Amdry 2.09 in. x 2 ft. x 4 ft. OSB Insulated R7 Subfloor Panel-AMD0150G - The Home Depot


Model # AMD0150G

Internet # 204395337

2.09 in. x 2 ft. x 4 ft. OSB Insulated R7 Subfloor Panel

Amdry 2.09 in. x 2 ft. x 4 ft. OSB Insulated R7 Subfloor Panel

This item has been discontinued.
The Home Depot no longer carries this specific product.

$21.99 / each


Model # AMD0150G

Internet # 204395337

Amdry Insulated OSB Subfloor panels are designed to offer a better,simpler insulation system; designed specifically for Carpet, laminate, engineered hardwood and hardwood flooring surfaces - virtually any screw down, nail down or floating floor-cover application. Panel incorporating vapour barrier, insulation, and an OSB subfloor finish; quick and easy to install. Applications include residential environments such as a basements or retro-fit garages;commercial environments, agricultural, retail store and industrial applications. The Amdry panels are designed to include the highest quality surface materials, laminated to rigid EPS insulation, to provide a simple One Step quick, reliable and long lasting insulation solution. Note- This product is a 2 part system- You will be required to purchase seperatelly- Bags of 15 Flex Connectors - (1 bag will connect 10 full tiles) Amvic SKU # AMDC0104

  • Amdry saves time saves money saves energy, amdry helps achieve warmer, drier, more energy efficient basements
  • Amdry promotes better indoor air quality by providing a continuous thermal break across the entire concrete floor
  • A combination of deep drainage and ventilation channels allows moisture and air to move freely promoting surface drying; reducing the potential for mold, mildew and odors
  • Installs 40% faster than comparable tongue and groove subfloor panels
  • 5/8 in. OSB is perfect for carpet, engineered wood and hardwood or laminated, virtually any glue down screw down or floating flooring surface
  • Panel must be paired with amdry flex connector model number: 204399253 - insulated subfloor panel OSB flex connector

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  48 in  Assembled Height (in.)  2.09 in 
Assembled Width (in.)  24 in 
Plywood Type  OSB/Waferboard  Returnable  90-Day 
Warranty / Certifications
Manufacturer Warranty  Amvic Inc. offers a limited 25 year warranty on all our Amdry family of products. We warrant to the Qualified Owner (as defined below) that our Amdry subfloor panels (the “Product”) will be free from manufacturing defects in materials and workmanship. 1877.470.9991 


Rated 4.2 out of 5 by 6 reviewers.
Rated 4.0 out of 5.0 by Easy to use, saved me time Got this product from the store in St Clair. I used drycore in my older house and decided to try this one for my new basement reno. Installation time was faster. Insulation already include. Make sure you do your measurements correct I miss calculated and got extra panels. July 30, 2013
Rated 2.0 out of 5.0 by Terrible Quality Control Very disappointed in this product. I bought it to use in my garage under a safe. First the vapor barrier didn't completely cover the bottom of the panels. There was mutliple places where the vapor barrier was missing or peeling off. So much for water proof claims made by the company. Second, I called and spoke to a product rep because I wanted to know the weight load specs. He stated it was 1400 psi. This product is a peice of 1 1/2 inch strofoam glued to a 1/2 inch OSB with thin vapor barrier on the bottom. I have serious doubts that this is going to support my 1500 pound safe. I am going to screw and glue a 3/4 inch sheet of plywood to the top for added strength but I can't believe the strofoam won't be crushed under that much weight. I sure expected the subfloor insulation to use a more dense and sturdy insulation. Home Depot did offer to replace the panels but I start building in two days and it took two weeks to get this delivery. I was given a 10% discount which covers the cost of some sealer for the bottom. January 30, 2015
Rated 4.0 out of 5.0 by Very easy to work with The product is easy to install and cut and connect together. It does pose an issue with the height of the product. Be careful around your basement stairs, it lessens the height of the last step about 2 inches, our building code requires equal height between each step and we failed our final inspection. We had to remove the flooring from around the stairs. Over all great product, insulates the basement floor well and very easy to install and cut. It is a bit pricey though. Make sure your basement ceiling is of adequate height including box ins before you install, you lose about 2.5 inches of floor the ceiling height. November 5, 2013
Rated 5.0 out of 5.0 by Very Stable and Easy Sub Floor I ordered 40 sheets and connectors and they were delivered on a pallet and the delivery service guy helped get them down our driveway and into our garage. This was a real work saver. I installed the floor with the help of a plan I made to make sure the edges did not end up with small sections that would be unstable. The pieces cut easily (but cut them outside since the foam pieces are a pain to clean up - like those annoying Styrofoam peanuts) and then connected them with the plastic connectors very easily. i would consider this a moderate DIY project, but with some common sense, any handy person (WITH THE RIGHT TOOLS) should be able to handle it. The biggest issue for me was that my basement floor was not flat and level as I would have liked, although I had a fresh layer of re-enforced concrete poured before I installed the floor. once installed, I used very long (4") concrete screws, one for each section, to stabilize the floor. The hard part was drilling into the concrete with the floor in place. i needed very long concrete drill bit and a hammer drill. I then had carpeting installed (tackless, not glued - so it could be removed and a wood or other floor could be installed in the future). All in all, i love the ease of the system as compared to the 2x4's and plywood solution that sub floors are usually made from. My basement is dry, but even if some dampness is present, the construction of the panels allows for breathing and the anti-mold treatment on the plastic gives me peace of mind that mold won't form underneath. At least not in my basement. January 13, 2015
Rated 5.0 out of 5.0 by First time installing it... Excellent product I normally work with other subfloor panels. I used amdry by the home owners request. Excellent product to work with. Fast installation. Definitely will recommend it to my clients. February 21, 2014
2 >>


Standard Shipping includes delivery by small parcel service. Orders for this item may be expedited for an additional fee.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.