Model # KIT01941

Internet #202322448

Arietta 6 in. Chimney Extension Kit for Lazio 30 in. Wall Mount Range Hoods

Arietta

6 in. Chimney Extension Kit for Lazio 30 in. Wall Mount Range Hoods

$6995 /each

Product Overview

The 6 in. Chimney Extension Kit for the Lazio 30 in. range hood, allows you to install the hood where vertical/exposed ducting needs to be covered or hidden. The grade of stainless is identical, which ensures a match to the original hood. Arietta offers flexibility with 6 in. and 12 in. tall extensions that are stackable and easy to install.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The 6 in. Chimney Extension Kit for the Lazio 30 in. range hood, allows you to install the hood where vertical/exposed ducting needs to be covered or hidden. The grade of stainless is identical, which ensures a match to the original hood. Arietta offers flexibility with 6 in. and 12 in. tall extensions that are stackable and easy to install.
  • Easy fit / stackable 6 in. and 12 in. duct covers allow you to reach desired heights without excessive trimming and waste
  • Stainless grade is identical to range hood
  • One (1) Year Parts and Labor Warranty - Arietta will provide all labor and in-home service to replace any defective parts
  • For use with Lazio 30 in. wall mount range hoods

Product Overview

The 6 in. Chimney Extension Kit for the Lazio 30 in. range hood, allows you to install the hood where vertical/exposed ducting needs to be covered or hidden. The grade of stainless is identical, which ensures a match to the original hood. Arietta offers flexibility with 6 in. and 12 in. tall extensions that are stackable and easy to install.

  • Easy fit / stackable 6 in. and 12 in. duct covers allow you to reach desired heights without excessive trimming and waste
  • Stainless grade is identical to range hood
  • One (1) Year Parts and Labor Warranty - Arietta will provide all labor and in-home service to replace any defective parts
  • For use with Lazio 30 in. wall mount range hoods

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
12
Product Height (in.)
6
Product Width (in.)
30

Details

Appliance Type
Part/Accessory
Brand Compatibility
Arietta
Compatible Appliance Type
Range Hood
Hardware Included
Yes
Part Type
Extension
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
One (1) Year Parts and Labor Warranty - Arietta will provide all Labor and In-Home Service to replace any defective parts.

Specifications

Dimensions

Product Depth (in.)
12
Product Height (in.)
6
Product Width (in.)
30

Details

Appliance Type
Part/Accessory
Brand Compatibility
Arietta
Compatible Appliance Type
Range Hood
Hardware Included
Yes
Part Type
Extension
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
One (1) Year Parts and Labor Warranty - Arietta will provide all Labor and In-Home Service to replace any defective parts.

More Products With These Features

Search

Questions & Answers

Will this work with a Viking 30" vent hood? 6" chimney would be perfect. Dimensions I need: 29 7/...

Will this work with a Viking 30" vent hood? 6" chimney would be perfect. Dimensions I need: 29 7/8"W x 6"T x 12"D Thanks!
Asked by: Lyndon
Hello I think it could work. Those dimensions match very closely. Actually, we are now making some of Viking's hoods but not this particular model yet. I don't recall what type of stainless steel Viking uses. I know the gauge is slightly thicker on that hood but on a duct cover this won't matter at all. Elica / Arietta use type 430 stainless which matches most other appliances used in the kitchen. I suspect they are using the same but if it was different, the color could likely be different and unacceptable to you. I am assuming this is an indoor hood...correct?....not outdoor. Not sure if the screw holes on the Lazio duct covers will match up to anything Viking has in the top of their hood. If not, I suspect you could improvise. I doubt drilling some extra holes in the top of the hood will hurt anything. There shouldn't be anything of importance on the extreme edges. Regards,
Answered by: Matt Holmes
Date published: 2016-12-10

Will this work to extend venting at an angle? (I want my range about 3" off direct center of current vent. Ceiling is also 3" higher than ideal. 8'3

Asked by: Kim
Hello, Yes, this will work well. The duct cover KIT is the width of the hood, so it will hide the shift off center completely. However, you may need the 12" tall x 30" wide Kit....instead of the 6". I say that because you have a transition coming out the top. This hood comes with a 3 1/2" x 10" rectangular transition, which is at least a couple inches tall. Are you using rectangular ducting all the way to the outside? Or are you going with round ducting (such as 6" round). If you are using round ducting, you will need to install a reducer connector to take you from rectangular to round. This will add several inches on top of the rectangular transition....maybe 6"-8. Then you need to attached the ducting and make the small shift off center which will take some inches. Bottom line, 6" may not be enough space. May need 12". Hope this helps. Regards,
Answered by: Matt Holmes
Date published: 2016-10-11
  • y_2017, m_9, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202322448, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 99ms
  • QUESTIONS, PRODUCT

Customer Reviews

6 in. Chimney Extension Kit for Lazio 30 in. Wall Mount Range Hoods is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Perfect Fit The extention we ordered for our range hood was a perfect fit and match. It was shipped quickly and arrived very well protected. The only issue is when we tried to attach it to the range hood, the screws that were included would not work, they don't actually attach to anything. We went ahead and attched it with a rivet gun we own and that worked well. If someone else orders this product they will need to find another way to attach it to the hood.
Date published: 2011-01-23
  • y_2017, m_9, d_20, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_, sid_202322448, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 106ms
  • REVIEWS, PRODUCT