Model # 521-943HN

Internet #100122624

Store SKU #103799

null 3/4 in. x 1/2 in. Black Malleable Iron Hex Bushing
0032888407053

3/4 in. x 1/2 in. Black Malleable Iron Hex Bushing

$2.20 /each

Frequently Bought Together

Product Overview

Connect pipes of different sizes with the Mueller Global 3/4 in. x 1/2 in. black iron hex bushing. Used in gas, oil, and air applications, the reliable hex bushing meets ASTM and ASME standards and has ANSI B 1.20.1 approved threads. The bushing's Class 150 lb. malleable iron construction makes it durable.

  • Inserts into female threading of a fitting to reduce size of a pipe or fitting
  • For use with gas, oil, and air applications
  • Malleable iron class 150 lb.
  • Meets ASTM and ASME standards
  • Threads comply with ANSI b 1.20.1
  • Note: Product may vary by store.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Does this have 1/2-28 internal threads and 3/4-16 external threads?

Asked by: craftysquash
No. This sizing you see is NPT, typically used for Natural Gas pipe. National Pipe Thread Taper (NPT) is a U.S. standard for tapered threads used on threaded pipes and fittings. In contrast to straight threads that are found on a bolt, a taper thread will pull tight and therefore make a fluid-tight seal. The Thread Pitch of 1/2" NPT and 3/4" NPT is 14 TPI (threads per inch). The Pipe Nominal Outside Diameter is 0.84" for 1/2" NPT and 1.05" for 3/4" NPT.
Answered by: circuitbent
Date published: 2016-06-25

Would these fit onto a Maverick 16-Gauge Square Point Shovel with 47 in. Ash Wood Handle.

Would these fit onto a Maverick 16-Gauge Square Point Shovel with 47 in. Ash Wood Handle.
Asked by: Aidan
  • y_2017, m_3, d_29, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_100122624, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/4 in. x 1/2 in. Black Malleable Iron Hex Bushing is rated 3.0 out of 5 by 1.
Rated 3 out of 5 by from Most likely not I think the 1/2 is 1/2-9. It's no more than a 13. If you take standard 1/2" bolt the threads will not match in spacing and your best bet is to go with a smaller size and rework it to the right size. But you are much better off looking for something that is special made,it will end up a lot cheaper. And what could you be do to need threads that are so tight.
Date published: 2015-09-13
  • y_2017, m_3, d_28, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_, sid_100122624, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • REVIEWS, PRODUCT