Rated 3.4 out of 5 by 7
Rated 5.0 out of 5.0 by jasonOH Outstanding cart for a Lincoln SP-135T
Just put this cart together this morning. It is perfect for the Lincoln SP-135T 110v MIG machine. The front bracket has holes that line up with existing sheet metal screws on the welder, so it's literally bolted to the cart. My waist high shielding gas bottle fits in nicely and it's trapped in place by tabs on the lower and by the hole in the upper deck and absolutely cannot fall over and no silly chain needed. Hung the leads with double sided velcro wrap from the handle. Boom. Awesome cart for a small welder.
December 27, 2015
Rated 5.0 out of 5.0 by JT Great welding cart
Excellent companion cart for my new Lincoln welder. Sturdy once put together. The only issue I found is the mounting holes to secure the welder are off depending on the model. I bought the 180 and the mounting hole is way off.
February 16, 2015
Rated 2.0 out of 5.0 by TommyCRWW Too small....
They recommended this cart to go with the we Everlast Power Pro 205s multi function welding machine I purchased... It's too small for the machine.... Works, but it's really tight fit and hard to get to the control board....
March 10, 2015
Rated 3.0 out of 5.0 by James Not bad for the price
I bought this to hold my Lincoln 180C MIG welder, and for that purpose it's fine. It bolts up perfectly to the welder and provides a steady mount. On the other hand, the cart is made almost entirely from sheet metal and takes extra effort to assemble due to holes not lining up and tabs not being bent correctly. Like most things made of sheet metal, the holes and features aren't precisely where they're supposed to be particularly after bends are made. I also noticed the front of the bottom plate could be bolted to the vertical angled steel legs to provide a little more stability (drill two holes in each leg and add your own fasteners).
The mount for the tank in the back isn't very good at all. Your tank is only held in place by three tabs in the bottom sheet metal plate. Since typical tanks have a rounded bottom they tend to jump and slide around and over the tabs. I'm probably going to weld a little more steel onto the tabs and add some material to make this a little better. The mounting location puts the tank in the middle of the cart and only an inch or so from the back of the welder, precisely where the gas line (that comes with the welder) leaves the back of the case. What a dumb design considering it's made to hold a Lincoln welder. I'm probably going to need a new hose with 90 degree fitting to remedy this interference issue.
So, overall, three stars. Minus a star for the bad tank mount and location. And one more for requiring so much time to assemble. It's a decent cart, but it could be better with a few design tweaks. You're only getting your money's worth with this one and not much more than that.
December 31, 2014
Rated 1.0 out of 5.0 by BSA69 Piece of Junk.
Had to shim with washers to make pieces fit. Poor quality.
July 27, 2014
Rated 4.0 out of 5.0 by Sht12 Lincoln wire feed cart
The lead time on this product was a bit long. The Lincoln welding cart is perfect for any Lincoln wire feed welder. It is also very stable with an 80 lb shielding gas tank on it.
March 11, 2014
Rated 4.0 out of 5.0 by LeahcIm Lincoln Welder Cart.
Generally well made and functional.
I was disapointed that my new Lincoln MIG welder wasn't a perfect fit.
1. The gas bottle tends to crowd the welder.
2. There aren't pre-drilled holes for attaching the welder to the top of the cart.
Otherwise it works fine.
December 29, 2011