Model # 23054

Internet #202032950

Store SKU #358412

Store SO SKU #1000317772

null 3/4 in. Metal PEX Pipe 90-Degree Bend Support
0697285915152

3/4 in. Metal PEX Pipe 90-Degree Bend Support

$2.92 /each

Frequently Bought Together

Product Overview

The SharkBite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. And with a wide range of fittings, manifolds, regulator, thermostatic, and ball valves available, the SharkBite barb connection system is perfect for your next plumbing project.

  • Metal construction
  • Suitable for use with PEX pipe
  • Compatible with 3/4 in. pipe
  • Wide range of fittings, valves, manifolds, and accessories available
  • Note: Product may vary by store.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

can this be used with rigid pex pipe or can it be used only with rolled tubing ?

Asked by: Jack
I have used successfully with both straight (assume that is what you mean by rigid) and coiled 3/4" PEX.
Answered by: Paperclip2000
Date published: 2017-02-24

can be 3/4 inch pex pipe 90 degree bend support be bent to bend the pipe less then 90 degrees?

Asked by: Eric
No. I don't see how this would work without deforming the bend support. If less than a 90 degree bend is needed I recommend bending by hand and holding the bend in place by securing with clips nailed into studs or joists.
Answered by: Paperclip2000
Date published: 2017-02-24

Is there a 1" in this product

Asked by: Shappins1
No the largest is 3/4"
Answered by: Alectrician
Date published: 2015-09-20

part exceeds minimum bend radius

The actual 3/4 inch metal support has a bend radius of 5 inches. Very difficult to put 3/4 pex in support, and could see some deformation (out of round) in tubing. Why does the part exceed recommended minimum Bend radius of 7 inches as listed on sharkbite website specification
Asked by: Pex
Sharkbite brand tubing is PEX-B. PEX-A has a smaller bend radius with no ill effects.
Answered by: Mark
Date published: 2017-02-12
  • y_2017, m_4, d_24, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_202032950, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/4 in. Metal PEX Pipe 90-Degree Bend Support is rated 4.6 out of 5 by 5.
Rated 4 out of 5 by from Product gets the job done at lower cost than using sharkbite elbow fittings. Would give a higher... Product gets the job done at lower cost than using sharkbite elbow fittings. Would give a higher rating if the metal was a little stronger since the tabs that hold the bend support on the PEX tend to bend a little. Believe that this metal support is superior to the plastic version especially when using with 3/4" PEX.
Date published: 2017-02-24
Rated 5 out of 5 by from great if you need to make tight curves, with pipe protection... These work great, but as it turns out, I did not need them and will be returning them. Make sure you WEAR GLOVES when installing these! They are made by SharkBite, and by the very nature of what these do, and how they work, installing them can take a bite out of your hand very easily. Every curve I needed to make with my piping was accomplished without these units, however, if you do have any tight curves you need to make, and desire some protection for your piping, these are a great solution.
Date published: 2013-04-09
Rated 5 out of 5 by from Sharkbite PEX pipe bend. A great product. Rather than buying a 90 degree elbow to suit PEX pipe, this way is a lot more economic and is quicker to fit. Having a sweep rather an elbow there is less pressure drop.
Date published: 2014-02-25
Rated 4 out of 5 by from Professional look using bend supports The 90 degree bend supports are easy to use with warm tubing and make the installation more professional looking. These supports allow the tubing to be routed closer to framework and make the bend less stressed.
Date published: 2016-07-19
Rated 5 out of 5 by from Good Product Well suited for homeowner applications, facilitates creating turns with pex
Date published: 2012-01-17
  • y_2017, m_4, d_24, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_202032950, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 27ms
  • REVIEWS, PRODUCT