AO Smith 1/2 HP Blower Motor-DL1056 - The Home Depot
Message to Our Customers
Discontinued

AO Smith

Model # DL1056

Internet # 203565012

1/2 HP Blower Motor

AO Smith 1/2 HP Blower Motor
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$87.89 / box
Loading...

PRODUCT OVERVIEW

Model # DL1056

Internet # 203565012

AO Smith 1/2 HP 115 Volt 1PH direct drive three speed Indoor blower motor replaces many furnace and fan coil motors. This blower motor has versatile mounting for direct drive applications and has reversible rotation. Requires a 10MFD 370 Volt Capacitor (not included).

California residents: see  Proposition 65 information

  • 1075 RPM
  • Rated 6.5 Amp Max 9.0 Amp
  • Rated 40 C ambient temperature
  • 1/2 X 4.5 in. shaft
  • Uses a 10MFD / 370 Volt capacitor (not included)
  • Sleeve bearing
  • 5-5/8 in. Diameter
  • 48Y Frame
  • 26 in. Leads
  • Standard efficiency
  • 2-1/4 Rings with 2-1/2 adapters

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.) 
13 in 
Assembled Height (in.) 
7.4 in 
Assembled Width (in.) 
6.9 in 
Product Depth (in.) 
13 
Product Height (in.) 
7.4 
Product Width (in.) 
6.9 
Details
Amperage (amps) 
6.5 
Brand/Model Compatibility 
Replaces many OEM models 
HVAC application 
Heating 
Horsepower (hp) 
.5 hp 
Product Weight (lb.) 
15.35 lb 
Returnable 
90-Day 
Voltage (volts) 
115 
Warranty / Certifications
Manufacturer Warranty 
1 Year 

CUSTOMER REVIEWS

Rated 5.0 out of 5 by 3 reviewers.
Rated 5.0 out of 5.0 by Replaced 1960's furnace motor. I purchased this to replace a furnace motor installed in 1966, so the installation was not a simple in, and out, process. However, if you are a reasonably experienced DIYer, it was straight forward. The wiring had to be deciphered, and the mounting to the fan had to be adjusted, and, also, the original motor did not have an external capacitor, so that added a little extra doing. FYI, the yellow wire is the Common/neutral; I had to get online to learn THAT bit of important info. I had to purchase an expensive hub puller to remove the fan from the shaft of the motor; be sure to loosen the motor mounting brackets before using the puller, and keep the puller straight to prevent distorting the hub. January 10, 2015
Rated 5.0 out of 5.0 by good value When the blower motor in my Carrier furnace went belly up, I was looking at about $300 for an original equipment replacement, plus probably that much more for professional installation. This AO Smith motor cost about one third of that, was a direct replacement and was a snap to install. It turned out to be a good decision! August 6, 2013
Rated 5.0 out of 5.0 by This product was an exact replacement no modifications necessary The only thing I would recommend a couple of wires did not have clips and I had to add them on. I would put the clips on all wires to save the customer time. April 24, 2014
  • 2015-05-26T10:44:06.140-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_203565012, prod, sort_default
1-3 of 3

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.