Model # 1404N30-AFC

Internet #205070959

Store SKU #368820

AFC Cable Systems 12/2 x 100 ft. BX/AC-90 Armored Electrical Cable
0077680273482

AFC Cable Systems

12/2 x 100 ft. BX/AC-90 Armored Electrical Cable

  • Meets all applicable OSHA and HUD Requirements
  • Interlocking cross-sections that are flexible
  • Maximum Voltage Rating of 600V
$60.56 /each

Frequently Bought Together

Product Overview

The AFC Cable Systems, Inc. 100 ft. 12-Gauge BX/AC-90 Cable features a black finish for easy identification and interlocking galvanized steel armor construction for strength. UL listed for through-wall penetrations. Made in USA.

  • Designed for use with commercial, industrial and multi-residential branch circuits and feeder wiring
  • Use for power, lighting, control and signal circuits
  • Can be fished, surface mounted, embedded in plaster and used in environmental air-handling spaces
  • Interlocking galvanized steel armor provides durability
  • Phase/circuit stripes for easy identification
  • Integral bond wire and armor equipment ground fault path
  • Copper conductor material
  • UL listed
  • 100 ft. L
  • 12-Gauge
  • Click to learn the factors you must consider when wiring your home

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

12/2 x 100 ft. BX/AC-90 Armored Electrical Cable
12/2 x 100 ft. BX/AC-90 Armored Electrical Cable

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
1 answer

That size hole needs to be drilled to accept cable?

This question is from 12/2 x 100 ft. BX/AC-90 Armored Electrical Cable
Asked by
Fairbanks Alaska
Read all my Q&A
August 10, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
August 12, 2016
Answer: 
The overall diameter for 12-2 Solid AC90 is 0.514”, the hole should be larger than the indicated O.D.. Please also consult NEC section 300.4(A)(1) which speaks to protection of cables through bored holes. Both exposed and concealed location, where a cable is installed through bored holes in joists, rafters, or wood members, holes shall be bored so that the edge of the hole is not less than 32 mm (1-1/4 Read More
The overall diameter for 12-2 Solid AC90 is 0.514”, the hole should be larger than the indicated O.D.. Please also consult NEC section 300.4(A)(1) which speaks to protection of cables through bored holes. Both exposed and concealed location, where a cable is installed through bored holes in joists, rafters, or wood members, holes shall be bored so that the edge of the hole is not less than 32 mm (1-1/4 in.) from the nearest edge of the wood member. If this distance can’t be maintained, the cable shall be protected from penetration by screws or nails by a steel plate(s) or bushing(s), at least 1.6 mm (1/16 in.) thick, and of the appropriate length and width installed to cover the area of the wiring.For further details please see NEC section 300.4 “Protection against Physical Damage” Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T00:40:36.352-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205070959, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;