Rated 4.4 out of 5 by 42
Rated 5.0 out of 5.0 by Dudecon Take it slow and it lasts for days
Cut a dozen yards of both brand new and thirty year old concrete. Cuts well, both wet and dry, and no noticeable blade degredation with cuts at about 3/4" deep and 1 yard per minute with frequent stops for cooling. If you push it too fast you'll smell the steel burning, but take it slow and this blade will last you for a good long while.
June 24, 2016
Rated 5.0 out of 5.0 by Jay Excellent blade
I bought one to cut the concrete driveway and didn't think it will last but I was surprised how long it lasted. I was able to cut 2 sidewalks and 20 by 120 feet driveway. After that I used it to cut hardie siding and still have about half of blade left. Excellent product for the money I spent
June 7, 2016
Rated 5.0 out of 5.0 by psawrench Awesome blade for concrete
I bought two of these blades thinking I'd be going through them quickly. I was wrong. I was cutting out a concrete walkway slab (NOT a paver) 5" thick, 2 cuts each about 36" long . I used a 2.5 amp Skill circular saw. Set the blade depth to 1 1/2" and started out cutting. Like a previous revue said, let the blade do the work. Cut through with ease and the saw barely slowed down. Made two more passes to the maximum depth the saw would allow and it never skipped a beat. Lots of dust, of course, but it sure made easy work on that concrete. Haven't taken the second blade out of the package yet...no need but will keep it handy just in case.
March 16, 2016
Rated 5.0 out of 5.0 by Ron Highly pleased with this blade cutting castle wall blocks
Used this blade in my 7 1/4 inch circular saw to cut many castle wall blocks to size for landscape project. Impressed by how easily it cut through the large solid concrete blocks. I also used blade to give a straight edge to one segment of an uneven sidewalk section.
May 17, 2016
Rated 5.0 out of 5.0 by AEP blade review
I was skeptical about a blade I had never heard of. Bought this to cut a trench in the concrete basement floor to get at a rotten cast iron drain pipe. I'm very happy with the results. I made about an 1 1/2 inch plunge and cut and it worked with no hesitation or kickback. I think I'll be able to get many more cuts with it in the future. Highly recommend.
April 6, 2016
Rated 5.0 out of 5.0 by Cliffdweller Stepping stone saw
Used this blade in a circular saw to cut stepping stones. Worked perfectly.
April 19, 2016
Rated 4.0 out of 5.0 by OldHomeDIYer Helped cut a couple of cement pavers
I had to make a couple of cuts in cement pavers to fit around a gutter downspout drain. I installed this blade on my Craftsman circular saw (the blade is 1/4" too small, but worked OK). This was far from an ideal set-up to cut the pavers, as the the saw wasn't that strong and the blade depth didn't cut all the way through, but I was able to slowly make the cuts and chisel off the remaining paver. The blade held up extremely well for the price, and I imagine it would work even better when used in more proper conditions.
February 14, 2016
Rated 4.0 out of 5.0 by Stan1 Good blade for cutting bricks
I used this blade in my skillsaw to cut through over a dozen bricks for a concrete column I was building. The blade worked well. Felt the blading was wearing out after a dozen bricks but by that time I was done with my project.
January 9, 2016