Model # 26B90E6

Internet #100137549

Store SKU #258311

Store SO SKU #1000684138

null 6 in. 26 Gauge 90 Degree Round Adjustable Elbow
0050206923368

6 in. 26 Gauge 90 Degree Round Adjustable Elbow

$5.20 /each

Frequently Bought Together

Product Overview

Master Flow's Heavy Gauge Adjustable Elbows are used to make angular turns in round pipe to vent boilers, furnaces and hot water heaters where allowed by code. They have a sturdy galvanized steel construction and are simple to adjust. They are also crimped on one end to easily fit into a pipe or other fitting of the same diameter.

  • Used to make angular or gradual turns in runs of pipe
  • Adjustable to any angle through 90 degrees
  • 26 gauge, galvanized steel construction
  • Crimped end for easy installation
  • Always insulate ductwork for greater system efficiency and comfort

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Is this elbow rated for 2' wg

Asked by: Jr
2 feet is a lot of pressure, I assume water column not mercury. Most furnace blowers will blank off at around 1" (inch) water column. I would suggest Jr expound on the application in mind.
Answered by: TC
Date published: 2017-01-02
  • y_2017, m_4, d_24, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_100137549, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 42ms
  • QUESTIONS, PRODUCT

Customer Reviews

6 in. 26 Gauge 90 Degree Round Adjustable Elbow is rated 3.9 out of 5 by 14.
Rated 2 out of 5 by from The heavier gauge (26) was so difficult to setup at 90 that it came apart! The lighter gauge work... The heavier gauge (26) was so difficult to setup at 90 that it came apart! The lighter gauge worked better though it will probably not last as long.
Date published: 2016-11-08
Rated 1 out of 5 by from Cheap Evem if your in a bind dont buy these i bought 2 and both came apart at seems very easily
Date published: 2017-04-07
Rated 5 out of 5 by from As expected Item functions as expected. Build quality is good and longevity of item is not a concern.
Date published: 2017-03-10
Rated 5 out of 5 by from Exactly what I needed to make the offset in my duct work. Exactly what I needed to make the offset in my duct work.
Date published: 2017-01-31
Rated 5 out of 5 by from What's to say.. its an adjustable 6" ell. What's to say.. its an adjustable 6" ell.
Date published: 2016-12-31
Rated 5 out of 5 by from Good product, priced right. Good product, priced right.
Date published: 2016-10-26
Rated 5 out of 5 by from Fully adjustable from 0-90 degrees I used this to turn a corner just shy of 90 degrees. Each segment lets you turn it to build up to a 90 degree angle. Luckily this not only gave me the angle I needed up lined up perfectly. I used HVAC screws to secure it then mastic to seal all my seams. I had no idea on the best practices for installing the ducting going in but the staff at the Merrifield Va Home Depot walked me through everything. The installation impressed my HVAC guy who remarked it looked professionally installed when he came to service my system.
Date published: 2015-11-03
Rated 5 out of 5 by from Got my whole-house humidifier perfectly around PVC drain pipe next to furnace no problem Nobody likes to pay several dollars for something like this, but when you need it like I did, you'll be thankful you spent that little bit extra. I used two of these together directly off my whole-house humidifier and right into the supply vent of my central air duct. The hardest part is adjusting the duct elbow to your exact requirement, but this is just a matter of professional DIY install. The duct is quality constructed and is absolutely quiet when the furnace fan is blowing the humidified air through it.
Date published: 2015-10-02
  • y_2017, m_4, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_, sid_100137549, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 116ms
  • REVIEWS, PRODUCT