Model # 99201

Internet #202263941

Store SKU #740065

BEHR 1 gal. Concrete and Masonry Paint Stripper
0082474992074

BEHR

1 gal. Concrete and Masonry Paint Stripper

Frequently Bought Together

Product Overview

The Behr 1-Gallon Concrete and Masonry Paint Stripper helps remove multiple layers of paint, stain, epoxies and sealers from concrete and masonry surfaces. This remover has a quick and easy water cleanup.

California residents: see   Proposition 65 information

  • Helps remove multiple layers of paint, stains, epoxies and sealers from concrete and masonry
  • For indoor and outdoor use
  • Concentrated liquid formula
  • Quick and easy water clean up
  • Biodegradable
  • Subject to or will include a recycling fee in the following states: CA, OR, CT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

24 Questions35 Answers

Customer Questions & Answers

1 gal. Concrete and Masonry Paint Stripper
1 gal. Concrete and Masonry Paint Stripper

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Can it remove drylok colored on basement walls

This question is from 1 gal. Concrete and Masonry Paint Stripper
Asked by
Read all my Q&A
October 17, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
October 17, 2016
Answer: 
Hello DIYer,
Thanks for your question. Our stripper is able to remove water- or oil-based paints and stains as well as clear finishes and texture coatings. As long as the Drylok coating fits one of these product types, then our stripper should work on your basement walls. Please follow all label instructions for a successful outcome. Please note that this product has been discontinued in the US. Best Read More
Hello DIYer,
Thanks for your question. Our stripper is able to remove water- or oil-based paints and stains as well as clear finishes and texture coatings. As long as the Drylok coating fits one of these product types, then our stripper should work on your basement walls. Please follow all label instructions for a successful outcome. Please note that this product has been discontinued in the US. Best wishes!
-Joshua Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

How much it cost

This question is from 1 gal. Concrete and Masonry Paint Stripper
Asked by
Read all my Q&A
October 10, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 11, 2016
Answer: 
Thank you for your recent inquiry with The Home Depot. For further assistance regarding the pricing of this Concrete and Masonry Paint Stripper please contact your local Home Deport Store. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

looking foor a stripper to remove sealant from a color stamp concrete walk way

This question is from 1 gal. Concrete and Masonry Paint Stripper
Asked by
nl
Read all my Q&A
August 19, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
August 19, 2016
Answer: 
Hi giles,
We appreciate your interest in our products! We don't recommend using this product on colored concrete since it may remove the color. I recommend checking with Home Depot for a concrete stripper that is safe to use on colored concrete. Good luck with your project! - Sara
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Our patio was professionally stained. We want to remove all of the stain as it has worn off in places. Will this take the stain off?

This question is from 1 gal. Concrete and Masonry Paint Stripper
Asked by
Rockport , TX
Read all my Q&A
July 13, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
July 14, 2016
Answer: 
Hi JenRock,
Yes, the Paint Stripper can remove paints, epoxies, sealers, and stains! Best of luck!
Sincerely,
Cecille
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-31 T16:54:59.486-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202263941, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms
  • QUESTIONS, PRODUCT

