Rated 4.8 out of 5 by 34
Rated 5.0 out of 5.0 by Barbie Easy project to assemble
Very simple to put together and enjoy a fire all in the same night. Our individuals form our group home love to look at the sky line and cook some s'mores, relax and sit by the fire.
August 9, 2016
Rated 5.0 out of 5.0 by NRAinTucson Fire pit
Easy install, looks great. Getting ready to fire it up.
October 11, 2016
Rated 5.0 out of 5.0 by mrt Fire Pit
Already have had several fires and we are all loving it, so relaxing. Fire pit was very easy to put together used two bags of crushed stone on bottom fires burn down well no clean up
September 27, 2016
Rated 4.0 out of 5.0 by Merovingian Nice, BIG Fire Pit !
Came preassembled and shrink wrapped on a pallet and requires disassembly to move it to the desired installation location. We unwrapped the pallet, removed the metal ring and, in order to reassemble it the same way it came, numbered the brick rows on the inside of the pit with a marker (top row was all 1's, 2nd row all 2's, etc.).
The pit comes with everything you need EXCEPT one thing, the 29oz caulk gun needed for the gigantic tube of brick adhesive in the box. Since we, like most folks, only had the typical 10oz caulk gun, it required an extra trip to the local HD for the bigger gun ($10).
Other than that, delivery, condition, installation, looks ... all great !
February 23, 2014
Rated 5.0 out of 5.0 by Ringer Great kit for an informal fire pit!
The kit, weighing over 1000 pounds, arrives at the store on a pallet. Two HD guys helped me unload the pallet and load each block into my Outback..... very helpful. Kit comes complete with everything needed, but I had to buy an extra tube of adhesive to finsh the job. If you don't have a LARGE caulck gun, pick one up before you leave HD. Be aware that a good wire brush is needed to clean dust from the blocks before gluing. Note that there are 3 extra blocks shipped with the kit!!
For the finished product... it's a nice firepit. The blocks have slight spacing between them so the pit is vented as needed. The steel ring IS very heavy duty. It should last a lifetime. As with any project, prep is the key... I put in a stone base set the pit on stone pavers. Once glued and assembled, this is a great-looking, sturdy fire pit at a great price (purchased on sale). I would recommend!
August 23, 2014
Rated 5.0 out of 5.0 by Fiszot E-Z install Firepit!
Delivered on pallet to curbside, simply removed shrink wrap and re-assemble on gravel/sand base, ready to use!
August 5, 2014
Rated 5.0 out of 5.0 by Jack The overall appearance and performance of this "fire pit" is outstanding.
The toughest part of this installation is getting the area ready for the blocks. While you could just place on a solid level area, we dug out a 16 foot circle 4" deep, then a 5 foot circle another 6" deep to place in a concrete footer with a 2" foot hole in the middle for drainage. Once the concrete ring base was ready for installation (Note: I used plastic 4" edging to make the inner and outer circles of the foundation with many supports around the inside and outside). The actual building of the block fire pit took less than 45 minutes. Then back filled the entire area with two tons of 3/4" River Jack Stone. The instructions are easy, caulking is included (need a large caulking gun) and even included heavy duty gloves. Looks great and finished with the black metal ring around the top.
July 2, 2013
Rated 5.0 out of 5.0 by Mickie The product was outstanding.
The fire pit was very easy to assemble and of very good quality. It really looks attractive in the yard. I highly recommend this product to anyone.
April 9, 2014