Adjust-A-Gate 2-Rail Gate Frame Kit-AG 72 - The Home Depot


Model # AG 72

Internet # 202087300

Store SKU # 510899

2-Rail Gate Frame Kit

Adjust-A-Gate 2-Rail Gate Frame Kit

This item has been discontinued.
The Home Depot no longer carries this specific product.

$46.97 / each
  • Imagine your gate never giving you a problem
  • Never sags or drags
  • Adjustment to the truss cable over time is all that is needed


Model # AG 72

Internet # 202087300

Store SKU # 510899

Ask for the adjustable, Adjust-A-Gate system every time for your gate needs. This line is ideal for repairing an old gate or building a new one. Including all necessary hardware and parts, our gate is assembled onsite to get the job done right, the first time! The Adjust-A-Gate system comes with all the components needed to build a sturdy, reliable gate that will serve you for-years to come. You simply add rails and fence boards, you will have a gate for life. Accessories include an optional drop rod for double drive applications.

  • 2 rail kit, for use with wood or composite
  • For fences 4 ft. high or taller
  • A perfect solution for any gate need
  • Easy on site assembly, get it right the first time
  • Fits gate openings of 36 in. to 72 in., used for wood /composite gates 4 ft. high or taller
  • 2 step powder coated frame for long lasting protection and maximum life
  • Includes all hardware needed for assembly

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  2 in  Assembled Height (in.)  45 in 
Assembled Width (in.)  72 in 
Builders Hardware Product Type  Gate Hardware Kit  Fasteners included  Yes 
Finish  polyester powder coat over steel  Finish Family  Gray 
Material  Steel 
Warranty / Certifications
Manufacturer Warranty  1 year warranty against manufactures defects and workmanship 


Rated 3.3 out of 5 by 22 reviewers.
Rated 5 out of 5 by Sturdy, square gate. Good kit. I used this kit to built a gate on my new steel-post-supported fence. Because the kit is designed to be used on wood fence posts, I had to replace the post-side hinge half (male hinge) with one designed for metal posts. There was no issue with that. The hinges are common sizes. The final gate swings smoothly and has no apparent sag. I did drill holes in the spreader bars so I could insert a total of 7 screws into the top and bottom 2x4's. I don't fault the kit for this since there'd be no way to allow full adjustment for width otherwise. -1 on Quality rating for the wimpy wood screws. As other reviewers suggest, I recommend using 3-inch coated decking screws to mount the rails into the 2x4's. The gray ones match perfectly. Recommended. June 30, 2014
Rated 5 out of 5 by Worked great for me I bought and installed 2 of these kits to replace different size gates. I ended up using another reviewer's advice and used 3" decking screws. The provided 3" aluminum screws will twist apart. The small screws for the gate stop required tapping threads into the frame because they were too soft to self-thread. The kit is intended to open only inward and can be assembled with no gaps as otherwise mentioned. Any gaps in my gates were deliberate to balance the spacing. I just followed the instructions. Using stained cedar pickets this gate will never have any issues relating to weight. June 4, 2014
Rated 5 out of 5 by BUILD YOUR OWN GATE... It's very sturdy, easy to build, about 2 hours time with installation, no regrets...see photos below.... June 21, 2014
Rated 1 out of 5 by Not at all what I expected for $50 Supposed to be a quick and easy install...took a day of frustration and it still isn't right. The gate latch tongue isn't angled properly and doesn't latch correctly. The thread for the tek screws for the tongue strip instantly when you put them in and then don't hold the tongue in place at all! I had to go purchase new screws for this...In fact, all of the screws that come with it are cheap and strip easily. The instructions are confusing and unclear. For $50 I expected a better quality product. September 21, 2014
Rated 5 out of 5 by Turned old skis into a gate!!! I purchased this adjust-a-gate kit and love the way my gate turned out. I had a contractor rebuild a deck at my cabin using Trex decking. I needed to add a gate to the top of my stairs to keep my large dogs on the deck. However, I wanted to make it unique using old skis instead of wood pieces. The kit was easy to install and our only problem was because the Trex decking was not the same as wood regarding the installation of the large screws to hold up the gate. We needed to purchase other gate hinges that could be bolted to the Trex. Overall, I couldn't be happier. July 28, 2013
2 3 >>


Store Exclusive. This item is available for purchase in select stores only.