Model # UDVB234610

Internet #202389935

ADO Products Durovent 23-1/2 in. x 46 in. Rafter Vent with Built-In Baffle 10/Ctn
0723897100362

ADO Products

Durovent 23-1/2 in. x 46 in. Rafter Vent with Built-In Baffle 10/Ctn

  • Aids attic ventilation
  • Lightweight and moisture resistant
  • One step installation
$2547 /carton
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Aids attic ventilation
  • Lightweight and moisture resistant
  • One step installation
Each carton contains 10 Vents. The ADO Products Durovent 23-1/2 in. x 46 in. Rafter Vent with Built-In Baffle helps keep air moving in your attic. The ventilation system features polystyrene construction, which is lightweight and moisture resistant and the integrated baffle means that you need no blocking material between the vent and the top plate.
  • Install between rafters to provide an unobstructed air channel through insulation to help keep air flowing freely from soffits to ridge vents
  • Ideal for high-volume new construction or inexpensive re-insulation
  • Designed to friction-fit between the rafters or trusses with the vent's cones pushed up against the roof deck
  • Secure the vent in place by stapling the wide nailing flanges to the truss and top plate by using a horizontal stroke with your hammer tacker (hammer tacker not included)
  • Polystyrene material provides a lightweight air channel
  • Water resistant and durable, blocking out moisture and wind from penetrating the attic, to satisfy most building-code requirements
  • Economical way to meet energy code requirements for air flow
  • Integrated baffle eliminates the need for blocking material such as batt insulation between the vent and the wall top plate, as is commonly the practice for installation of rafter vents without an integral baffle
  • How much do you need? Let our calculator help:
    Insulation calculator button

Product Overview

Each carton contains 10 Vents. The ADO Products Durovent 23-1/2 in. x 46 in. Rafter Vent with Built-In Baffle helps keep air moving in your attic. The ventilation system features polystyrene construction, which is lightweight and moisture resistant and the integrated baffle means that you need no blocking material between the vent and the top plate.

  • Install between rafters to provide an unobstructed air channel through insulation to help keep air flowing freely from soffits to ridge vents
  • Ideal for high-volume new construction or inexpensive re-insulation
  • Designed to friction-fit between the rafters or trusses with the vent's cones pushed up against the roof deck
  • Secure the vent in place by stapling the wide nailing flanges to the truss and top plate by using a horizontal stroke with your hammer tacker (hammer tacker not included)
  • Polystyrene material provides a lightweight air channel
  • Water resistant and durable, blocking out moisture and wind from penetrating the attic, to satisfy most building-code requirements
  • Economical way to meet energy code requirements for air flow
  • Integrated baffle eliminates the need for blocking material such as batt insulation between the vent and the wall top plate, as is commonly the practice for installation of rafter vents without an integral baffle
  • How much do you need? Let our calculator help:
    Insulation calculator button

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
46
Product Height (in.)
2
Product Width (in.)
24

Details

Insulation Type
Accessory
Returnable
90-Day

Warranty / Certifications

Warranty Information
None

Specifications

Dimensions

Product Depth (in.)
46
Product Height (in.)
2
Product Width (in.)
24

Details

Insulation Type
Accessory
Returnable
90-Day

Warranty / Certifications

Warranty Information
None

More Products With These Features

Search

Questions & Answers

Can I install the baffles from outside the house?

Asked by: Hambone
Yes. That's the best way to do it. Simply clean out the old insulation if any is in the way, bend the end of the baffle to the approximate pitch of the roof. Push into place and then staple to the rafters.
Answered by: Dave
Date published: 2017-06-18

can this be used with spray foam expanding insulation, vaulted ceiling with 2x6 rafters.

can this be used with spray foam expanding insulation, vaulted ceiling with 2x6 rafters.
Asked by: frank
Yes we have had customers spray foam against this product. Please make sure to add staples into some of the cones to give greater strength to the mid-section before spray foaming. Then foam in a light sweeping motion so heat does not build.
Answered by: ADO3
Date published: 2017-08-15

Do you only install one at each soffit vent or each rafter opening??

Asked by: Bob
Current building codes require that eave baffles maintain the same net free area as the soffit vent. An 8" x 16" soffit vent is approximately 58 sq in of net free area. That would require 3 eave vents for each soffit vent. Ideally, and part of the design of this particular product, you would put an eave vent in each truss bay (rafter opening).
Answered by: JP
Date published: 2017-06-01

Does this come in a smaller size? I need them to fit 16" centers.

Asked by: Sme5
They make the same product that is 14.5 wide for use on 16" centers
Answered by: JP
Date published: 2017-06-10
  • y_2017, m_9, d_23, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_, sid_202389935, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms
  • QUESTIONS, PRODUCT

Customer Reviews

Durovent 23-1/2 in. x 46 in. Attic Ventilation System with Built-In Baffle 10/Ctn is rated 4.3 out of 5 by 27.
Rated 1 out of 5 by from Dont buy this product, buy Amerimax vent. It barely does its job, there is a much better product out there to use. The problems with this one? 1. It tears super easy. Not good when you are draging them around a cramped attic. Also, when you try to nail/staple it to rafters, the nail or staple head is likely to pull through. Or if you push insulation too hard against the product, it is likely to tear loose. 2. There is no way to adjust the width of this product. If you have a skinny bay, you have to cut the product down to size and therefore you lose your nailing strip on one size. 3. It is hard to get the bottom part bent around and held in place for instalation. I used the product as a retrofit, so I had a hard time in a crammped attic getting the vent into shape and then putting it in place. Especially since my house has a hip roof with a shallow slope.
Date published: 2017-02-08
Rated 4 out of 5 by from Easy to cut and fit rafter openings. Was light and... Easy to cut and fit rafter openings. Was light and would bend or split real easy. Had to go slow and gentle with install
Date published: 2017-07-18
Rated 5 out of 5 by from The vents were easy to work with and install. I... The vents were easy to work with and install. I am very pleased with the product.
Date published: 2017-04-19
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-05
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-21
Rated 5 out of 5 by from work great ..easy install work great ..easy install
Date published: 2017-05-16
Rated 4 out of 5 by from Soffit baffle in new construction Installed. Durovent styrofoam material is rather thin, easily torn by roofing nails, wood splinters, etc. Depending on pitch of roof, may not be long enough to be deep enough for desired blow in insulation. Covered 2x6 top plate well enough. 2x4 truss, not very high, hard to staple well here. Vent fit well between rafters. I read staples pull through over time and vents fall down. Use a second outer material to staple through? Not just the foam.
Date published: 2016-04-19
Rated 5 out of 5 by from Work very well Just what I needed. Planning on adding another 15 inches of insulation to the attic over the old insulation. No baffles had ever been put in before so I needed to install them. Good Product. Easy to install.
Date published: 2016-04-05
  • y_2017, m_9, d_23, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_, sid_202389935, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 104ms
  • REVIEWS, PRODUCT