Model # AMD0150MG

Internet #204399264

Amdry 1.89 in. x 2 ft. x 4 ft. Tile Insulated R7 Subfloor Panel


1.89 in. x 2 ft. x 4 ft. Tile Insulated R7 Subfloor Panel

$28.97 /each

Frequently Bought Together

Product Overview

Amdry Insulated Tile Subfloor panels are designed to offer a better, easier, quicker insulation system for any glue down flooring surface application like ceramic, porcelain, stone or marble tile surfaces ( always check with tile manufacturer on best adhesive choice for your specific product ); allowing the contractor/owner to utilize unfinished space with a modular panel that incorporating vapour barrier, insulation, and a water mold and mildew resistant subfloor surface finish; cost effective, quick and easy to install. Use in basement bathrooms, gyms or kitchens; garages or sheds; similarly with commercial, agricultural, retail store, and industrial applications. The Amdry panels are designed to include the highest quality surface materials, laminated to rigid EPS insulation, to provide a simple One Step quick, reliable and long lasting insulation solution. NO additional connectors are required with these panels; simply glue together with PL300 or similar foam approved adhesives.

  • Amdry saves time saves money saves energy
  • Amdry promotes better indoor air quality by providing a continuous thermal break across the entire concrete floor
  • Installs 50% faster than comparable tongue and groove subfloor panels
  • 10-Mil surface board is perfect for any glue down application including ceramic tiles, stone and vinyl flooring
  • Mold and mildew and water resistant
  • Panels can be floated by gluing the surface overlap edges on each tile with any foam approved adhesive or can be directly screwed down into the concrete subfloor

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Could this be used in a travel trailer? Also can it he cut to fit?

Asked by: Chelsea
Yes it can be used and cut using a carbide skills. Sawor jigsaw blade. My only question is what flooring surface you plan to use.? If you are using wood or carpet I would suggest the OSB version as it is more flexible and tough since a travel trailer has a lot of movement -shear and twist . Good luck HC
Answered by: Amdry Product Specialist
Date published: 2016-03-30

Is the surface board on these mgo board? Can I carpet over this?

Asked by: JimmyShmitz
Yes you can carpet over the Mag board but you will need to put a good quality underlay as the board surface us very hard. I do have one question. Why would you not go OSB when putting carpet on top ? These boards are designed for a tike surface.
Answered by: Amdry Product Specialist
Date published: 2017-01-27

Should Amdry tile go directly to the structure wall and stud on top of Amdry or stud and place Amdry snug to studs?

Asked by: Kurt
The Amdry Insulated subfloor panels should always go down first - making for one smooth contineous insulated and vapor barrier floor. All walls and partitions should be constructed once the full floor is in place. Please send us some before, during and aftre photos and your comments once complete Good Luck HC
Answered by: Amdry Product Specialist
Date published: 2016-03-11

amdry tile product

I asked the question below about tiling over this product and another product was recommended. What is the link to access this alternative product? Thank you.
Asked by: wpt11
Good Morning. My apologies. Your last note did not specify Tile or OSB. Our TILE product dies not require any prep or special covering. The Mag board is mortar ready and once panels are glued together they firm a solid floating water resistant platform. Only areas that should be anchored down are at te base of stairs - doorway thresholds and if you have a walkout the panels within 4 ft if the doorway as all these ares see significant traffic and transition strest. Please make sure all panels are fkat-level and there is no spongeeness. If any panels appear to move up and down simply tap on directly to the concrete with 1 or 2 screws 12 inch on center. Do not over torque screws simply snug up against the concrete pad. We recommend you use 1/2 or 3/4:grooved mortar trowel. Good luck Howard.
Answered by: Amdry Product Specialist
Date published: 2015-10-22
  • y_2017, m_4, d_24, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_, sid_204399264, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms

Customer Reviews

1.89 in. x 2 ft. x 4 ft. Tile Insulated R7 Subfloor Panel is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Good Product I installed this product in my basement bathroom along with the R7 wood panels in the rest of the basement. The issue I had with this product was how they connected. It is just hardy board over the top of Styrofoam. So screws are not going to do anything. Most of the boards were a little crowned so they did not sit completely flat on floor. I glued the panels to the floor as well as to each other with a Styrofoam approved adhesive. I also used a thin set that is suppose to flex to prevent cracking. I used mesh tape on the joints and lastly used an epoxy grout to make sure I didn't have any tiles pop or have grout crack. Very happy with the wood panels as well. Basement is much warmer.
Date published: 2015-08-14
Rated 5 out of 5 by from Easy to install. Great company! This product is the perfect solution for inorganic basement flooring - to avoid mould. It's resistant, durable and easy to install. Plus the manufacturer (Amvic) is excellent in customer service. They will go out of their way to help you.
Date published: 2016-07-07
  • y_2017, m_4, d_24, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_, sid_204399264, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms