Model # CT2-664X P

Internet #202495876

Store SKU #367861

null 3/8 in. x 3/8 in. x 1/4 in. Compression x Compression T-Fitting
0026613140933

3/8 in. x 3/8 in. x 1/4 in. Compression x Compression T-Fitting

  • Provides a dual outlet for a water supply valve
  • Allows two supply line to be connected to the fitting
  • Constructed from solid brass for a long-lasting use
$648 /each

Frequently Bought Together

Product Overview

This BrassCraft 3/8 in. x 3/8 in. x 1/4 in. Compression x Compression T-Fitting adds another outlet to a water supply valve allowing 2 supply lines to be connected. This fitting is made from solid brass.

California residents: see   Proposition 65 information

  • Machined from solid brass for high quality
  • Adds a 3/8 in. compression outlet to a water supply valve providing dual outlet capabilities so that 2 supply lines can be connected to the valve
  • Compression connections
  • 125 psi maximum working pressure
  • Complies with the ab 1953/5152 sections of legislation passed in California and Vermont

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

connections

by appearance i believe this fitting has the following connections, are my assumptions correct? 1ea- 3/8 Male end 1ea- 3/8 Female end 1ea- 1/4 Male end
Asked by: bhill
Yes, this is correct.
Answered by: Vlad
Date published: 2016-12-20

Will an o-ring work for replacing washer on 3/8 compression fitting to shut off valve ?

Will an o-ring work for replacing washer on 3/8 compression fitting to shut off valve ?
Asked by: Don
Hi Don - An o-ring cannot be used with this CT2-664X P fitting to connect to a stop. This fitting uses a specific washer that is factory assembled to connect to a stop or another fitting. Please contact our Customer Support Team at 877-272-7755 with any other questions.
Answered by: BrassCraft Mfg
Date published: 2017-05-02

Is this lead-free? There is nothing in the product description about this.

Asked by: VS
VS, thank you for your question. Yes, this BrassCraft T-fittings is No-Lead Certified. We will make sure to update the product page with that information. If you have any other questions, please contact us toll-free at 877-272-7755.
Answered by: BrassCraft Mfg
Date published: 2017-06-07

Can I use this to add a refrigerator water line from a supply that utilizes a braided line?

Asked by: jason
Hello jtag51, Yes. The tee will mount onto you cold water shutoff valve. The top port is connected to the faucet water line while the 1/4" side port is connected to the icemaker supply line. I hope this helps. Cheers, Chris
Answered by: Chris
Date published: 2017-05-05
  • y_2017, m_6, d_27, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_202495876, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 161ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/8 in. x 3/8 in. x 1/4 in. Compression x Compression T-Fitting is rated 4.0 out of 5 by 8.
Rated 5 out of 5 by from Great product , very easy to connect it to my kitchen faucet and to get the ice maker/water run i... Great product , very easy to connect it to my kitchen faucet and to get the ice maker/water run in my new fridge.
Date published: 2017-02-21
Rated 5 out of 5 by from Just what I needed to install a hot water dispenser.... Just what I needed to install a hot water dispenser.
Date published: 2017-03-14
Rated 4 out of 5 by from Works, need teflon tape Use adequate teflon tape and tighten well. will not leak if you do this. leaked without teflon tape - silly me, DIYer... Used this for installing point of care hot water heater under sink
Date published: 2016-10-10
Rated 5 out of 5 by from Does the job Does the job to hook up an ice maker for the refrigerator. Use Teflon tape.
Date published: 2016-09-13
Rated 5 out of 5 by from Works great - easy to install and no leaks Bought this to install a water line for the fridge. It went in fine (I also used teflon tape) and hasn't leaked.
Date published: 2015-02-26
Rated 3 out of 5 by from Description of the product does not include how many threads per inch the thread type is, so I bo... Description of the product does not include how many threads per inch the thread type is, so I bought it then returned back because the size (diameter) was correct but the thread was wrong and did not fit the other part.
Date published: 2016-12-20
Rated 4 out of 5 by from Just what I needed. After our Post-Sandy rehab I needed to replace the feed for our refrigerator water/ice maker. This was exactly what I needed.
Date published: 2016-05-24
Rated 1 out of 5 by from 1/4" Compression Does NOT Seal I have tried to use this to tap off the cold water kitchen sink and run a line to my refrigerator. It installs great, but it leaks! I have tried two separate of these fittings and two separate compression fittings to to PE line to go the the refrigerator. Both times these 1/4" connections have leaked. I will return all of the pieces and am on my way to go get real ones a plumbing supply house.
Date published: 2015-02-24
  • y_2017, m_6, d_26, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_, sid_202495876, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 253ms
  • REVIEWS, PRODUCT