Rated 4.0 out of 5 by 16
Rated 4.0 out of 5.0 by robert works well
works well good for maple seeds and all leaves. easy to install
July 30, 2013
Rated 2.0 out of 5.0 by jim Lots of rain runs over the edge
The holes are so small that the surface tension of the drops stops them from flowing through. In a light rain, almost all of the rain ran right over the surface of the guard, over the edge of the gutter and dripped right onto the ground. I pulled off the one closest to the downspout and there was very little water actually getting into the gutter. I'll try to return these.
July 3, 2015
Rated 5.0 out of 5.0 by jjj123 Gutter Guard
it is a great product that will keep our gutters clean while allowing the water to flow freely...it arrived on time, not expensive and good quality
June 2, 2015
Rated 1.0 out of 5.0 by mcs1 Difficult to install, do not work well
Hard to install on existing gutters. Requires cutting and bending. Does not collect all the water. Water runs over the ledge and onto the ground. Expensive as well. I bought 4 to test, installed 2, which don't work very well, others sitting in garage. - Oh well, I tried it.
November 11, 2014
Rated 3.0 out of 5.0 by Fran Good product but installation can be difficult.
This gutter guard performs well in a light or moderate rain, and fair in a heavy rain. Installation could be relatively simple under ideal conditions, but that was not my experience. Since gutters are not always perfectly straight, the guards will pop out of their groove, and therefore need to be secured with screws - not an easy task 20 feet up on a ladder. Corners require cutting, etc.
May 29, 2014
Rated 5.0 out of 5.0 by BusyB Great Product
Product is a bit pricey but is well made and easy to install. I didn't need to cut it so I can't comment on how difficult cutting the steel would be. Has handled very heavy rain with no problem.
July 17, 2014
Rated 5.0 out of 5.0 by canzim Works well; installs moderately easily
I installed this gutter guard on a single story ranch style house situated under 10 very tall leafy trees (maples and tulip poplars). Prior to installation of this product I was up on a ladder at least four times a year clearing the gutters of leaves, maple keys and what have you. Now that it has been up almost three years, I have checked to see if it has moved (it hasn't) and that it is clear enough to drain away water (it is). Now I don't have any reason to climb a ladder to clear gutters.
The installation was moderately easy (I did it with help from my brother) once we figured out how to do the corners. These weren't difficult but they do take some effort to get right. We did use rivets in places to hold the guard in place (corners and short pieces) if we thought that it might shift. We used fewer than 100 rivets over a 300 foot installation. These may not have been necessary but I wasn't willing to go back up later. Also to note, we ended up with very little scrap because we were careful.
Lastly, the only tools we needed were a ladder, tin snips, a jig saw with metal cutting blade, tape measure, drill and rivet gun and rivets, permanent marker, safety glasses, and really tough gloves. You might need additional tools and safety equipment depending on your installation
I am very pleased with this product.
June 3, 2014
Rated 4.0 out of 5.0 by Greg54 Expensive, but good quality
This is an expensive option as far as gutter guards go, but still cheaper as a a do-it-yourself project than payng a gutter company for a lower quality solution. Installation was fairly easy. Cutting for corners was a little challenging - I ended up using a grinder to cut through the thickest part and then tin snips for the rest.
August 13, 2013