Model # CLOSERBL

Internet #202345830

Andersen Storm Door Black Bump Closer Kit
0034778356045

Andersen

Storm Door Black Bump Closer Kit

$39.13 /each

Frequently Bought Together

Product Overview

This 2-closer kit allows you to replace your existing push-button and/or standard closer on the styles noted below. The kit includes both a push-button and a standard closer. To ensure your closer matches the existing mounting holes in your door for the door bracket, use the replacement closer that matches the existing closer.

  • Andersen supplied replacement part
  • Fits most emco and andersen storm doors
  • Black finish
  • 1 Push-button closer for hands-free door stay, and 1 standard closer
  • Kit includes mounting brackets
  • Closers have adjustable closing speed

Specifications

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

I put Anderson storm in,then put both cylinders in,bottom cylinder doesn't open up very far.door ...

I put Anderson storm in,then put both cylinders in,bottom cylinder doesn't open up very far.door should open up wider.does it have an adjustment on cylinder so the door can open wider.
Asked by: Jaxon77
Thank you for your question. The typical opening range of a storm door with a closer preload of 1/4” and installed on a standard entry door system can be 80 to 90 degrees. The opening range can vary slightly depending on various factors. You can check this link for the information, https://ems02067.egain.net/system/selfservice.controller?CONFIGURATION=1048&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=28312 . You can also contact the Andersen Storm Door Solution Center at 855-337-8822 from 8:00AM to 5:00PM CST on weekdays and 9:00AM to 3:00PM CST during Saturdays and Sundays, for assistance about your door. - Noel
Answered by: Andersen
Date published: 2016-12-30

Can you install this closer on bottom or middle of door with closer on button on top!

Asked by: Yvonne
Thank you for posting your question. The push button closer should be installed at the bottom part of the door. Depending on the model of your door, it may have one or two closers. The closers must be installed on the location as indicated in the door installation manual. - Noel
Answered by: Andersen
Date published: 2016-07-24

My push button closer is stuck in open position

I tried for two days pushing and pulling to unstick the pusher. It's brand new and seem to be broken, is there some way I can get it working???
Asked by: hollywudz
Yes, there are steps you can take to correct this. We recommend that you remove the push button closure from the door by pulling out the pins on each end. Then remove the adjustment screw from the end of the closer. Once that is done, while holding on to the closure cylinder firmly with one hand, insert a screw driver into the hole in the end of the rod and pull the rod back as far as you can and pause for a moment before releasing. If you pull the rod back to quickly, you will not give the rod locking mechanism enough time release and it may stay in the locked position. When the push button is depressed on the closure the door will automatically lock into the position it is opened too. Under normal operation, you need to make sure that the push button was not accidentally push in. If you need further assistance,please call our Customer Contact Center at 800-933-3626 and one of our agents will be happy to assist you.
Answered by: Andersen
Date published: 2016-08-14
  • y_2017, m_3, d_29, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_202345830, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms
  • QUESTIONS, PRODUCT

Customer Reviews

Storm Door Black Bump Closer Kit is rated 4.0 out of 5 by 6.
Rated 5 out of 5 by from Storm door closer The only problem I had was I needed the sand color but black worked just as well. No one noticed the difference
Date published: 2016-08-09
Rated 1 out of 5 by from Poor quality. The original hardware on my ($600) storm door broke and I ordered this hardware as a replacement. This product is the second one I have ordered and both have been defective. I will try for a third time, as I have no alternative. I hope that the third order is the charm.
Date published: 2012-05-22
Rated 5 out of 5 by from Quick Fix! LOL! Once I read the directions, installation became easy! It appeared to be the same brand as the one on my door that had broken. It was much cheaper than a new door! And so easy to adjust. It is nice to not have the slamming door anymore! I love having items shipped to the store and avoiding the freight charge!
Date published: 2014-08-26
Rated 4 out of 5 by from Door closure It was an older model and difficult to find. Home Depot worker researched and found it. He was great
Date published: 2016-03-22
Rated 4 out of 5 by from Working well- original had locked up after about 8 years of use The product arrived when it was expected to. Ordered online- went well overall.
Date published: 2014-01-24
Rated 5 out of 5 by from Door closer kit Excellent service!! Received it very fast and we live in the boondocks. Great price too.
Date published: 2011-09-20
  • y_2017, m_3, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_, sid_202345830, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 108ms
  • REVIEWS, PRODUCT