA

Internet #202270603

Store SKU #273365

Store SO SKU #1000311490

null 3/4 in. Brass PEX Barb x Female Copper Sweat Adapter

3/4 in. Brass PEX Barb x Female Copper Sweat Adapter

$2.78 /each

Frequently Bought Together

Product Overview

The SharkBite 3/4 in. Brass Barb x Sweat Female Sweat Adapter is ideal for your next plumbing project. The adapter can be used with PEX tubing (not included) and is corrosion resistant.

California residents: see   Proposition 65 information

  • Lead free DZR brass construction for durability and reliability
  • Low-cost plumbing connection system
  • Barb connection
  • Compatible with PEX Pipe
  • NSF listed
  • Meets UPC, IPC, and cUPC requirements
  • Fittings work with crimp ring or clamp connection methods
  • Rated to 200°F and 200 psi

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

is this item like a 3/4 inch copper coupling that you solder over the 3/4 copper pipe?

Asked by: CHICO
Answered by: stan
Date published: 2017-01-30

Has the solder issue been resolved?

Many users complain of loose fit and poor solder flow. Sounds like ID of solder cup too large so capillary space too large so capillary force not sufficient to draw in molten solder. Has this been resolved?
Asked by: nick
  • y_2017, m_3, d_27, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202270603, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 63ms

Customer Reviews

3/4 in. Brass PEX Barb x Female Copper Sweat Adapter is rated 2.5 out of 5 by 10.
Rated 5 out of 5 by from I used these a couple weeks ago and had no problems at all... Great product! I'm a DIY person. I used these a couple weeks ago and had no problems at all... Great product! I'm a DIY person.
Date published: 2017-01-30
Rated 1 out of 5 by from Two failed sweats in a row I had the same problem as others - did a job where I had to sweat about 20 connections... this was the only one that leaked. So I cut it out, bought another identical fitting, put it all together, and it leaked again! Cleaned everything, fluxed it, heated it up... solder melted but wouldn't really get sucked into the joint. I came on this website just to see if anyone else had this problem because I thought I was going crazy. Really irritating - I have spent hours on this one stupid connection now. I will not buy sharkbite fittings that have a sweat end again.
Date published: 2016-07-15
Rated 5 out of 5 by from Good fitting -- no problem I have installed a couple of these 3/4 inch adapters recently, and a half dozen of the 1/2 inch size. I had no problem sweating them. I wire brushed both surfaces and used a good flux. Oatey No. 95 petroleum-based tinning flux worked great, but I also had good results with Oatey's H2O-95 water-based tinning flux. The latter is less forgiving and more difficult to use, but eliminates the insoluble sludge inside the pipe and is easier to clean up on the outside. I used Oatey Safe Flo lead free solder. I was able to test all of these sweat assemblies with air before installing in my house. All of them had no detectable air loss, 2 hrs at 100 psi. After installing in my house, I did not have one drop of water leak out either end of these adapters at roughly 60 psi. Great Results! I'm a DIY'er.
Date published: 2016-08-06
Rated 1 out of 5 by from DO NOT BUY THESE!! The only problem with PEX sweat adapters is that they do not sweat adapt. All of my copper to copper joints solder with ease. So do the copper to brass outdoor faucet joints. But try and try and try again and there is no luck with either of the PEX sweat adapters. Use a copper pipe thread adapter instead. I wish I had saved myself the time, money, and frustration. Horrible product...
Date published: 2016-07-30
Rated 1 out of 5 by from Useless!!! I've been in plumbing bussines for over 15 years and never had problems sweating copper but this product just doesn't work with copper! Had to do few of them none would work, all leaked. Who makes this stuff and release it to the market? It's borderline criminal.
Date published: 2016-08-30
Rated 2 out of 5 by from Leaked I have sweat copper for 30 + years. This would not suck solder. Had to go back to HD and mickey mouse fittings to make this work. It was on my main water line. Not sure about the shark bite couplings.
Date published: 2016-06-18
Rated 1 out of 5 by from Difficult to solder Every one of my solder joints failed. The only thing I can think of is that there is oil residue on the fitting from manufacturing. I had to cut out the fitting, use a copper coupling and a female pex adapter so I could save the pex piping. Next time I will try cleaning with acetone. Very disappointing.
Date published: 2015-10-27
Rated 1 out of 5 by from Failed everytime I'm not sure what it is with this fitting, solder wouln't sip in the gap, I use MAP which is very hot but still not working. Don't buy it!
Date published: 2016-02-01
  • y_2017, m_3, d_27, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_202270603, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 81ms