Rated 4.3 out of 5 by 24
Rated 5.0 out of 5.0 by Newpatioguy Bought this blade and used it to cut and grind cement pavers and retaining wall stone. It cuts fast and clean. I've made almost 100 cuts about 4"-6" long and it's still cutting well. It is showing wear now and I'll probably get another soon. Since it is not large enough to cut all the way through my 2 3/8" pavers, I have to break the stone. Then, it's great grinding on the side of the blade! (I'm using the tool that I have on hand... suppose one should have a larger tool and blade, then one wouldn't have to do this grinding...) I just wish this 4" blade came with a 3/8" arbor (or adapter). I had to fashion washers to make it fit my tool.
October 27, 2016
Rated 5.0 out of 5.0 by GilbertMar Cut Ceramic Tile like a pro!
I debated over the non slit blade, however this worked great!! Only draw back was the blade did not sit on my ginder snug so it had a small wobble, this could have been my fault for using cheap grinder. Still cut great with two hands on the grinder and shields up! I placed the tile on a 2x4..
July 27, 2016
Rated 5.0 out of 5.0 by blanstuf Great for cutting plaster
I used this to cut some plaster in a ceiling so I could run new wiring without replacing the entire ceiling. The blade cut great as long as I kept it as vertical as possible and didn't move too fast. It created a lot of dust but that was expected. The cuts were pretty straight as you can see in the photo. The cuts running parallel to the joist were made with this wheel, the perpendicular cuts were not that's why they aren't even. It didn't cut through the wooden lath but I didn't expect it to, that I cut with a circular saw. I think this blade will last a lot longer for a lot of my other projects.
April 16, 2015
Rated 4.0 out of 5.0 by Stewart Blade
Bladedoes whatis suppose to andi but them a lot. It is quality and I would recommend
March 30, 2016
Rated 4.0 out of 5.0 by Vicvan Excellent
Is in very good price and high quality
March 22, 2016
Rated 4.0 out of 5.0 by DIYguy Works for what I needed it to do
I needed it to cut some asbestos and concrete siding. This blade cut right through it and made a nice clean cut. One has to be careful as it will cut so easily that it will run away and make cuts where they are not needed.
It is also good for trimming out a little more if the cut is not wide enough.
So far I have made a lot of cuts through all kinds of stone including cement, asbestos, ceramic tile, stone tile, and just about ever masonry material one can think of. Other than very thick concrete it did a good job. Being that the blade is only 4 inches it will only cut about 2 inches into concrete because of the handle, motor, and guard on the tool.
December 8, 2015
Rated 5.0 out of 5.0 by DocDay Works great
Blade worked well, cutting the tile around the plumbing in my tile floor.
April 12, 2016
Rated 5.0 out of 5.0 by hsj901 Cutting tile with ease...
This 4" Turbo Diamond blade cut thru porcelain tiles with ease making my little project easier. Nice to have when needed....
April 5, 2016