Model # 314002

Internet #100345508

Store SKU #411396

null 9 in. x 12 in. Hands-Free Heat Shield
0038753314006

9 in. x 12 in. Hands-Free Heat Shield

$14.89 /each

Frequently Bought Together

Product Overview

The Oatey 9 in. x 12 in. Hands-Free Heat Shield helps protect studs, walls, floors and other surfaces from sparks or flame. Made with flame-retardant Zoltek Pyron fibers. The protector is ideal for use while soldering near studs, joists or walls.

  • Protects studs, walls, floors and other surfaces from sparks or flame
  • Can be used while soldering near studs, joists or walls
  • Ideal for use with propane and Max Power Propylene (MAPP) gas torches
  • Made with flame-retardant Zoltek Pyron fibers
  • 9 in. x 12 in. cloth
  • Withstands temperatures up to 2,500 degrees Fahrenheit
  • Includes brass eyelets for hanging from a stud or wall

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

1 Question0 Answers

Customer Questions & Answers

9 in. x 12 in. Hands-Free Heat Shield
9 in. x 12 in. Hands-Free Heat Shield

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
0 answers

can i use this product to cover a sprinkle head from busting

This question is from 9 in. x 12 in. Hands-Free Heat Shield
Asked by
dallas
Read all my Q&A
June 9, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-30 T23:27:35.309-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestions
  • loc_en_US, sid_100345508, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • QUESTIONS, PRODUCT

Customer Reviews

9 in. x 12 in. Hands-Free Heat Shield is rated 5.0 out of 5 by 9.
Rated 5 out of 5 by from I needed to Sweat Solder a pipe 3 inches from a water heater, and wanted to make sure it was comp... I needed to Sweat Solder a pipe 3 inches from a water heater, and wanted to make sure it was completely protected. I tested this on a few of the other soldering points and there was virtually no heat transfer from my Map-Pro torch. I also needed to sweat solder against some drywall and used this as well, with only about an inch between the wall and the pipe. It worked perfectly. I highly recommend it, and wouldn't have been able to complete the job safely without it. It is very lightweight, easy to tape against whatever you need.
Date published: 2016-11-29
Rated 5 out of 5 by from Amazing product I am very much impressed with this product to protect the wood and sheetrock from propane torch heat. To repair the frozen pipe damage of baseboard radiator, I need to solder the elbow joint copper pipe that is tightly against wood floor and wall baseboard. No burn mark or damage to the surounding wood at all. It would not be possible to repair the copper pipes without this unless tearing the ceiling apart underneath.
Date published: 2017-01-02
Rated 5 out of 5 by from Can put a flame right on it Had to replace some burst copper pipes in my home after last weeks negative temperatures( middle of February 2016, Boston Ma). I am a plumber by trade and consider myself very good with a torch. However one of the areas I had to use a torch was the tightest I've ever dealt with. With this heat shield right behind the fittings and the flame aimed directly at it, I had no issues. Never used one before this but this will definitely be kept in my truck for future situations that are questionable. Definitely recommend
Date published: 2016-02-23
Rated 5 out of 5 by from I used this heat shield while repairing some 1/2"" copper pipe under my house. It worked well and ... I used this heat shield while repairing some 1/2" copper pipe under my house. It worked well and gave me comfort as it protected the floor joist in my work area.
Date published: 2016-10-26
Rated 5 out of 5 by from A must-have for soldering! This cloth works wonderfully if you're soldering in a wall! I've used scraps of sheet metal in the past, but it doesn't always fit where you need it. This will keep you from singeing the adjacent drywall and studs.
Date published: 2011-11-01
Rated 5 out of 5 by from Need a heat shield.... Buy this. I have used this in a number of close quarters. In one case, a copper pipe ran right along a stud. With this I was able to solder it in a tight crawl space. The torch was directed right at the shield that masked the stud. The stud showed nothing. It's fine for propane (I can't say I'd go hotter than that - I just don't know). I have used this to shield ceilings and painted areas. It's incredible. You think you can't solder in close spots or corners for fear of burns... end your problems by getting this amazing product.
Date published: 2014-04-18
Rated 5 out of 5 by from works great Product worked just as it should. Had some close quarters with some studs soldering some copper pipe. After completion I checked the studs. It wasn't even warm to the touch.
Date published: 2015-02-15
Rated 5 out of 5 by from HEAT SHEILD USED THIS HEAT SHEILD INCHES AWAY FROM STUDS . NO HEAT GOT THRU I AM VERY PLEASED WITH THIS PRODUCT AND WOULD RECOMMEND IT
Date published: 2015-06-02
  • y_2017, m_1, d_14, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_100345508, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • REVIEWS, PRODUCT