BEHR Premium

Model # 90001

Internet # 203936915

1-Gal. #PFC-23 Tan 1-Part Epoxy Concrete and Garage Floor Paint

$31.98 /each

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # 90001

Internet # 203936915

The BEHR Premium 1-Part Epoxy is a high-performance, ready-to-use, water-based floor paint that resists hot tire pick-up and marring. The finish is highly resistant to chemicals, oil and gasoline, which reduces the need for maintenance of hard-to-clean interior or exterior floors. This durable, satin finish floor paint also resists scuffing, fading, cracking, peeling and blistering. Ideal for use on garage floors, driveways, basements, porches and pool decks.

California residents: see  Proposition 65 information

  • Ideal for interior and exterior concrete floors
  • Resists scuffing, fading, cracking and peeling
  • Resists chemicals and hot tire pick-up
  • Epoxy acrylic formula
  • Available in custom colors and computerized color matching
  • 300 - 500 sq. ft. of coverage per gallon
  • Durable Satin finish
  • Easy, no-mix formula
  • Easy clean-up with soap and water
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Container Size 
1 GA-Gallon 
Coverage Area (sq. ft.) 
500 
Details
Application Method 
Roller 
Application Method 
Roller 
Chemical resistant 
Yes 
Coating Product Category 
Paint 
Color Family 
Browns / Tans 
Color/Finish 
Tan 
Dry to touch (min.) 
120.0 
Interior/Exterior 
Exterior,Interior 
Mildew Resistant 
No 
Number of components in formula 
1-part 
Paint/Stain Base Material 
Epoxy/2 part 
Paint/Stain Clean Up 
Soap & Water 
Paint/Stain Key Features 
Chemical Resistant,Prevents hot tire pickup,Primer Required,Skid Resistant 
Paint/Stain/Waterproofer Product Type 
Basement, Floor & Garage 
Primer required 
Yes 
RGB Value 
203:172:144 
Returnable 
Non-Returnable 
Skid Resistant 
Yes 
Substrate/Surface Use Type 
Concrete/Brick/Masonry/Stone 
Time before recoating (hours) 
24.0 
Transparency 
Solid 
Warranty / Certifications
Manufacturer Warranty 
Limited Warranty 

MORE PRODUCTS WITH THESE FEATURES

Price: $30 - $40
Brand: BEHR Premium
Review Rating: 3 & Up
Color Family: Browns / Tans
Container Size: 1 GA-Gallon
Coverage Area (sq. ft.): 500
Mildew Resistant: No
Search
2 Questions4 Answers

Customer Questions & Answers

1-Gal. #PFC-23 Tan 1-Part Epoxy Concrete and Garage Floor Paint
1-Gal. #PFC-23 Tan 1-Part Epoxy Concrete and Garage Floor Paint

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

how much flakes do you need for 1 gal of paint?

This question is from 1-Gal. #PFC-23 Tan 1-Part Epoxy Concrete and Garage Floor Paint
Asked by
New Mexico
Read all my Q&A
June 25, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Independence, MO
Read all my Q&A
July 7, 2015
Answer: 
Actually, the answer to this question depends on the look you want. If you want a "terrazzo" tile look, you will probably use 3 or 4 bags of the "flakes" per gallon of paint. I would buy the 3 or 4 bags of flakes, as they will keep for another project, and keep playing with your first project till you get it the way you want it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
June 27, 2014
Answer: 
Hi Cowgirl,
Thank you for your interest in our Behr Premium Decorative Flakes and 1-Part Epoxy Concrete & Garage Floor Paint. Our Decorative Flakes can cover up to 125-250 sq. ft. per pouch. If you are planning to use Decorative Flakes over our Behr Premium 1-Part Epoxy (paint coverage is between 300 - 500 sq. ft. per gallon) 1 - 2 pouches of Decorative Flakes would be ideal.
Thank you and good luck Read More
Hi Cowgirl,
Thank you for your interest in our Behr Premium Decorative Flakes and 1-Part Epoxy Concrete & Garage Floor Paint. Our Decorative Flakes can cover up to 125-250 sq. ft. per pouch. If you are planning to use Decorative Flakes over our Behr Premium 1-Part Epoxy (paint coverage is between 300 - 500 sq. ft. per gallon) 1 - 2 pouches of Decorative Flakes would be ideal.
Thank you and good luck with your project! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

With the #PFC-23, does old paint need to be scraped off?