Customer Reviews

1 gal. Concrete and Masonry Paint Stripper is rated 2.6 out of 5 by 43.
Rated 2 out of 5 by from Might work if your paint's already peeling I used this to try and strip an existing layer of concrete paint off an outdoor patio. The paint had started to chip in places and was starting to look terrible and I also didn't like the color, so I thought "Why not strip it and replace it with something brighter?" This was LITERALLY the worst decision I've ever made in my entire life and this project consumed 2+ months of my life that I'll never get back. I started by power washing the patio which removed a few chips and then followed the instructions for this product EXACTLY. This bubbled in a few places, but generally did absolutely nothing. I scrubbed with a wire brush and sander, re-applied NADA. I purchased 6+ bottles of this and got almost nowhere. Basically, it removed just enough paint to make the patio look worse and leave me in a weird limbo. Apparently, the previous owner applied the concrete paint in the appropriate way (with etcher) which made this useless. I ended up using Soygel with significantly more success. But if you're planning on undertaking a project similar to my own, may I suggest hiring someone to do it? Save yourself the frustration!
Date published: 2013-04-30
Rated 2 out of 5 by from Not as good as you think I ended up needing to by 2 gallons of this to take off 4 layers of paint on my outside steps so I could re do them (4 steps with a small landing - not more than 100 feet) You're not supposed to let the product dry however in the nicer temperature days that's literally impossible. It says on the container that it will strip the paint using just the hose - WRONG. Put this on the steps on a Saturday morning and by afternoon figured enough time had passed to clean it up however it wasn't. I could see the bubbling like it said though. I ended up using a pressure washer the next day without the product and I think is what worked better. Make sure if you use it you COVER everything, it's very toxic to grass, plants, flowers. We had to tarp everything off just to protect it and make sure you wear gloves.
Date published: 2013-06-11
Rated 2 out of 5 by from Behr-ly works I've done everything everyone said in other reviews (ie plastic covering to keep moist, waiting 4+ hours, etc) and I used this product on concrete with little success. I will say that it does work, but ONLY IN SMALL AREAS. If you are doing a large room get ready to buy 8 gallons and spend a month tackling the paint. After scraping the paint off, the primer underneath was much harder to get off and I was on my hands and knees will a wire brush, sponge, and mop bucket. For some reason a reapplication of the stripper does not want to "wither" the primer underneath the top coat of paint, so I've been scrubbing and sanding it. Like I said, this product is decent at best, but if you have a large room (mine was about 250-300 square feet), you are in for one heck of a messy, labor-intensive headache.
Date published: 2014-12-27
Rated 1 out of 5 by from PLEASE DONT! This is the WORST product I've ever used in my ENTIRE life! I was hesitant at first reading all the reviews thinking most didn't read. Well, I read. EVERYTHING! They guarantee the product and you can call about any problems/questions or a refund. Customer support had some friendly guys. George claims he's actually used the product with success. However I would only recommend this product for very small areas such as less than 70 sq ft. I've used 3 gallons of this junk and it's more labor intensive than anything else. This product is so bad it couldn't even remove white spots from priming and ceiling paint applied 2 weeks ago! I'm left with patches and bare pockets with after the elbow grease I've put in. PLEASE, I beg you to take heed from my horrible experience and avoid this. Save your money and important time as I can't get any of it back. Consider an alternative such as sanding or dry ice blasting. As the saying goes, once you paint concrete/brick, that's it. There's no going back.
Date published: 2014-05-04
Rated 2 out of 5 by from Garage floor -- sealer and paint stripper The Concrete Paint Stripper applies like a raw egg -- can be spread thin with lots of goop to drag. The best application method may be with a trowel because a brush just pushes the goo. It didnt work where I applied the product thinly, even though I kept working it to keep it wet. It did work where I put large 1/8 thick puddles. I was trying to mostly 'etch' some sealer in the floor where water seemed to still repel after deeply cleaning and using degreaser. Bottom line: If you are doing a large area, better off mechanically abrading and repainting (for paint) or using muriatic acid for etching. The product smells very strong - sometimes an indication of a powerful product - but not in this case. It may be useful for smaller projects. Application and cleanup is too difficult for a large area.
Date published: 2015-01-28
Rated 1 out of 5 by from Didn't work at all. This product didn't work at all for us. We put it on thick and kept the paint wet with this product for most of the day. In the end, the only paint that came off was because of heavy scraping. This product ruined our weekend. I imagine this wouldn't even take peanut butter off of a kid's face.
Date published: 2013-06-17
Rated 1 out of 5 by from Read the reviews before buying.... This product is a horrible waste of money. Used it in an attempt to strip paint off my basement floor (approx 300sqft). The previous owners of my home didn't prep the concrete properly prior to painting the floor and just slapped some paint on it. Bought 4 gallons, followed the instructions. I used a paint roller to apply and had a thick coat to the entire floor. I checked the progress once a hour and after 7 hours only about 1/4 of the paint had bubbled. Not once during this period had the product dried, the heavy coat I applied stayed wet. After almost 7 hours had passed I tried scrapping the paint off with both a floor scrapper and 4" paint scrapper....it would have been the same if I had'nt used this product and tried scrapping it dry.
Date published: 2015-03-30
Rated 5 out of 5 by from Some additional tips This product worked great to remove paint from a concrete floor. Here are some additional tips to make it work better: 1. After applying the stripper to a floor, cover it with a thin plastic drop cloth. This will keep the solution moist for a longer time. 2. Wait 4 hours before attempting to remove the paint. If you do #1 above, there should be no problem with it drying out in 4 hours. 3. When removing the softened paint, first use a scraper to remove as much as possible. Next, dip a wire brush into soapy water and scrub with that until all patches of paint are loose. Finally, use a sponge with clean water to wash the surface. If you do these things, you should be able to remove 1 or 2 layers of paint in one application.
Date published: 2011-05-12
  • y_2017, m_1, d_18, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_43
  • loc_, sid_202263941, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • REVIEWS, PRODUCT