0697285601376

Model 22791

Internet #202032997

Store SKU #639070

Store SO SKU #1000313719

8 in. x 1/2 in. Copper PEX Barb Stub-Out 90-Degree Elbow

$7.50 /each

Frequently Bought Together

Product Overview

The SharkBite 1/2 in. Copper 90° Barb x Barb Stub Out Elbow features lead-free copper construction that's ideal for connecting PEX tubing in water distribution systems. Used for transition between PEX tubing and copper pipes to stub out of the walls or floors. The PEX Stub out elbow can be connected to PEX Pipe with copper rings or PEX Clamp rings.

California residents: see   Proposition 65 information

  • Lead free copper construction
  • Low-cost plumbing connection system
  • Barb connection
  • Compatible with PEX pipe
  • NSF listed
  • Meets UPC, IPC, and cUPC requirements
  • Fittings work with crimp ring or clamp connection methods
  • Rated to 200°F and 200 psi
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions4 Answers

Customer Questions & Answers

8 in. x 1/2 in. Copper PEX Barb Stub-Out 90-Degree Elbow
8 in. x 1/2 in. Copper PEX Barb Stub-Out 90-Degree Elbow

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

8 in. x 1/2 in. Copper PEX Barb Stub-Out 90-Degree Elbow?

This question is from 8 in. x 1/2 in. Copper PEX Barb Stub-Out 90-Degree Elbow
Asked by
Pottsville, Pa.
Read all my Q&A
June 29, 2015
(8 in. x 1/2 in. Copper PEX Barb Stub-Out 90-Degree Elbow) is this product used to remove the bang in the water line when associated with the clothes washer?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

June 30, 2015
Answer: 
No, what you are needing is a water hammer arrestor. http://www.homedepot.com/p/SharkBite-1-2-in-Brass-Push-to-Connect-Residential-Water-Hammer-Arrestor-Tee-22630LF/204417388
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 30, 2015
Answer: 
This product can be used for that purpose.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Can this product be used for the stubout for a tube spout?

This question is from 8 in. x 1/2 in. Copper PEX Barb Stub-Out 90-Degree Elbow
Asked by
MD
Read all my Q&A
August 10, 2016
Running new pex water lines for bathroom remodel. I have been told both by Delta and Moen not to run pex to the tub spout. Not wanting to really learn how to work with copper tubing and fittings just for the tub spout, I was wondering if this product could be used for the new copper tub spout?

Thanks in advance any help.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 12, 2016
Answer: 
Yes, this stub out can be used for a tub spout. Once installed, you will need to cut the stub out to the desired length and sweat a copper male adapter to attach the spout. Thanks for your interest in out products.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Won't sweating a valve onto this ruin the pex joint inside the wall??

This question is from 8 in. x 1/2 in. Copper PEX Barb Stub-Out 90-Degree Elbow
Asked by
Atlantic COunty New Jersey
Read all my Q&A
March 7, 2016
If I sweat a valve onto this it is going to heat up the entire piece including where it attached to the pex pipe (inside of the finished wall). Surely wrapping a wet towel around this as close to the wall as possible while attaching the valve is not the proper way. What is the correct way to do this???

Thank you!!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

March 10, 2016
Answer: 
Hi Marc,
The recommended way to do this is to crimp the PEX to the stubout behind the wall, hang the drywall, and then cut the end off the stubout and use a SharkBite Push to Connect angle or straight stop to connect to the stubout. With SharkBite PTC, there are no tools
Read More
Hi Marc,
The recommended way to do this is to crimp the PEX to the stubout behind the wall, hang the drywall, and then cut the end off the stubout and use a SharkBite Push to Connect angle or straight stop to connect to the stubout. With SharkBite PTC, there are no tools required.
http://www.homedepot.com/p/SharkBite-1-2-in-Chrome-Plated-Brass-Push-to-Connect-x-3-8-in-O-D-Compression-Quarter-Turn-Angle-Stop-Valve-23036-0000LF/202270612?keyword=23036-0000lf
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-08-29 T15:42:43.209-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202032997, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 42ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 89ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;