Rated 3.9 out of 5 by 14
Rated 4.0 out of 5.0 by Human So far so good
I like them a lot. Easy to use and hidden. I hope they last along time.
June 26, 2016
Rated 3.0 out of 5.0 by GA Fuctional, expesive, no screw
Previously reported as expensive at $2.45 - now it's $2.92 a piece. Now add 12 cents per hanger for a screw (no these don't come with one). At $3.03 every 18 inches (we get lots of snow) you need 7 or 8 hangers per 10 foot run. That's (at 7 hangers per 10 foot run) $21.21. Cost per linear foot with gutter itself included is around $2.50 per foot EXCLUDING corners, end caps, down spout, joiners etc. NOT AN INEXPENSIVE DIY Option.
May 28, 2016
Rated 5.0 out of 5.0 by RetiredGeek Exactly what was needed
The project was to install a rain gutter that emptied into a rain barrel in our small garden. We have a 10 x 12 shed on one side of the garden and put the rain gutter on the garden side. We selected the vinyl rain gutter because it was light weight (compared to metal). Before starting I watched an excellent YouTube video on installing vinyl rain gutters a couple times which made it easy to install the gutter. It was a couple weeks after installing the rain gutter before it rained but when it did the gutter worked perfectly filling the rain barrel.
October 2, 2013
Rated 3.0 out of 5.0 by lassoatrain Huh?
it really is a good product and not that difficult to figure out ,that is if you don't read the instructions, the instructions are really confusing and will leave you scratching your head and wondering why you ever started this project, so first thing you do is throw them away.
December 9, 2014
Rated 5.0 out of 5.0 by OldGuy101 They Work
Excellent product but space them closer than recommended in snowy regions - 1 foot apart!
July 28, 2015
Rated 4.0 out of 5.0 by Rick Works well - But too expensive!
Less than $5 for 10' of vinyl gutter, but these are $2.45 each?
The recommendation is a minimum of 1 of these for every 2' of gutter, which equates to a minimum of 5 of these for a 10' gutter - that's at least $12.25! No wonder the gutter is so little...
Other than that, it worked very well. I put one of these on each end of the span, then ran a level line the entire length, and used it to place the brackets along the whole run. After that, it was just a matter of running the gutter through the brackets.
There is only one hole drilled in the bracket for a screw, however I recommend a second screw about 2" below the first (good place for it), to help hold the bracket in place and level.
October 24, 2010
Rated 4.0 out of 5.0 by RednexToyz Installs easily
Product worked well. Installs easily with 1, #8 screw (length of your choice). Pre-drilled for easy screw or nail installation. I found that these had to be installed in the gutter before the gutter was put in place so adding an extra hangar after the others are installed was out of the question. That's my only complaint about the product. Follow the instructions on the spacing. They have molded in attachments on the top of gutter guards. Good product.
April 10, 2014
Rated 1.0 out of 5.0 by tb1010 Plastic clips
The construction of these clips are very poor. I cracked several installing a 40' run. You must turn down the torq on your drill to the minimum setting, this causes the gutters to have a loose fit against the facia. I don't think they will hold up 1 season. Today, down they come. will be returning whats left and getting a solid metal clip for a lot less money. Nothing like doing a job twice.
July 29, 2014