Rated 4.4 out of 5 by 38
Rated 5.0 out of 5.0 by bc1972 Great blade
bought this blade for some wood shelving, it performed beautifully. I then had a need to cut some 1/4" Plexiglas, I had my doubts it would work, but after experimenting a bit I found it cut the Plexiglas smoothly, requiring little touch up. So far the blade remains sharp. (of course the blade is not designed for Plexiglas so would not recommend anyone try this, especially if the Plexiglas is thinner than 1/4")
May 10, 2016
Rated 4.0 out of 5.0 by peted Good Basic In stock 10 " blade
A cheap 24 teeth 10" blade was kicking back too often when ripping pine on my saw table, leaving a nasty finish but mainly it scared me. My older 7" 42 tooth wouldn't cut right through a 2 x 4 when on the sledge. This 60 tooth one doesn't kick back (yet) and the resulting finished cut is better. I'm a very light user so I don't know how durable it will be. Only time will tell.
February 23, 2016
Rated 5.0 out of 5.0 by Verified Reviewer Good blade.. good price
This blade looks to be better than most with in this price range. The materials I am cutting are hard on saw blades, even the more expensive ones. This blade cuts well, clean and seems to be holding up to the abuse (Maple, bamboo, laminate flooring) better than the last three brands of blades I have used. Possibly the best blade I have had in this saw.
I will put one in my table saw as well.. again, great CLEAN cuts.
I will purchase these again from Home Depot and will recommend them to my friends.
March 19, 2013
Rated 5.0 out of 5.0 by je1coxnet SawBlade from Heaven
Perfect Multi-use Blade yet durable and sharp enough to make a very nice cut. Beit ripping or cross-cutting, this blade is awesome. For the price, it can't be beat.
December 8, 2015
Rated 5.0 out of 5.0 by Lezm001 Worked great, cut like a knife through butter
Used to cut composite deck railing and worked great.
July 14, 2015
Rated 5.0 out of 5.0 by surv8r Great Cutting
I use this blade for cutting engineered wood flooring and trim. I actually have 2..., one on table saw, and one on the miter saw. Nice clean cuts. No splinters.
March 17, 2015
Rated 5.0 out of 5.0 by scive 10 in x60 tooth finish saw blade
very easy to use ,light weight and very comfortable was very easy to install,highly recommendable
February 25, 2015
Rated 4.0 out of 5.0 by Zero99999 Great blade for MDF!
Very clean cut on MDF and Pine (When blade is new).. I have 4 of these, 2-2 in one packages, Had them for a year and cleaned them 3 times each to a shiny finish, Now they will not even rip through 1.5" pine! They burn the wood so bad it looks like walnut.. they feel sharp, Look almost new after the cleaning which was done with simple green and a toothbrush. I have to slow down the feed to 1" per 3 seconds! Table saw has plenty of power, I guess these are not meant to last to to long compaired to Freud or Forest blades. I would and will spend another $15 and get a Freud..
October 10, 2012