Rated 4.1 out of 5 by 119
Rated 5.0 out of 5.0 by Ski 10 in. x 200-Tooth OSB/Plywood Saw Blade
The saw blade did and excellent job of cutting very thin plywood. the edges of the cuts were very smooth and no splintering.
September 29, 2015
Rated 4.0 out of 5.0 by GeorgeR Good value for what it is
Look at the facts. This is a 10" saw blade for around $10. It does not perform like a $50+ blade, and I wouldn't expect it to. I used it to cut cellular shades to width (plastic rails and fabric shade material). The high tooth count left a nice finish for that application. The job is done, it's off the saw, and it will stay on my shelf until I have another project that needs this special type of cut. This is NOT an everyday general purpose blade, and contrary to the product description I would not recommend to use it in a table saw to rip most plywood or OSB. It is a great value for occasionally cutting things like thin or extruded plastics, or maybe up to 1/4" plywood.
August 13, 2011
Rated 4.0 out of 5.0 by IrishAce Mostly good
Used this blade to cut and grove melamine boards. It quickly started to burn the wood and smoke when cutting. I also used it to cut acrylic plastic pieces, which worked just fine.
I returned to Home Depot to discuss the issue with them. They recommended this blade actually be used for much thinner pieces of wood, like panelling, since there were several small teeth. The recommended blade for cutting hardwoods, like MDF, melamine & red oak, is a fine cut 60 tooth blade.
I ended up buying the DeWalt 60 tooth blade for cutting my melamine & red oak - which works perfectly.
This blade still works great for cutting the acrylic plasitc sheets.
March 20, 2010
Rated 4.0 out of 5.0 by MikeAWBD Great blade for the price.
I bought this blade to cut a bunch of plywood to build shelving for a closet. The cut was very smooth with almost no chipping. The blade did get dull towards the end of my project. When it got dull it still did fairly well with chipping, but the cuts took much longer and taxed the saw motor more. It's a good blade for cutting a plywood if it's for one moderately sized project or just occasional use, especially if money is an issue. If you need to make a lot of cuts you should probably spend a little more on a carbide tipped blade that will last longer and can be sharpened. Overall I thought it was an excellent value for the price
March 4, 2015
Rated 4.0 out of 5.0 by dag93 Best tool for the job
The perfect tool for the job for cutting laminate flooring, nice smooth cut and no burning on edge.
September 2, 2015
Rated 4.0 out of 5.0 by DaughterplaysLacrosse This is for THIN material.....
This is a blade that costs under 10 bucks. It's 200 teeth say "Thin Stuff". Plexiglass, thin plywood, paneling. That's what it should be used for. I used it to cut stips of .220 plexiglass. worked fine just let it cool off after a few cuts.
July 14, 2014
Rated 2.0 out of 5.0 by bayernboy Dulled too quickly
Used this blade to cut Melamine boards for a pantry project. Dulled after the fourth board. Bought a Diablo blade instead...cut like butter.
April 28, 2015
Rated 4.0 out of 5.0 by DaveJB Good blade for light duty plywood cutting
Good blade for light duty plywood cutting. A good value if you have a small project with a limited number of cuts.
If you are starting a big job I would recommend a higher quality blade that will stay sharp for a larger number of cuts.
February 12, 2013