This question is from 1-Gal. #PFC-23 Tan 1-Part Epoxy Concrete and Garage Floor Paint
Asked by
Tucson AZ
Read all my Q&A
May 28, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Independence, MO
Read all my Q&A
Home Improvement Profile: DIYer
July 7, 2015
Answer: 
Scrape only if the old paint is loose. Always start with a clean surface. Apply the concrete primer/sealer about 24 hours before you want to paint. If you follow the first 2 steps, your concrete paint will glide on effortlessly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
May 28, 2014
Answer: 
Hi Zeke,
Thanks for your interest in our Behr Premium 1-Part Epoxy concrete & Garage Floor Paint. If the majority of the floor has loose or peeling paint, it may be necessary to completely strip the entire surface with Behr Premium NO. 992 Concrete & Masonry Paint Stripper. If the majority of the floor is in good condition then you may only need to remove any loose or peeling paint and scuff sand the Read More
Hi Zeke,
Thanks for your interest in our Behr Premium 1-Part Epoxy concrete & Garage Floor Paint. If the majority of the floor has loose or peeling paint, it may be necessary to completely strip the entire surface with Behr Premium NO. 992 Concrete & Masonry Paint Stripper. If the majority of the floor is in good condition then you may only need to remove any loose or peeling paint and scuff sand the surface. Any previously coated area in good sound condition can be coated over. Use a product such as Behr Premium No 991 Cleaner Etcher to clean and etch any bare concrete surfaces. Follow with a product such as Behr Premium No. 880 Concrete & Masonry Bonding Primer to spot prime. Please refer to the product labels for proper surface preparation and application instructions. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-05-28 T17:55:12.852-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203936915, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 107ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 3.6 out of 5 by 41 reviewers.
Rated 1.0 out of 5.0 by Not Acceptable for Garage Traffic This was the second garage floor that I had applied an epoxy finish. Surface prep included power wash the slab followed with an acid wash (weak solution of muratic acid). I applied two coats of Behr Premium 1-Part Epoxy Concrete and Garage Floor Paint. I allowed two days drying time between coats. After final application the garage was left undisturbed while on a 10 day vacation. See the photos where the heat from the tires have completely pulled paint from the garage floor. I am not inclined to use this product again. June 12, 2014
Rated 1.0 out of 5.0 by Waste of time and money Followed the directions to the letter. Power washed the carport, etched it with Behr etcher, applied Behr primer. Put on 2 coats of paint.,waited 2 weeks before we drove on it. Now after 8 months it's all coming off where the car tires contact the surface.Looks terrible. Absolute junk...last time I would buy Behr products. All the work gone to waste March 25, 2016
Rated 1.0 out of 5.0 by DO NOT USE! Ever...! Run away from this product! The fact that there are five star reviews is a travesty. I purchased a house where it had been used recently, and within three weeks of closing it started to peel EVERYWHERE. Removal from concrete is expensive, imperfect, and awful. Just read the product's label! It says DO NOT use where exposed to "hydrostatic pressure." That means "the weight of water." But it's billed as "exterior" paint, perfect for pool side patios. Buy something better (which will most likely mean more expensive; this is an inappropriate price point for exterior walkway or patio paint). If you don't, it will be an expensive mistake. May 3, 2016
Rated 5.0 out of 5.0 by Works Great! After applying the primer/sealer, this concrete paint went only very easily. The coverage was great with only one coat. Would highly recommend. July 7, 2015
Rated 1.0 out of 5.0 by Do Not Use Purchased this for our garage floor and our basement floor. Turned out OK on our basement floor. Our garage floor is horrible. We followed instructions exactly. We didn't put anything heavy in our garage for over a month - didn't even park our cars in it since we wanted to make sure it set and wouldn't peel up. Even two months after the application, we were still finding new spots where the paint came off. It especially is coming off under our tires. We don't even have huge, heavy cars! Now we're waiting through the winter but have to figure out how to fix it when the weather gets nicer. It'll be hard to fix just the spots since the speckling/painting will become uneven. I would not recommend this product. February 15, 2016
Rated 1.0 out of 5.0 by Something wrong with this product I have used this paint several times with great success however something has changed. It now takes twice as much as before to cover an area and repeated coatings. The worst part is the pigments separate after product is applied to the floor so it looks streaked. I could not believe my eyes. At first I figured it was me so I stirred the paint thoroughly then put a small amount in the pan stirred it again and then almost immediately the pigments began to separate. This was product I used hours after purchase. February 15, 2016
Rated 3.0 out of 5.0 by Not your best product Did a basement re-do. Painted walls with Behr's waterproof paint over a previous coat of Drylock. Covered well and looks good. Re-painted my basement floor after thirty years with an acrylic enamel from another mfgr. Cleaned the floor, used Behr's Cleaner and Etcher to scrub it again. Put down two coats with a several-day dry time between. Project dragged out over several months, but the first areas done already are wearing through the new paint. Usage is only with an office chair with casters, and slippers or sneakers. The rest of my house has been painted with Behr's products, sometimes more than once, with great results. Very disappointed in the basement paint. May 18, 2015
Rated 5.0 out of 5.0 by Wow...what a difference! Garage floor was stained, not real pretty looking around, thought "what a pity" it needs an uplift and pretty quick Behr floor paint did the trick! Now it looks great and didn't take long using Behr paint, I'll never go wrong inside or out, painting is best recommend it today...just.put it to test :) September 18, 2015
  • 2016-05-28 T16:14:48.276-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_41, tr_41
  • loc_en_US, sid_203936915, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT