Free Shipping and BOPIS

Alsa Refinish

Model # KC-ASB-14

Internet # 204256533

12 oz. Stylin Basecoats Pure White Killer Cans Spray Paint

This item has been discontinued.
The Home Depot no longer carries this specific product.

$29.98 /each




Model # KC-ASB-14

Internet # 204256533

Alsa’s 12 oz. Stylin’ Base coats all purpose custom paint comes in a specially formulated spray can that delivers a fine, even spray. Our Killer cans have a high output with excellent atomization that eliminates pressure drop during application. This product can be used as a base coat for almost any application. It covers extremely well and usually only requires 1 to 2 coats. Alsa’s Pure White Base Coat is the recommended base coat for all Alsa Base Pearls paint. If you want to create an amazing white pearl, try applying Alsa’s Mystic Tropical Passion paint, part number KC-MYC-200 over our pure white. Alsa Stylin Base coats should be top coated with our high quality MirraClear, part number KC-MCLR for durability and a deep, water-wet gloss look.

  • Pure white
  • Standard finish/sheen is flat/matte
  • For high gloss; as seen in our photos, apply a top coat of alsa mirraclear (KC-MCLR)
  • High pigment level for superior coverage
  • Interior, exterior use
  • Dries in as little as 30 minutes, for fast, convenient use
  • 12 oz. can will cover approximately 10 sq. ft.
  • Automotive grade urethane
  • Water resistant
  • Can be applied to a wide variety of materials
  • Compatible with most primers and clear coats
  • 1 of the purest whites available
  • Rust resistant to protect metal surfaces
  • Advanced UV inhibitor to prevent color fading
  • High grade german aluminum pigment

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Container Size 
12 OZ-Ounce 
Coverage Area (sq. ft.) 
Application Method 
Coating Product Category 
Pure White 
Color Family 
Matte Finish, for High Gloss Use Alsa MirraClear 
Dry to touch (min.) 
Mildew Resistant 
Paint Product Type 
Automotive Paint 
Paint/Stain Base Material 
Paint/Stain Clean Up 
Paint Thinner 
Paint/Stain Key Features 
Mildew Resistant 
Paint/Stain/Waterproofer Product Type 
Automotive & Farm Equipment 
Warranty / Certifications
Manufacturer Warranty 
We warranty our product against defects for a period of one year. 


Rated 4.0 out of 5 by 2 reviewers.
Rated 4.0 out of 5.0 by Smooth Careful prep is the key to successful adherence and coverage of any paint. After stripping a metal pole of old paint and rust, I applied two thin coats of primer before applying Killer Can Basecoat. The Killer Can goes on smoothly, leaving a very nice base for the topcoat. I'm not convinced that the quality justifies the cost, but I must say that the initial coat of base will make for a nice finish. The design of the spray head is much nicer than the standard can of spray paint; no spatter, no pulsing of the spray. The Killer Can Basecoat reviewed here will be sanded with 1200 grit sandpaper, then Killer Can Pearl White will be applied, followed by Killer Can Clearcoat. February 25, 2014
Rated 4.0 out of 5.0 by Easy to use basecoat The basecoat is fairly easy to use compared to spray guns as you are ready to go without any mixing or filling and the messy cleanup afterwards. You will need atleast 3 coatings to get an even layer of color. Also if you have any painted surfaces adjacent be sure to cover it as the sovent in the basecoat tends to dissolve it. Recommended for a fresh job and not touch ups. February 22, 2014
  • 2015-10-12T12:19:25.111-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_204256533, prod, sort_default
1-2 of 2