Model # SE/EN SG

Internet #100672946

null 4-qt. Seal and Enhance
0753927513633

4-qt. Seal and Enhance

$15800 /gallon

Frequently Bought Together

Product Overview

Seal and enhance is a unique, solvent-base formula designed to eliminate the need to use an Impregnation before using a color enhancer for maximum stain protection and superior color enhancement. Seal & enhance is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile, grout, concrete and masonry surfaces. Seal & enhance will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces. In addition, 511 seal & enhance revitalizes old and worn stone and tile installations. It can be used successfully in both interior and exterior environments and is freeze/thaw resistant.

  • Superior stain protection
  • One step
  • Will not yellow
  • Enhances color

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Best application method

We have 1400 ft sq of newly installed granite flooring. Would a lambs wool application method be best, or do you recommend a foam applicator on a stick. Do i then wipe off any residue, and does this leave streaks on the floor tiles.
Asked by: HOLLY
Hudson Sprayer
Answered by: dsb
Date published: 2017-04-14

Can I put this over a flagstone patio that has been sealed?

I have a new flagstone patio that was cleaned and sealed, but now a couple of weeks later, the patio looks like it was not sealed and has that new stone look again. I think it just was so porous that it soaked up the sealer. When it is wet, the color is deep and beautiful. When it is dry, I'm wishing it had that wet look. Can I put this on my patio?
Asked by: mountaingirl
Very likely...test small area before proceeding....
Answered by: dsb
Date published: 2017-04-14

how many square feet does a gallon cover?is it approved for outside use on quartzite?Is it slick afterward?

Asked by: Keno
I did the online quantity calculator, and it said for 300SF I would need 5 quarts. So, it doesn't make sense that 4 quarts would cover 4000SF. Am quite confused.
Answered by: RR
Date published: 2017-04-14

Does this product work as shiner too? I want to use for FlagStone for Patio. My patio is new.

Does this product work as shiner too? I want to use for FlagStone for Patio. My patio is new.
Asked by: Dushyant
Yes it will provide some added shine to the stone. See attached photo, right side is after 2 coats rubbed into very non-porous slate. The more coats the more shine. BUT it will never be as shinny as some of the glossy coatings you can apply to indoor tile. This sealer / enhancer is the only product I will use on outdoor natural stone projects. All others I have tried crack and flake off with just a little exposure to the sun. It also keeps water from seeping through the grout and then causing problems if you live where you might have below freezing weather. It is expensive but covers well if you apply sparingly and rub it in. Your wide grout lines will soak up a lot of the product. decreasing your coverage. Since the water will bead up, it will make the surface more slippery when wet.
Answered by: Slate
Date published: 2017-04-29
  • y_2017, m_5, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_, sid_100672946, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 129ms
  • QUESTIONS, PRODUCT

Customer Reviews

4-qt. Seal and Enhance is rated 4.6 out of 5 by 17.
Rated 5 out of 5 by from Worth the expensive price For one Gallon, I paid a lot, but my research kept bringing me back to this product. For an 18 x 30 ft flagstone patio, and and 4 x 30 ft walkway, I used most of 2 gallons. The best way to apply it, for me, was with a short, or cut off paint brush ( I went through 3 of them). This will ensure total coverage of every inch of mason and rock. I tried a roller, but it did not get into the nooks and crannies. I also tried a sponge, but the roughness of the stone and mason tears it, and leaves it's pieces in the mix.The first coat will be soaked up and penetrated into the stone. The second coat will show you more of the enhancement features. I did three coats all together, and I am definitely please with the results.
Date published: 2013-10-19
Rated 5 out of 5 by from Very easy to use The product is very easy to use, the hardest part being on your knees in order to apply it. Make sure that whatever you use to wipe up the excess is absorbent enough. I bought some cheap shop towels that were not absorbent enough on the first application and it was a pain. After that I went to goodwill and bought some inexpensive cotton towels and cut them up, much better. If your in an enclosed space you will need a respirator with a vapor cartridge on it, I got a cartridge for less than $20 that fit my respirator. Vapors cleared up is a few hours with the small windows open and a fan going. Finished product looks very good, not to shinny. The only word of caution is don't apply to too big of an area at once, if the product starts to dry before you wipe it off it will start to get sticky, just apply a little more product onto the sticky area and it will wipe right off. I used this product because I didn't want the travertine to end up too shinny and this is what two professional tile masons recommended.
Date published: 2015-11-10
Rated 5 out of 5 by from Expensive, but for slate flooring you can't beat it If you want to seal and enhance the color of natural stone with a little bit of adjustable shine, this is the only product that lasts. If you have the stone outside in a climate where it might freeze, there is nothing else you can use without risk of freeze thaw damage to the stone. It goes on sparingly unless the stone is porous. You can control the sheen based on how much you rub off AFTER you let it sit for 3-5 minutes. Do not apply much. You can always do a second coat. Multiple coats give high level of shine. This product does not flake off like other waxed based coatings. It is interesting that it is not allowed to be shipped to all States, have not found out why.
Date published: 2016-04-19
Rated 4 out of 5 by from Expensive but decent product I used this product with a pump sprayer to cover my driveway of flagstone. Coverage was good. Product is crazy expensive. I wish it were offered at a lower price in gallon cans.
Date published: 2011-07-23
Rated 5 out of 5 by from This product is exceptional compared to most other sealants. The color enhancement is excellent ... This product is exceptional compared to most other sealants. The color enhancement is excellent and it is extremely durable. I am always amazed at how much stone or rock I can effectively with one single coat.
Date published: 2016-11-08
Rated 5 out of 5 by from Sealant Great stuff but a little pricey. Repels water well
Date published: 2016-09-14
Rated 5 out of 5 by from easy to put on. just one time and the flag stone is beautiful. love it. going to put on again in the fall. it made the flag stone look great. want to protect it more and make it even more beautiful.
Date published: 2013-07-27
Rated 4 out of 5 by from Worked well on slate I was using this product for my front entry and back patio areas. Both areas are slate floors that are covered. It is very easy to use with either a clean rag for smaller areas or a roller for the larger areas. Even though I thought I had thoroughly cleaned the slate with mild soap and water, my test area came out dull and my rag was filthy. I had to clean my floors 3-4 times to pull all the dirt out and achieve the luster with the Seal & Enhance that I was expecting.
Date published: 2014-06-24
  • y_2017, m_5, d_23, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_, sid_100672946, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 85ms
  • REVIEWS, PRODUCT