Free Shipping and BOPIS

Active Ventilation

Model # PV-14-C1

Internet # 202321470

14 in. Dia Aluminum Roof Louver Exhaust Vent in Mill Finish

This item has been discontinued.
The Home Depot no longer carries this specific product.

$36.96 /each




Model # PV-14-C1

Internet # 202321470

Active Ventilation Products roof louver product line, the Pop Vent, is excellent for venting attic spaces on shingled sloped roofs. Pop Vent Model PV-14-C1 is a 14 in. Dia roof vent with a 19 in. x 19 in. square flange. Model PV-14-C1 will alleviate moisture in the winter and heat in the summer to extend the life of the roof and building structure. The Pop Vent roof louver product line has a manufactured one piece spun aluminum cap that is leak proof and corrosion resistant. It’s designed for superior exhausting performance. Its round covered vent cap has a lower louver section. This lower louver allows hot air to escape freely and efficiently, never trapping it up in the vent cap. The Pop Vent roof louver models have a built-in inner vertical louver cylinder to keep out birds, insects and animals that can clog the vent. The inner vertical louvers allow air to exhaust without resistance. The inner vertical louvers allow air to exhaust without resistance. Its round aerodynamic design can with stand harsh weather and wind forces up to 200 mph. The Pop Vent roof louver product line has proven to be the recommended choice for exhausting attic spaces.

  • Excellent choice to removing radiant heat from attic spaces
  • Helps to keep insulation dry in the winter
  • Mill finish aluminum will continually have a long lasting clean appearance
  • Ventilation rule 1:300, application per sq. ft.: 600
  • Net free air space: 144 sq. in.
  • Pitch capacity range: 3/12 to 12/12
  • 2 in. clearance between bottom of vent cap and flange
  • Inner cylinder louver design does not allow accumulation of particle build up as found in using an insect screen
  • Built-in inner vertical louver cylinder has a 1/8th in. opening between the louver blades and all aluminum (“noncombustible”) material meets the requirements of California building code 706A.2 vents to resist the intrusion of burning embers and flame through ventilation openings
  • Helps to reduce energy costs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Cut-Out Left to Right Length (in.) 
14 in 
Net-Free Area (Sq. In.) 
Product Depth (in.) 
Product Height (in.) 
Product Width (in.) 
Color Family 
Color/Finish Family 
Product Weight (lb.) 
2.5 lb 
Screen Included 
UV Resistant 
Vent Type 
Warranty / Certifications
Manufacturer Warranty 


Rated 5.0 out of 5 by 3 reviewers.
Rated 5.0 out of 5.0 by Sturdy construction, low profile This vent is very sleek and low profile. It looks like it will withstand all mother nature can throw at it. October 8, 2013
Rated 5.0 out of 5.0 by Does the job Vent was ready for pickup when promised. Did the job of reducing the heat frrom the upper level of the garage. July 21, 2015
Rated 5.0 out of 5.0 by works great bought 2 from company painted color I needed .these vents are easy to install and after a year no rain or pest problems. summer temp in attic is within 8-10 deg of outside temp. just be sure to do a complete attic job - all softie vents need to be clear or even better install baffles at $3 each. I installed 2 pop vents louvers put in 6 softie baffles and added more blow in insulation. the entire attic job was $375 and cant say enough about how much better my two story house holds temp. attic always has good air flow now. January 15, 2015
  • 2015-11-26 T12:14:26.666-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_202321470, prod, sort_default
1-3 of 3