3M 3 oz. Marine Adhesive Sealant-PN5203 at The Home Depot
Free shipping


Model # PN5203

Internet # 100161471

Store SKU # 285848

3 oz. Marine Adhesive Sealant

3M 3 oz. Marine Adhesive Sealant

This item has been discontinued.
The Home Depot no longer carries this specific product.

$6.47 / each
Item cannot be shipped to the following state(s): AK,GU,HI,PR,VI


Model # PN5203

Internet # 100161471

Store SKU # 285848

Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line. Center board trunk joints. Between struts and planking, stern joints, deck housing, etc. Easy to apply with manual caulking gun. Remains workable with trowel or spatula up to 4 hours after application. Won't sag or flow in vertical or horizontal seams.

California residents: seeProposition 65 information

  • High performance polyurethane adhesive/sealant becomes tack-free in 48 hours, cures completely in 5-7 days
  • Strong seal retains strength above or below the water line
  • Excellent resistance to weathering and saltwater
  • Marine, general industrial
  • Bonding, attaching and assembling
  • Dries to the touch in 10 to 15 minutes

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  8.75 in  Assembled Height (in.)  5.6 in 
Assembled Width (in.)  4.875 in  Caulk Form  Standard Tube 
Caulk Type  Latex  Certifications and Listings  No Certifications or Listings 
Color/Finish  White  Coverage (linear ft.)  126 
Cure time (hours)  24  Dry color family  White 
Dry to touch (min.)  2880  Fire and high heat resistant  No 
Individual size (oz.)  Indoor/Outdoor  Indoor/Outdoor 
Manufacturer Warranty  None  Moisture Resistant  Yes 
Mold and mildew resistant  No  Paint Product Type  Sealants 
Paintable/Stainable  No  Permanently flexible  Yes 
Professional Paint Supplies & Values  Pro Supplies  Returnable  90-Day 
Tintable  Yes 


Rated 5 out of 5 by 4 reviewers.
Rated 5 out of 5 by Good boot adhesive The rubber soles of my boots were de-laminating from the leather body. I searched a few hiking forums, and 5200 was one of the recommended adhesives to repair it. I can verify it works really well! I treated it like any other adhesive, including clamping it for 24 hours. Then went on a 20 mile hike, and all is well. It holds and it is waterproof. Too bad the store doesn't carry the black color version. Also, a smaller package at a cheaper price would be nice for these one-shot jobs. But that's nit picking. It was still a lot cheaper than throwing the boots away or professional repair. October 4, 2012
Rated 5 out of 5 by Mr I have been using this product around the house and farm for over 7 years. It is remarkable! My first use of the product was when I discovered two lines leaking on my brother's hot tub. The tub had been installed in such a manner as to make it impossible to replace the plastic pipes unless the tub was completely disconnected and removed. Had to crawl into a very narrow space to apply. Tub was back in operation in 3 days and never leaked again. Since that time I have used it for numerous repairs of PBC pipe and fiberglass containers both in out buildings, portable equipment lines and on equipment cattle watering lines. It has enough flex and strength to withstand the bumping by cattle without breaking for long periods of time. The secret of the successful use, though, is always to allow more “set time” than indicated on the tube. October 27, 2010
Rated 5 out of 5 by Removing 5200 Easy to remove. Use a heat gun to warm the part (if possible) then use the heat gun to heat the putty knife blade as hot as possible, Push the blade through the adhesive - reheat the blade and repeat as neded. That is how we boaters do it. September 22, 2012
Rated 5 out of 5 by PERMANENT! 3m makes 3000, 4000, 42000 and 52000. This is 5200, it is PERMANENT. do not use if you ever want to take something apart... ever! It is used to put the deck on hulls of boats! 95% of the time a consumer really wants 4000 or 4200, both are very strong but will come apart if need be. About the only way to get past 5200 once it has cured is with a piano wire saw, and that presumes you can get to it with a piano wire saw. August 26, 2011
1-4 of 4


Store Exclusive. This item is available for purchase in select stores only.