BEHR Premium

Model 93001

Internet #203936924

1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint

$31.98 /each

Frequently Bought Together

Product Overview

The BEHR Premium 1-Part Epoxy is a high-performance, ready-to-use, water-based floor paint that resists hot tire pick-up and marring. The finish is highly resistant to chemicals, oil and gasoline, which reduces the need for maintenance of hard-to-clean interior or exterior floors. This durable, satin finish floor paint also resists scuffing, fading, cracking, peeling and blistering. Ideal for use on garage floors, driveways, basements, porches and pool decks.

California residents: see   Proposition 65 information

  • Ideal for interior and exterior concrete floors
  • Resists scuffing, fading, cracking and peeling
  • Resists chemicals and hot tire pick-up
  • Epoxy acrylic formula
  • Available in custom colors and computerized color matching
  • 300 - 500 sq. ft. of coverage per gallon
  • Durable Satin finish
  • Easy, no-mix formula
  • Easy clean-up with soap and water
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions4 Answers

Customer Questions & Answers

1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
 
1 answer

Do I need a primer to be put down first?

This question is from 1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
Asked by
Read all my Q&A
May 11, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
May 13, 2016
Answer: 
Hi Andy, Thank you for your question! New concrete must cure for a minimum of 30 days.
For proper penetration and adhesion of topcoat, use a
product such as a muriatic acid to clean and etch the
surface. Follow all label instructions. Apply a product such
as BEHR PREMIUM® Concrete & Masonry Bonding Primer
No. 880 to increase adhesion of topcoat to the surface.
Follow all label instructions.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
 
1 answer

Does this have a sealer?

This question is from 1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
Asked by
Read all my Q&A
November 23, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
November 24, 2015
Answer: 
Hello and thanks for your question. The optional sealers we offer are No. 985 Wet Look Sealer or No. 986 Low-Lustre Sealer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
 
1 answer

Can you use this on inferior tile floor that is not in traffic area and does not get wet? How dark is the brown?

This question is from 1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
Asked by
Read all my Q&A
November 20, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
November 24, 2015
Answer: 
Hi Jane. Thanks for your question. It will not work on tiles because the surface is too smooth.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
 
1 answer

what is coverage per gallon?

This question is from 1-Gal. #PFC-25 Dark Walnut 1-Part Epoxy Concrete and Garage Floor Paint
Asked by
Read all my Q&A
January 8, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
January 13, 2015
Answer: 
Hello and thank you for your question. BEHR PREMIUM® 1-Part Epoxy Concrete & Garage Floor Paint has a rough surface spread rate of 300-400 Sq. Ft. per gallon and a smooth spread rate of 400-500 Sq. Ft.. Hope this helps and good luck on your project!
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
1 of 1
  • 2016-09-08 T13:05:54.792-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203936924, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.7 out of 5 by 40 reviewers.
Rated 5.0 out of 5.0 by Impressive Make Over This paint was applied with a brush (my preference) as some areas of my concrete is pitted due to 100 years of service. It brushed on smoothly and quickly. Clean up was a snap and everyone who has come over to look at the project has been impressed with the "makeover". February 10, 2016
Rated 1.0 out of 5.0 by Waste of time and money Followed the directions to the letter. Power washed the carport, etched it with Behr etcher, applied Behr primer. Put on 2 coats of paint.,waited 2 weeks before we drove on it. Now after 8 months it's all coming off where the car tires contact the surface.Looks terrible. Absolute junk...last time I would buy Behr products. All the work gone to waste March 25, 2016
Rated 5.0 out of 5.0 by Ignore the bad reviews I painted my basement floor 3 years ago and it looks like the day I finished painting, even in high traffic areas. Success with these coatings is 100% dependent on following instructions and prepping the floor correctly. I can guarantee that the guy who brought the house and had peeling paint had a previous owner who slapped a coat on to look good, but failed to clean, degrease, and etch properly. This is great paint. [This review was collected as part of a promotion.] July 9, 2016
Rated 1.0 out of 5.0 by DO NOT USE! Ever...! Run away from this product! The fact that there are five star reviews is a travesty. I purchased a house where it had been used recently, and within three weeks of closing it started to peel EVERYWHERE. Removal from concrete is expensive, imperfect, and awful. Just read the product's label! It says DO NOT use where exposed to "hydrostatic pressure." That means "the weight of water." But it's billed as "exterior" paint, perfect for pool side patios. Buy something better (which will most likely mean more expensive; this is an inappropriate price point for exterior walkway or patio paint). If you don't, it will be an expensive mistake. May 3, 2016
Rated 1.0 out of 5.0 by Do Not Use Purchased this for our garage floor and our basement floor. Turned out OK on our basement floor. Our garage floor is horrible. We followed instructions exactly. We didn't put anything heavy in our garage for over a month - didn't even park our cars in it since we wanted to make sure it set and wouldn't peel up. Even two months after the application, we were still finding new spots where the paint came off. It especially is coming off under our tires. We don't even have huge, heavy cars! Now we're waiting through the winter but have to figure out how to fix it when the weather gets nicer. It'll be hard to fix just the spots since the speckling/painting will become uneven. I would not recommend this product. February 15, 2016
Rated 1.0 out of 5.0 by Something wrong with this product I have used this paint several times with great success however something has changed. It now takes twice as much as before to cover an area and repeated coatings. The worst part is the pigments separate after product is applied to the floor so it looks streaked. I could not believe my eyes. At first I figured it was me so I stirred the paint thoroughly then put a small amount in the pan stirred it again and then almost immediately the pigments began to separate. This was product I used hours after purchase. February 15, 2016
Rated 3.0 out of 5.0 by Not your best product Did a basement re-do. Painted walls with Behr's waterproof paint over a previous coat of Drylock. Covered well and looks good. Re-painted my basement floor after thirty years with an acrylic enamel from another mfgr. Cleaned the floor, used Behr's Cleaner and Etcher to scrub it again. Put down two coats with a several-day dry time between. Project dragged out over several months, but the first areas done already are wearing through the new paint. Usage is only with an office chair with casters, and slippers or sneakers. The rest of my house has been painted with Behr's products, sometimes more than once, with great results. Very disappointed in the basement paint. [This review was collected as part of a promotion.] May 18, 2015
Rated 5.0 out of 5.0 by Wow...what a difference! Garage floor was stained, not real pretty looking around, thought "what a pity" it needs an uplift and pretty quick Behr floor paint did the trick! Now it looks great and didn't take long using Behr paint, I'll never go wrong inside or out, painting is best recommend it today...just.put it to test :) [This review was collected as part of a promotion.] September 18, 2015
  • 2016-09-08 T14:19:02.533-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_40, tr_40
  • loc_en_US, sid_203936924, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT