Model # A05518X

Internet #202021699

Store SKU #429503

Avanti 5-1/2 in. x 18-Tooth Fast Finish Saw Blade
0008925083986

Avanti

5-1/2 in. x 18-Tooth Fast Finish Saw Blade

  • Carbide tipped saw blade
  • Can be sharpened for longer life
  • Recommended for DIY projects and construction use
$997 /each

Choose Your Options

Saw Blade Diameter (in)
5-1/2
Number of Teeth
18

Frequently Bought Together

Product Overview

The Avanti 5-1/2 in. x 18 Tooth Fast-Finish Circular Saw Blade is an economical, high-performance blade that's recommended for hardwood, softwood and plywood. The high-quality steel is manufactured with carbide and lasts up to 30 times longer than regular steel blades. It can be sharpened when needed to extend its service life.

  • Replacement blade for circular saws, ideal for DIY projects and construction use
  • Recommended for hardwood, softwood and plywood
  • Made of high-quality steel with carbide reinforcement for toughness and durability
  • Economical yet high performance, can be sharpened to extend life

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Can I use it to cut a metal stud

Asked by: Judy
No, you need to purchase a blade that is specialized for metal cutting,
Answered by: DIY
Date published: 2017-05-23

Will this cut melamine without chipping?

Will this cut melamine without chipping?
Asked by: Ahlluu
It will if you place the item being cut between sheets of 1/4" plywood.....
Answered by: DIY
Date published: 2017-05-23

What's the arbor size

Asked by: rick
Arbor size for this blade is 10 mm, (shown on picture just above the arbor hole) fit my 18v cordless ryobi skilsaw. back of package has table of blade size / saw brand / arbor size to double check if you have right one for your particular saw. 10mm is "approximately" 3/8" = 9.525mm
Answered by: spartus969
Date published: 2017-05-16

can not find blades for a old sears compact circular saw

will avanti blades fit my 5 1/2 old sears compact circular saw with a 1/2 arbor ?
Asked by: dale
Yes but don't buy them the blade warps and cuts crooked I have a Skill saw 51/2 inch go online and buy oldlam I believe the name is they make a blade to fit and they work great
Answered by: Happytoolguy
Date published: 2017-03-29
  • y_2017, m_5, d_25, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_, sid_202021699, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 193ms
  • QUESTIONS, PRODUCT

Customer Reviews

5-1/2 in. x 18-Tooth Fast Finish Saw Blade is rated 4.1 out of 5 by 225.
Rated 5 out of 5 by from used this blade on a Ryobi cordless 18V skilsaw to cut 1/8" thick 4'x8' sheets of wainscot panel ... used this blade on a Ryobi cordless 18V skilsaw to cut 1/8" thick 4'x8' sheets of wainscot panel board, zipped right thru no problems. do be careful of which side is facing up during cutting as cutting with finish side up can result in chipping of paint, cutting finish side down left a clean cut on finish face without chipping the coating,
Date published: 2017-03-22
Rated 1 out of 5 by from Warped immediately I had bought this blade to cut .75" thick sheets of OSB. Blade cut through the first few inches of length, but then wouldn't stay straight. After the first couple of cuts it started bogging down my saw and burning the edges of my stock. I inspect metal for a living and am sure this is made of an inferior material to be dulling and warping so quickly on cutting what it is advertised to do.
Date published: 2017-01-02
Rated 3 out of 5 by from The two I bought were replacements for dulled blades. For the price I paid it is about what is e... The two I bought were replacements for dulled blades. For the price I paid it is about what is expected. I bought two because of the amount of paneling I still have to cut and the amount of cuts I did on the first blade, told me that I should get two. 1/4 inch hardboard paneling is all that was cut. 7-8ft rips and a couple of 2ft lengths until the blade was starting to slow down and burn. I would recommend if you can't afford a $30, 80 tooth carbide blade.
Date published: 2017-02-14
Rated 5 out of 5 by from Used it to cut down a hollow core wood bifold door, worked well with very little damage to the ba... Used it to cut down a hollow core wood bifold door, worked well with very little damage to the back side of the door.
Date published: 2017-01-10
Rated 5 out of 5 by from This saw blade was used to cut Corian countertops. It was precise and cut very easily. It met my... This saw blade was used to cut Corian countertops. It was precise and cut very easily. It met my expectations.
Date published: 2017-01-31
Rated 2 out of 5 by from gets hot, even with 3/4 pine wood... gets hot, even with 3/4 pine wood
Date published: 2017-01-24
Rated 4 out of 5 by from Overall the blade worked well. I used it for ripping multi-length, 1/8" thick pieces of salvaged... Overall the blade worked well. I used it for ripping multi-length, 1/8" thick pieces of salvaged barn wood with my cordless circular saw. It cut all of the boards without splintering, burning or binding. I'm giving it 4 out of 5 stars because I didn't use it enough to see how long it would hold up. For what I needed, it was a solid performer.
Date published: 2016-12-19
Rated 5 out of 5 by from I was visiting my mom and we picked up a new saw to complete a project, but I knew we'd need an e... I was visiting my mom and we picked up a new saw to complete a project, but I knew we'd need an extra blade to cut the wood we were working with. The blade that came with the saw was fine, but had giant teeth, and we needed something to provide a finer cut on delicate trim pieces. This was perfect! Mother/daughter DIYing complete :)
Date published: 2017-03-28
  • y_2017, m_5, d_25, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_225
  • loc_, sid_202021699, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 107ms
  • REVIEWS, PRODUCT