Rated 4.7 out of 5 by 11
Rated 5.0 out of 5.0 by HappyFlusher Great Product
Great product. Inner diameter of my cast iron pipe is 3 3/4. This fit inside perfectly. Screw into the wood with wood screws and it was really solid. If the piece going in to the cast iron is to long, you can cut it to size with a hacksaw! Saved the day! Happy Flushing!
April 10, 2016
Rated 5.0 out of 5.0 by Ratnak Works like it should - very easy
Removed tile on a concrete on-grade slab floor. Existing flange was too high. Broke the old lip off, then used a heat gun and pliers to remove the remaining part of the oil flange that was inside of the pipe (the plumb in was 4" pipe to a coupling to a 4" inside fit flange -- old house... idk why they did that). Used a bit of standard all purpose mineral oil lubricant on the gasket to make it slip in easy. Got it to the right height. Used some tapcons to hold it down. Then put on my silicone sealing ring (worth every penny) and bolted up the toilet. Remember to grout the toilet and leave a gap in the grout in the back so you can spot a leak if it ever occurred down the road.
Everything is working and holding great. I feel this is a bit on the expensive side at $20... it would be a lot better value at the $10-15 price point.
You do have to kinda know what you are doing to not muck up the process. If you've never installed a toilet or are uncomfortable with plumbing, I would recommend you let someone else do it to prevent a hidden toilet leak that will cause a lot of damage down the road.
September 27, 2016
Rated 5.0 out of 5.0 by Treemunchkins Works!
This 4inch gasket closet flange was exactly what I needed. I am a female and I had no problem installing this and the toilet. So glad Home Depot had it in stock.
June 17, 2016
Rated 4.0 out of 5.0 by wjbtms Good solution to an old copper drain pipe
I did not use the 4 inch version of this product, but the 3 inch version. Worked exactly the same. The problem came with the gasket (wax ring options). First, I tried the latest fluidmaster with no wax. Well their insert will no fit properly into the 3 inch insert flange. It has too big of a diameter (3 inches). Next I figured I could try Danco perfect seal toilet ring. The seal would work with the flange, but it was too thick even with the expansion ring. The toilet would be too far up off the floor. Now my toilet might be partly to blame. It has a 3/4 inch insert for the drain. So, the cheapest, simplest solution worked, a naked wax ring. The three inch unit needs to have warnings about these issues.
June 14, 2015
Rated 5.0 out of 5.0 by Funkyplumber Perfect solution
This worked perfect to slide inside a 4 cast iron sewer pjpe. The old flange appeared to be lead. Just make sure you mount this as flush to the floor (or youll have to shim the toilet) perfect!
October 18, 2015
Rated 5.0 out of 5.0 by JackBurton Worked on a really old pipe.
I live in an old house, was replacing the toilet and discovered a really poor flange installation that was rusted, loose and wasn't even sealed in the pipe. Whoever installed that is a criminal and deserves severe punishment for putting my and the previous owner's health at risk.
I have zero experience as a plumber, did some online research and browsing, saw this, looked good. I like the triple fin design. Installed it easily, snug fit, seems like an airtight seal now so sewer gas can't leak out, good to go.
Picked up some 2" #10 stainless steel sheet metal screws to secure it down, did the job, but you could actually go a size up if you wanted.
April 26, 2014
Rated 4.0 out of 5.0 by Stephanie Fixed the problem.
This provided an xtremely easy fix for an original flange that was facing the wrong direction and could not be turned. This worked like a dream... but the wax ring wouldn't fit so I will have to go with a "naked" wax ring. I'm actually surprised the Home Depot rep didn't recommend this first.
July 19, 2015
Rated 5.0 out of 5.0 by David Works Great on 4" Lead Pipe
Had an old 4" lead pipe that had nothing to attach a flange to. This slid in with a great snug fit. The red gaskets prevent smell from coming back from the pipe. I glued this down with alot of liquid nails. Let dry for 24 hours before replacing toilet. When I put toilet down I liberally applied alot a silicone and secured the toilet to the floor. Let that dry for nearly 36 hours. You could dance on my toilet. It is solid to the floor and doesn't wobble or leak.
January 1, 2015