Rated 3.9 out of 5 by 11
Rated 5.0 out of 5.0 by Cook Exactly what was needed
The project was to install a rain gutter that emptied into a rain barrel in our small garden. We have a 10 x 12 shed on one side of the garden and put the rain gutter on the garden side. We selected the vinyl rain gutter because it was light weight (compared to metal). Before starting I watched an excellent YouTube video on installing vinyl rain gutters a couple times which made it easy to install the gutter. It was a couple weeks after installing the rain gutter before it rained but when it did the gutter worked perfectly filling the rain barrel.
October 2, 2013
Rated 3.0 out of 5.0 by lassoatrain Huh?
it really is a good product and not that difficult to figure out ,that is if you don't read the instructions, the instructions are really confusing and will leave you scratching your head and wondering why you ever started this project, so first thing you do is throw them away.
December 9, 2014
Rated 4.0 out of 5.0 by Grumpy56 Works well - But too expensive!
Less than $5 for 10' of vinyl gutter, but these are $2.45 each?
The recommendation is a minimum of 1 of these for every 2' of gutter, which equates to a minimum of 5 of these for a 10' gutter - that's at least $12.25! No wonder the gutter is so little...
Other than that, it worked very well. I put one of these on each end of the span, then ran a level line the entire length, and used it to place the brackets along the whole run. After that, it was just a matter of running the gutter through the brackets.
There is only one hole drilled in the bracket for a screw, however I recommend a second screw about 2" below the first (good place for it), to help hold the bracket in place and level.
October 24, 2010
Rated 4.0 out of 5.0 by DIYinUT clips are ok
I bought about 30 of these to redo my raingutters on my house. I have only 1 caution to anybody that buys these. turn down the torque settings on your drill to around 10-12 if not you will crack these clips.
the only other down side is that you can only add these clips with the rain gutter removed you cannot add clips later on so make sure you plan ahead.
April 27, 2011
Rated 1.0 out of 5.0 by tb1010 Plastic clips
The construction of these clips are very poor. I cracked several installing a 40' run. You must turn down the torq on your drill to the minimum setting, this causes the gutters to have a loose fit against the facia. I don't think they will hold up 1 season. Today, down they come. will be returning whats left and getting a solid metal clip for a lot less money. Nothing like doing a job twice.
July 29, 2014
Rated 4.0 out of 5.0 by dadkind Tricky on non-vertical fascia
I installed about 60' of these gutters over the weekend.
My fascia is not vertical, it slopes in toward the wall a bit.
But I wanted the back and front of the gutters to be level, so I had to screw in these hooks such that they are not flush up against the fascia.
I was hoping to find some kind of shim or spacer for these hooks, but I can't seem to locate them on this website.
August 29, 2011
Rated 4.0 out of 5.0 by RednexToyz Installs easily
Product worked well. Installs easily with 1, #8 screw (length of your choice). Pre-drilled for easy screw or nail installation. I found that these had to be installed in the gutter before the gutter was put in place so adding an extra hangar after the others are installed was out of the question. That's my only complaint about the product. Follow the instructions on the spacing. They have molded in attachments on the top of gutter guards. Good product.
April 10, 2014
Rated 4.0 out of 5.0 by woody Product worked as expected.....lots to say about that!
Hangers were easy to use. Just remember to put all your hangers on the gutter before you start hanging it. Hangers are designed to install when on the gutter.
May 6, 2014